Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) (RPTU in Kaiserslautern)
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau
- 0631/2017-0
Heimbs, Sebastian; Schmeer, Sebastian; Blaurock, Jörg et al.
Static and dynamic failure behaviour of bolted joints in carbon fibre compositesComposites Part A: Applied Science and Manufacturing. Bd. 47. Elsevier Ltd. 2013 S. 91 - 101
Zhu, Dong Yu; Wetzel, Bernd; Noll, Andreas et al.
Thermo-molded self-healing thermoplastics containing multilayer microreactorsJournal of Materials Chemistry A. Bd. 1. H. 24. Royal Society of Chemistry (RSC) 2013 S. 7191 - 7198
Grishchuk, S.; Bonyar, A.; Elsäßer, J. et al.
Toward reliable morphology assessment of thermosets via physical etching: Vinyl ester resin as an exampleeXPRESS Polymer Letters. Bd. 7. H. 5. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2013 S. 407 - 415
Zhang, G.; Burkhart, T.; Wetzel, Bernd
Tribological behavior of epoxy composites under diesel-lubricated conditionsWear. Bd. 307. H. 1-2. Elsevier B.V. 2013 S. 174 - 181
Schuster, J.; Duhovic, Miro; Bhattacharyya, D.
Chapter 1: Manufacturing and Processing of Polymer CompositesBhattacharyya, Debes ; Fakirov, Stoyko (Hrsg). Synthetic polymer-polymer composites. München ; Cincinnati, Ohio: Hanser 2012 S. 1 - 38
Duhovic, Miro; Fakirov, S.; Holschuh, R. et al.
Chapter 19: Micro-and Nanofibrillar Single Polymer CompositesFakirov, Stoyko u. a. (Hrsg). Synthetic Polymer-Polymer Composites. München u. a.: Hanser 2012 S. 641 - 672
Advani, Suresh G.; Hsiao, Kuang-Ting; Liu, Shih-Jung et al.
Contributor contact detailsManufacturing Techniques for Polymer Matrix Composites (PMCs). Amsterdam: Elsevier 2012 S. 435 - 480
Gurka, Martin; Hübler, Moritz; Schmeer, Sebastian et al.
Conference on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2012). Load-Initiated Two-Way Effect of Shape Memory Alloys in Composite Structures and a Phenomenological Modelling ApproachVolume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring. Stone Mountain: American Society of Mechanical Engineers 2012
Adeosun, S. O.; Akpan, E. I.; Sekunowo, O. I. et al.
Mechanical Characteristics of 6063 Aluminum-Steel Dust CompositeISRN Mechanical Engineering. Bd. 2012. Hindawi Limited 2012 S. 1 - 9
Duhovic, M.; Fakirov, S.; Holschuh, R. et al.
Micro- and Nanofibrillar Single Polymer CompositesSynthetic Polymer-Polymer Composites. München: Hanser 2012 S. 641 - 672
Villegas, Irene Fernandez; Moser, Lars; Yousefpour, Ali et al.
Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic compositesJournal of Thermoplastic Composite Materials. Bd. 26. H. 8. SAGE Publications 2012 S. 1007 - 1024
Adeosun, S. O.; Lawal, G. I.; Balogun, S. A. et al.
Review of Green Polymer NanocompositesJournal of Minerals and Materials Characterization and Engineering. Bd. 11. H. 4. Scientific Research Publishing, Inc. 2012 S. 385 - 416
Akpan, Emmanuel I.; Haruna, Idoko A.
Structural Evolution and Properties of Hot Rolled Steel AlloysJournal of Minerals and Materials Characterization and Engineering. Bd. 11. H. 4. Scientific Research Publishing, Inc. 2012 S. 417 - 426
HOLSCHUH, RENÉ; BECKER, DAVID; MITSCHANG, PETER
Verfahrenskombination für mehr Wirtschaftlichkeit des FVK-Einsatzes im AutomobilbauLightweight Design. Bd. 5. H. 4. Springer Science and Business Media LLC 2012 S. 14 - 19
Adeosun, S. O.; Akpan, E. I.; Balogun, S. A.
Wrought Aluminium Alloy Corrosion Propensity in Domestic Food Cooking EnvironmentISRN Corrosion. Bd. 2012. Hindawi Limited 2012 S. 1 - 6
Gurka, Martin; Petričević, Raino; Schneider, Steffen et al.
