Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) (RPTU in Kaiserslautern) (Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau) - Publikationen

Jungbluth, Julia
Analysis of the effect of selective electrochemical etching of the shape memory alloy surface on the micromechanical interfacial behavior between the shape memory alloy wire and the epoxy polymer matrix
Kaiserslautern. 2025 (IVW-Schriftenreihe, Bd. 164)

Baumann, Andreas; Hausmann, Joachim
Effect of high-energy radiation on the relaxation of residual stresses in polycarbonate and epoxy resin by stress optics
Radiation Physics and Chemistry. Bd. 226. Elsevier 2025 112236

Baumann, Andreas
Factors controlling damage initiation in fatigue loaded unidirectional composites under the influence of different matrix properties
Kaiserslautern. 2025 (IVW-Schriftenreihe, Bd. 165)

Yagdjian, Harutyun; Gurka, Martin
One-dimensional N-layer thermal modelling for effective machine learning training data generation for nondestructive testing of composite parts with infrared thermography
Composites Part B: Engineering. Bd. 288. Elsevier 2025 111902

Yagdjian, Harutyun; Gurka, Martin
Alternative data evaluation methodology for infrared thermography analogous to the Shock Response Spectrum analysis method
NDT & E International. Bd. 146. Elsevier B.V. 2024 103154

Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
An anisotropic topology optimization procedure for continuous fiber reinforced polymer structures with biaxial fiber layout for improved intersection point design
Composite Structures. Bd. 337. Elsevier B.V. 2024 118064

Yagdjian, Harutyun; Lecompagnon, Julien; Hirsch, Philipp et al.
Application of the thermal shock response spectrum (TSRS) methodology to various forms of heat sources by pulse thermography and comparison by using a rotating line scan contour search algorithm
Journal of Applied Physics. Bd. 136. H. 17. AIP Publishing 2024

Dlugaj, Anna M.; de Vita, Corrado; Arrabiyeh, Peter A. et al.
Characterization of Sequential Trial‐Curable Off‐Stoichiometric Amine‐Epoxy Thermosets with Ionic Liquids
Macromolecular Symposia. Bd. 413. H. 4. Wiley 2024

Akpan, Emmanuel I.; Mohamadreza, Nasirzade T.; Pirro, Claudius et al.
Controlled Interlayer Binding and Healing Improve the Transverse Properties of Upcycled Disposable Waste Wood
Applied Materials & Interfaces. Bd. 1. American Chemical Society (ACS) 2024 S. 1 - 10

Rehra, Jan; Jungbluth, Julia; Katri, Bilal et al.
Damage and failure mechanisms of hybrid carbon fiber and steel fiber reinforced polymer composites
Composites Part A: Applied Science and Manufacturing. Bd. 185. Elsevier B.V. 2024 108366

Arrabiyeh, Peter A.; Dlugaj, Anna M.; Eckrich, Maximilian et al.
Designing an End Effector and a Thickness Adaptive Compression Molding Process for Wet Fiber Placement
Applied Composite Materials. Bd. 31. H. 4. Springer 2024 S. 1237 - 1258

Erdem, Ali O.; Stannek, Paul; Grundler, Marco et al.
Development of fiber reinforced compound bipolar foils for fuel cells
Journal of Energy: Energija. Bd. 72. H. 3. International Council on Large Electric Systems 2024 S. 22 - 28

Dlugaj, Anna M.; Arrabiyeh, Peter A.; Eckrich, Maximilian et al.
Dual-Curable Epoxy-Amine Thermosets: Influence of Stoichiometry and Ratio between Hardeners on Thermal and Thermomechanical Properties
Applied Polymer Materials. Bd. 6. H. 5. American Chemical Society (ACS) 2024 S. 2902 - 2912

Klar, Matthias; Ruediger, Patrick; Schuermann, Maik et al.
Explainable generative design in manufacturing for reinforcement learning based factory layout planning
Journal of Manufacturing Systems. Bd. 72. Elsevier BV 2024 S. 74 - 92

Bergmann, Benedikt; Schlimbach, Jens
Friction measurement on towpregs for the filament winding
European Journal of Materials. Bd. 4. H. 1. Informa UK Limited 2024 S. 1 - 18

Yagdjian, Harutyun; Gurka, Martin
Impact of the thermal afterglow effect on infrared thermography data evaluation methods
Infrared Physics & Technology. Bd. 139. Elsevier B.V. 2024 105349