Characterization of Step Response Time and Bandwidth of Electrorheological FluidsJournal of Intelligent Material Systems and Structures. Bd. 22. H. 15. SAGE Publications 2011 S. 1745 - 1748
Au, K. F.; Mielicka, E.; Cooke, B. et al.
Contributor contact detailsAdvances in Knitting Technology. Amsterdam: Elsevier 2011 S. 11 - 12 (Textiles)
Duhovic, M.; Bhattacharyya, D.
Knitted fabric compositesAdvances in Knitting Technology. UK: Elsevier 2011 S. 193 - 212 (Textiles)
Buhl, Stefan; Donhauser, Tobias
Konstruktion einer Kurbelwelle für den RS11ATZ extra. Bd. 16. H. 12. Springer 2011 S. 38 - 45
Balle, Frank; Schmeer, Sebastian; Wagner, Guntram
Mechanische Charakterisierung ultraschallgeschweißter Aluminium/CFK-Verbunde bei automobilrelevanten Temperaturen und PrüfgeschwindigkeitenMaterials Testing. Bd. 53. H. 1-2. Carl Hanser Verlag 2011 S. 7 - 13
Duhovic, Miro; Mitschang, Peter; Bhattacharyya, D.
Modelling approach for the prediction of stitch influence during woven fabric drapingComposites Part A: Applied Science and Manufacturing. Bd. 42. H. 8. Elsevier BV 2011 S. 968 - 978
Fakirov, Stoyko; Duhovic, Miro; Maitrot, Philipp et al.
From PET Nanofibrils to Nanofibrillar Single-Polymer CompositesMacromolecular Materials and Engineering. Bd. 295. H. 6. Wiley 2010 S. 515 - 518
Khan, Muhammad Amir; Mitschang, Peter; Schledjewski, Ralf
Identification of some optimal parameters to achieve higher laminate quality through tape placement processAdvances in Polymer Technology. Bd. 29. H. 2. Wiley 2010 S. 98 - 111
Gebhard, Andreas; Bayerl, Thomas; Schlarb, Alois K. et al.
Increased wear of aqueous lubricated short carbon fiber reinforced polyetheretherketone (PEEK/SCF) composites due to galvanic fiber corrosionWear. Bd. 268. H. 7-8. Elsevier B.V. 2010 S. 871 - 876
Gurka, Martin; Johnston, L.; Petricevic, R.
New Electrorheological Fluids — Characteristics and Implementation in Industrial and Mobile ApplicationsJournal of Intelligent Material Systems and Structures. Bd. 21. H. 15. SAGE Publications 2010 S. 1531 - 1535
Mitschang, Peter
Prozessvariable Entwicklung von Faser-Kunststoff-Verbunden auf PBT-Basis : Pro-PBT-Abschlussbericht ; BMBF-Projekt Förderkreiskennzeichen: 03X3009HKaiserslautern: IVW 2010 95 S. (IVW-Schriftenreihe ; Bd. 91)
Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten HybridverbindungenKaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)
Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten HybridverbindungenKaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)
Yang, C C; Duhovic, M; Lin, R J T et al.
Finite element modelling and analysis of composites toecapsIOP Conference Series: Materials Science and Engineering. Bd. 4. IOP Publishing 2009 S. 12010
Gebhard, Andreas; Bayerl, Thomas; Schlarb, Alois K. et al.
Galvanic corrosion of polyacrylnitrile (PAN) and pitch based short carbon fibres in polyetheretherketone (PEEK) compositesCorrosion Science. Bd. 51. H. 11. Elsevier B.V. 2009 S. 2524 - 2528
Duhovic, Miro; Horbach, Sebastian; Bhattacharyya, Debes
Improving the Interface Strength in Flax Fibre Poly(lactic) Acid CompositesJournal of Biobased Materials and Bioenergy. Bd. 3. H. 2. American Scientific Publishers 2009 S. 188 - 198
Schmeer, Stefan; Steeg, M.; Maier, M. et al.
Metal Fibre Reinforced Composite – Potentialities and TasksAdvanced Composites Letters. Bd. 18. H. 2. SAGE Publications 2009 S. 45 - 52
Duhovic, Miro; Bhattacharyya, Debes; Fakirov, Stoyko
Nanofibrillar Single Polymer Composites of Poly(ethylene terephthalate)Macromolecular Materials and Engineering. Bd. 295. H. 2. Wiley 2009 S. 95 - 99
Gurka, Martin; Adams, D.; Johnston, L. et al.