Arrabiyeh, Peter A.; Bobe, Moritz; Duhovic, Miro et al.
Implementing low budget machine vision to improve fiber alignment in wet fiber placement
Journal of Reinforced Plastics and Composites. SAGE 2024

Baumann, Andreas; Duhovic, Miro; Hausmann, Joachim
In Situ Microscopy of Fatigue-Loaded Embedded Transverse Layers of Cross-Ply Laminates: The Role of an Inhomogeneous Fiber Distribution
Journal of Composites Science. Bd. 8. H. 9. MDPI AG 2024 S. 366

Novitska, Maryna; Cassola, Stefano; Schmidt, Tim et al.
Microscale domain permeability prediction of fiber reinforcement structures based on the lattice Boltzmann method and machine learning
Journal of Porous Media. Begell House 2024

Yagdjian, Harutyun; Lecompagnon, Julien; Hirsch, Philipp et al.
Optimization of thermal shock response spectrum as infrared thermography post-processing methodology using Latin hypercube sampling and analytical thermal N-layer model
Infrared Physics & Technology. Bd. 143. Elsevier 2024 105582

Gapeeva, Anna; Jungbluth, Julia; Zeller‐Plumhoff, Berit et al.
Pull‐Out Testing of Electrochemically Etched NiTi Shape Memory Alloy Wires in Shape Memory Alloy Hybrid Composites
Advanced Engineering Materials. Bd. 26. H. 9. Wiley 2024 S. 1 - 11

Klingler, Andreas; Wetzel, Bernd; Krüger, Jan-Kristian
Temperature-Controlled Molecular Bonding Hysteresis: Interphase Dynamics of a Nanoparticle-Modified Polymer Network
The Journal of Physical Chemistry Letters. Bd. 15. H. 13. American Chemical Society (ACS) 2024 S. 3576 - 3580

Langgemach, Wiebke; Baumann, Andreas; Ehrhardt, Manuela et al.
The strength of uncoated and coated ultra-thin flexible glass under cyclic load
Materials Science. Bd. 11. H. 2. American Institute of Mathematical Sciences (AIMS) 2024 S. 343 - 368

Klingler, Andreas; Wetzel, Bernd; Krüger, Jan-Kristian
The thermo-optical coefficient as an alternative probe for the structural arrest of polymeric glass formers
Polymer. Bd. 298. Elsevier B.V. 2024 126868

Klingler, Andreas; Gilberg, Maurice; Reisinger, David et al.
Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis
Polymer Testing. Bd. 131. Elsevier 2024 108340

Klingler, Andreas; Reisinger, David; Schlögl, Sandra et al.
Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)Stability
Macromolecules. Bd. 0. American Chemical Society (ACS) 2024 S. 1 - 8

Hussong, Marco; Varshneya, Saurabh; Rüdiger-Flore, Patrick et al.
A process planning system using deep artificial neural networks for the prediction of operation sequences
Procedia CIRP. Bd. 120. Elsevier BV 2023 S. 135 - 140

Rehra, Jan
Beitrag zur Beschreibung des mechanischen Materialverhaltens von Metall-Faser-Hybrid-Verbund-Werkstoffen am Beispiel von stahl- und kohlenstofffaserverstärktem Epoxidharz
Kaiserslautern: Leibniz-Institut für Verbundwrkstoffe GmbH (IVW) 2023 169 S. (IVW-Schriftenreihe, Bd. 155)

Syerko, E.; Schmidt, T.; May, D. et al.
Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions
Composites Part A: Applied Science and Manufacturing. Bd. 167. Elsevier B.V. 2023 107397

Ruediger-Flore, Patrick; Glatt, Moritz; Hussong, Marco et al.
CAD-based data augmentation and transfer learning empowers part classification in manufacturing
The International Journal of Advanced Manufacturing Technology. Bd. 125. H. 11-12. Springer Science and Business Media LLC 2023 S. 5605 - 5618

Salmins, Maximilian; Gortner, Florian; Mitschang, Peter
Challenges in Manufacturing of Hemp Fiber-Reinforced Organo Sheets with a Recycled PLA Matrix
Polymers. Bd. 15. H. 22. MDPI 2023 4357

Lee, J.; Duhovic, M.; Allen, T. et al.
Computational modelling and analysis of transverse liquid composite moulding processes
Composites Part A: Applied Science and Manufacturing. Bd. 167. Elsevier B.V. 2023 107433

Gebhard, Andreas
Creation of an information management system for tribology laboratories and its application to transfer film luminance analysis
Kaiserslautern: Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) 2023 153 S. (IVW Schriftenreihe, Bd. 154)

Schug, B.; Keun, C.; Gortner, F. et al.
Development of Translucent and Flame Retardant Epoxy-SMC for Aircraft Cabin Applications
SAMPE 2023. Seattle: NA SAMPE 2023

Seefeldt, Andressa; Dippold, Marcel; Gensel, Julia et al.
Direct printing of high-performance thermoplastic connection and stiffening elements by fused filament fabrication
A Holistic and Symbiotic Approach to Sustainable Development. USA: AIP 2023

Pérez-Martín, Helena; Buchalik-Bopp, Stefan; Guettler, Barbara E. et al.
Effect of crystallinity and morphology on the mechanical properties of CF/PEKK composites manufactured under compression moulding and automated tape placement
Materials Today Communications. Bd. 36. Elsevier 2023 106442

Andriß, Christian; Kenf, Andreas; Schmeer, Sebastian
Experimental characterization and phenomenological modeling of nonlinear viscoelasticity, plasticity and damage of continuous carbon fiber-reinforced thermoplastics
Composites Part B: Engineering. Bd. 259. Elsevier B.V. 2023 110734

Hausmann, Joachim; Schmidt, Stefan; Esha, Leibniz-Institut
Improved Mean Value‐Amplitude Method for Determination of Orientation‐Dependent Modulus of Short Fiber‐Reinforced Thermoplastics
Advanced Engineering Materials. Bd. 2023. Wiley 2023 S. 1 - 5

Ferreres, Guillem; Pérez-Rafael, Sílvia; Morena, Angela G. et al.
Influence of Enzymatically Hydrophobized Hemp Protein on Morphology and Mechanical Properties of Bio-Based Polyurethane and Epoxy Foams
Polymers. Bd. 15. H. 17. MDPI 2023 3608

Jungbluth, Julia; Bruns, Stefan; Schmidt, Catarina et al.
Interface failure analysis of embedded NiTi SMA wires using in situ high-resolution X-ray synchrotron tomography
Materials Characterization. Bd. 205. Elsevier B.V. 2023 113345

Salmins, Maximilian; Mitschang, Peter
Investigation of an optimized hot press process design for manufacturing structural polyethersulfone foams
Advanced Manufacturing: Polymer & Composites Science. Bd. 9. H. 1. Informa UK Limited 2023 S. 1 - 25

Esha, Esha; Hausmann, Joachim
Material Characterization Required for Designing Satellites from Fiber-Reinforced Polymers
Journal of Composites Science. Bd. 7. H. 12. MDPI 2023 S. 515

Ruediger-Flore, Patrick; Klar, Matthias; Hussong, Marco et al.
Neural Radiance Fields in der Fabrikplanung
wt Werkstattstechnik. Bd. 113. H. 6. VDI Fachmedien GmbH and Co. KG 2023 S. 219 - 223

Detzel, Martin; Mitschang, Peter; Breuer, Ulf
New Approach for Processing Recycled Carbon Staple Fiber Yarns into Unidirectionally Reinforced Recycled Carbon Staple Fiber Tape
Polymers. Bd. 15. H. 23. MDPI 2023 S. 4575

Vyshnevsky, Dmitry G.; Ovdenko, Valeriia N.; Pavlov, Valeriy A. et al.
New substituted pentazadienes as initiators of free-radical polymerization: Synthesis, photochemical properties and perspectives for holographic media
Journal of Macromolecular Science, Part A. Bd. 60. H. 10. Informa UK Limited 2023 S. 717 - 729

Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
Placement defects in thermoset‐impregnated rovings deposited along curved paths
Polymer Composites. Bd. 2023. Wiley 2023 S. 1 - 12

Schommer, D.; Duhovic, M.; Hoffmann, T. et al.
Polarization imaging for surface fiber orientation measurements of carbon fiber sheet molding compounds
Composites Communications. Bd. 37. Elsevier B.V. 2023 101456

Lin, Yusong; He, Ren; Xu, Yongkun et al.
Significance of nickel particles on reducing friction and wear of polyimide subjected to harsh boundary lubrication conditions
Tribology International. Bd. 178. H. A. Elsevier B.V. 2023 108063

Janzen, Jan Ph.; May, David
Solid epoxy prepregs with patterned resin distribution: Influence of pattern and process parameters on part quality in vacuum‐bag‐only processing
Polymer Composites. Bd. 2023. Wiley 2023 S. 1 - 15

Weber, Julian; Schlimbach, Jens
Stamp forming of partially consolidated CF/PEEK tape preforms produced in a high-speed automated tape laying process
Polymers and Polymer Composites. Bd. 31. Sage 2023 96739112311680