New electrorheological fluids — characteristics and implementation in industrial and mobile applicationsJournal of Physics: Conference Series. Bd. 149. IOP Publishing 2009 S. 1 - 6
Duhovic, Miro; Maitrot, Philipp; Fakirov, Stoyko
Polyamide 66 Polymorphic Single Polymer CompositesThe Open Macromolecules Journal. Bd. 3. H. 1. Bentham Science Publishers Ltd. 2009 S. 37 - 40
Knör, N.; Gebhard, Andreas; Haupert, F. et al.
Polyetheretherketone (PEEK) nanocomposites for extreme mechanical and tribological loadsMechanics of Composite Materials. Bd. 45. H. 2. Springer Science and Business Media LLC 2009 S. 199 - 206
Schlimbach, Jens; Ogale, A.; Schimmel, S.
Quickstep processing to control exothermic reaction during the manufacture of thick laminatesPlastics, Rubber and Composites. Bd. 38. H. 9-10. Informa UK Limited 2009 S. 374 - 378
Schuster, Martina; Ogale, Amol; Peetz, Ludwig et al.
Analysis of sewed preforms by visual on-line monitoring of stitch-hole variations under compactionComposite Science and Technology. Bd. 68. H. 1. 2008 S. 312 - 320
Gebhard, Andreas; Haupert, Frank; Schlarb, Alois K.
Development of nanostructured slide coatings for automotive componentsFriedrich, Klaus u. a. (Hrsg). Tribology of Polymeric Nanocomposites : Friction and Wear of Bulk Materials and Coatings. Amsterdam u. a.: Elsevier 2008 S. 439 - 457 (Tribology and interface engineering series ; 55)
Philipp, Martine; Gervais, P. C.; Sanctuary, Roland et al.
Effect of mixing sequence on the curing of amine-hardened epoxy/ alumina nanocomposites as assessed by optical refractometryExpress Polymer Letters. Bd. 2. H. 8. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2008 S. 546 - 552
DUHOVIC, M.; PETERSON, S.; JAYARAMAN, K.
Natural-fibre–biodegradable polymer composites for packagingProperties and Performance of Natural-Fibre Composites. UK: Elsevier 2008 S. 301 - 329
Molnár, P.; Ogale, A.; Lahr, Robert et al.
Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoformingComposites Science and Technology. Bd. 67. H. 15-16. Elsevier B.V. 2007 S. 3386 - 3393
Molnar, P.; Ogale, A.; Lahr, Robert et al.
Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoformingComposites Science and Technology. Bd. 67. H. 15-16. 2007 S. 3386 - 3393
Hallouet, Beatrice; Wetzel, Bernd; Pelster, Rolf
On the Dielectric and Magnetic Properties of NanocompositesJournal of Nanomaterials. Bd. 2007. Hindawi Limited 2007 034527
Lahr, Robert
Partielles Thermoformen endlosfaserverstärkter ThermoplasteKaiserslautern: IVW 2007 125 S. (IVW-Schriftenreihe ; Bd. 73)
Heimbs, Sebastian; Schmeer, Sebastian; Middendorf, Peter et al.
Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structuresComposites Science and Technology. Bd. 67. H. 13. Elsevier B.V. 2007 S. 2827 - 2837
Sanctuary, Roland; Baller, Joerg; Krüger, Jan Kristian et al.
Complex specific heat capacity of two nanocomposite systemsThermochimica Acta. Bd. 445. H. 2. Elsevier B.V. 2006 S. 111 - 115
Wetzel, Bernd; Rosso, Patrick; Haupert, Frank et al.
Epoxy nanocomposites – fracture and toughening mechanismsEngineering Fracture Mechanics. Bd. 73. H. 16. Elsevier B.V. 2006 S. 2375 - 2398
Lahr, Robert; Mang, Peter; Mitschang, Peter et al.
Induktionsschweißen –ein innovatives Verfahren zum dreidimensionalen Fügen von thermoplastischen Faser-Kunststoff-Verbunden.IVW Kolloquium 2006. Kaiserslautern: IVW 2006 S. 118 - 119
Wetzel, Bernd
Mechanische Eigenschaften von Nanoverbundwerkstoffen aus Epoxydharz und keramischen NanopartikelnKaiserslautern: IVW 2006 171 S. (IVW-Schriftenreihe ; Bd. 69)
Schlimbach, Jens
Ökonomische Prozessanalyse und Modellintegration zur Kostenberechnung von Faser-Kunststoff-VerbundenKaiserslautern: IVW 2006 130 S. (IVW-Schriftenreihe ; Bd. 64)
Duhovic, Miro; Bhattacharyya, D.
Simulating the deformation mechanisms of knitted fabric compositesComposites Part A: Applied Science and Manufacturing. Bd. 37. H. 11. Elsevier B.V. 2006 S. 1897 - 1915
Duhovic, Miro; Bhattacharyya, Debes
Deformation Mechanisms in Knitted Fabric CompositesFriedrich, Klaus ; Fakirov, Stoyko ; Zhang, Zhong (Hrsg). Polymer Composites : From Nano- to Macro-Scale. Boston, MA: Springer US 2005 S. 265 - 288
Liudmyla, Gryshchuk; Lyudmila, Vretik; Vladimir, Syromyatnikov
Photochemical Transformations of p-(methacryloyloxy)-N-phenylimides and their Polymers Under the Action of UV-LightMolecular Crystals and Liquid Crystals. Bd. 427. H. 1. Informa UK Limited 2005 S. 127 - 137
Haupert, Frank; Wetzel, Bernd
Reinforcement of Thermosetting Polymers by the Incorporation of Micro- and NanoparticlesFriedrich, Klaus ; Fakirov, Stoyko ; Zhang, Zhong (Hrsg). Polymer Composites : From Nano- to Macro-Scale. Boston, MA: Springer US 2005 S. 45 - 62
Krüger, Jan Kristian; Müller, Ulrich; Bactavatchalou, Ravi et al.
The generalized Cauchy relation as an universal property of the amorphous stateJournal de Physique IV (Proceedings). Bd. 129. EDP Sciences 2005 S. 45 - 49
Goda, Tibor; VÁradi, KÁroly; Wetzel, Bernd et al.
Finite Element Simulation of the Fiber– Matrix Debonding in Polymer Composites Produced by a Sliding Indentor: Part II – Parallel and Anti-Parallel Fiber OrientationJournal of Composite Materials. Bd. 38. H. 18. SAGE Publications 2004 S. 1607 - 1618
Friedrich, Klaus; Goda, Tibor; Varadi, Karoly et al.
Finite Element Simulation of the Fiber–Matrix Debonding in Polymer Composites Produced by a Sliding Indentor: Part I – Normally Oriented FibersJournal of Composite Materials. Bd. 38. H. 18. SAGE Publications 2004 S. 1583 - 1606
Mitschang, Peter
Prozessentwicklung und ganzheitliches Leichtbaukonzept zur durchgängigen, abfallfreien Preform-RTM-Fertigung : Pro-Preform-RTM - Abschlussbericht ; BMBF-Projekt. Förderkennzeichen: 02PP2460Kaiserslautern: IVW 2004 167 S. (IVW-Schriftenreihe ; Bd. 46)
Shi, Guang; Zhang, Ming Qiu; Rong, Min Zhi et al.
Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatmentsWear. Bd. 256. H. 11-12. Elsevier BV 2004 S. 1072 - 1081
Rong, Min Zhi; Luo, Ying; Zhang, Ming Qiu et al.
Surface Grafting of Nano-SiC with Glycidyl Methacrylate in Emulsion and Its Effect on the Tribological Performance of Epoxy CompositesComposite Technologies for 2020. Basel: Elsevier 2004 S. 571 - 576
Lu, Jin; Zhang, Ming Qiu; Rong, Min Zhi et al.
Thermal stability of frictional surface layer and wear debris of epoxy nanocomposites in relation to the mechanism of tribological performance improvementJournal of Materials Science. Bd. 39. H. 11. Springer Science and Business Media LLC 2004 S. 3817 - 3820
Ji, Qiu Long; Zhang, Ming Qiu; Rong, Min Zhi et al.
Tribological properties of surface modified nano-alumina/epoxy compositesJournal of Materials Science. Bd. 39. H. 21. Springer Science and Business Media LLC 2004 S. 6487 - 6493
Stöven, T.; Weyrauch, F.; Mitschang, Peter et al.
Continuous monitoring of three-dimensional resin flow through a fibre preformComposites Part A: Applied Science and Manufacturing. Bd. 34. H. 6. Elsevier B.V. 2003 S. 475 - 480
Wetzel, Bernd; Haupert, Frank; Qiu Zhang, Ming
Epoxy nanocomposites with high mechanical and tribological performanceComposites Science and Technology. Bd. 63. H. 14. Elsevier B.V. 2003 S. 2055 - 2067
Shi, Guang; Zhang, Ming Qiu; Rong, Min Zhi et al.
Friction and wear of low nanometer Si3N4 filled epoxy compositesWear. Bd. 254. H. 7-8. Elsevier BV 2003 S. 784 - 796
Rong, Min Zhi; Zhang, Ming Qiu; Shi, Guang et al.
Graft polymerization onto inorganic nanoparticles and its effect on tribological performance improvement of polymer compositesTribology International. Bd. 36. H. 9. Elsevier BV 2003 S. 697 - 707
Gryshchuk, LYu; Vretik, LO; Syromyatnikov, VG et al.
Photoinitiated radical polymerization of some substituted tetrahydrophthalimido and maleimidophenyl methacrylatesPolymer International. Bd. 53. H. 1. Wiley 2003 S. 27 - 32
Mitschang, Peter; Ogale, A.; Schlimbach, Jens et al.
Preform Technology: A Necessary Requirement for Quality Controlled LCM-ProcessesPolymers and Polymer Composites. Bd. 11. H. 8. SAGE Publications 2003 S. 605 - 622
Gryshchuk, Liudmyla; Vretik, Lyudmyla; Syromyatnikov, Vladimir Georgiyevich
Proceedings: 4th International Conference on Electronic Processes in Organic Materials - ICEPOM-4. Dependence of polymerization ability of maleimidophenyl methacrylates on π-electron structure of maleimide fragmentsBd. 20. H. 3. Wrocław. 2002
Zhang, Ming Qiu; Rong, Min Zhi; Yu, Shu Li et al.
Effect of particle surface treatment on the tribological performance of epoxy based nanocompositesWear. Bd. 253. H. 9-10. Elsevier B.V. 2002 S. 1086 - 1093
Wetzel, Bernd; Haupert, Frank; Friedrich, Klaus et al.
Impact and wear resistance of polymer nanocomposites at low filler contentPolymer Engineering & Science. Bd. 42. H. 9. Wiley 2002 S. 1919 - 1927
Zhang, Ming Qiu; Rong, Min Zhi; Zeng, Han Min et al.
Atomic force microscopy study on structure and properties of irradiation grafted silica particles in polypropylene-based nanocompositesJournal of Applied Polymer Science. Bd. 80. H. 12. Wiley 2001 S. 2218 - 2227
Zhi Rong, Min; Qiu Zhang, Ming; Liu, Hong et al.
Microstructure and tribological behavior of polymeric nanocompositesIndustrial Lubrication and Tribology. Bd. 53. H. 2. Emerald 2001 S. 72 - 77
Eisert, F.; Gurka, Martin; Legant, A. et al.
Detection of Molecular Alignment in Confined FilmsScience. Bd. 287. H. 5452. American Association for the Advancement of Science (AAAS) 2000 S. 468 - 470
Rudolf, R.; Mitschang, Peter; Neitzel, M.
Induction heating of continuous carbon-fibre-reinforced thermoplasticsComposites Part A: Applied Science and Manufacturing. Bd. 31. H. 11. Elsevier B.V. 2000 S. 1191 - 1202
Breuer, Ulf; Ostgathe, M.; Neitzel, M.
Manufacturing of all-thermoplastic sandwich systems by a one-step forming techniquePolymer Composites. Bd. 19. H. 3. Wiley 1998 S. 275 - 279
Breuer, Ulf
Reinforcement of CFRP structures by tailored fibre placementPolymers and Polymer Composites. Bd. 6. H. 8. 1998 S. 499 - 504
Breuer, Ulf Paul
Beitrag zur Umformtechnik gewebeverstärkter ThermoplasteDüsseldorf: VDI-Verl. 1997 123 S. (Verein Deutscher Ingenieure: Fortschrittberichte VDI / Reihe 2, Fertigungstechnik ; Nr. 433)
Neitzel, Manfred; Breuer, Ulf
Die Verarbeitungstechnik der Faser-Kunststoff-VerbundeMünchen: Hanser 1997 191 S. (Studientexte Kunststofftechnik)
Mitschang, Peter; Sattler, Hans-Jürgen
Theoretische und experimentelle Untersuchungen zum Laufverhalten von NähmaschinengreifernDüsseldorf: VDI-Verl. 1990 97 S. (Verein Deutscher Ingenieure: Fortschrittberichte VDI / Reihe 1 / Konstruktionstechnik, Maschinenelemente ; Nr. 188)
Lemhus, D.; Hausmann, Joachim; von Hehl, Hohe, J. et al.
MaterialsMDPI AG