Krause, K.; Hartbauer, M.; Neumeyer, T. et al.
Structure-property-relationships for Lightweight Parts Produced via  Co-injection Molding and Foam Injection Molding
Zeitschrift Kunststofftechnik. Bd. 1. Carl Hanser 2023 S. 27 - 51

Ovdenko, Valeriia; Vyshnevsky, Dmitry; Davidenko, Nikolay et al.
Synthesis, characterization, spectral properties and evaluation of the photophysical behavior of novel Congo Red based polymers
Optical Materials. Bd. 135. Elsevier B.V. 2023 113268

Mukherjee, Avik; Ruediger-Flore, Patrick; Billimoria, Anosh et al.
Training a Machine Learning Model for representing Manufacturing Systems towards optimizing Resilience
Procedia CIRP. Bd. 120. Elsevier BV 2023 S. 768 - 773

Romanenko, V.; Duhovic, M.; Schommer, D. et al.
Advanced process simulation of compression molded carbon fiber sheet molding compound (C-SMC) parts in automotive series applications
Composites Part A: Applied Science and Manufacturing. Bd. 157. Elsevier B.V. 2022 106924

Kaiser, Max; Gurka, Martin; Kunzler, Manuel
Airfoil trailing edge morphing based on modified SMAHC concept. Design, implementation, and experimental studies
Active and Passive Smart Structures and Integrated Systems XVI. Long Beach, California: SPIE. Digital Library 2022 120430Z

Salmins, Maximilian; Mitschang, Peter
Bending properties of structural foams manufactured in a hot press process
Advanced Manufacturing: Polymer & Composites Science. Bd. published online. Informa UK Limited 2022 S. 1 - 17

Donhauser, Tobias; Kenf, Andreas; Schmeer, Sebastian et al.
Calculation of highly stressed components made of carbonfiber-reinforced polyamide-6
Composite Structures. Bd. 280. Elsevier B.V. 2022 S. 114830

Andriß, Christian; Kenf, Andreas; Donhauser, Tobias et al.
Characterization and modeling of continuous carbon fiber-reinforced polycarbonate under multiaxial loads
Composites Part B: Engineering. Bd. 235. Elsevier B.V. 2022 109740

Baumann, Andreas; May, David; Hausmann, Joachim
Characterization of metallic bushings in RTM-made composites by in-situ leak detection under mechanical loading
Composites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 S. 100226

Rehra, Jan; Andriß, Christian; Schmeer, Sebastian et al.
Describing the Material Behavior of Steel and Carbon Fiber Reinforced Composites Using a Combined Damage-Plasticity Approach
Journal of Composites Science: Multifunctional Composite Structures. Bd. 6. H. 8. MDPI AG 2022 S. 235

Kunzler, Manuel; Kaiser, Max; Fischer, Simon et al.
Design, construction and simulation of a shape memory alloy based morphing airfoil demonstrator based on the agonist-antagonist principle
Society of Photo-Optical Instrumentation Engineers (Hrsg). Active and Passive Smart Structures and Integrated Systems XVI. Long Beach, California, USA: SPIE. Digitl Library 2022 1204310

Rief, Thomas; Motsch-Eichmann, Nicole; May, David et al.
Development of a New Method for Manufacturing Hollow Fibre-Reinforced Plastic Structures for Aeronautical Applications Using Structural CFRP Cores
Plastics, Rubber and Composites. Bd. 51. H. 8. Informa UK Limited 2022 S. 407 - 417

Esha, Esha; Hausmann, Joachim
Development of an Analytical Model to Predict Stress–Strain Curves of Short Fiber-Reinforced Polymers with Six Independent Parameters
Journal of Composites Science. Bd. 6. H. 5. MDPI AG 2022 140

Semar, Jan E.; May, David; Mitschang, Peter
Evaluation of different bonding strategies for glass fibre-reinforced epoxy resin with embedded elastomer layers
Plastics, Rubber and Composites: Macromolecular Engineering. Bd. 51. H. 8. Informa UK Limited 2022 S. 454 - 461

Zhu, Ping; Brückner, Alexander; Neumeyer, Thomas et al.
Fatigue Characteristics of Poly(ether-b-amide) Elastomers during Cyclic Dynamic Tests and the Underlying Microstructural Evolution
Industrial &amp; Engineering Chemistry Research. Bd. 61. H. 40. American Chemical Society (ACS) 2022 S. 14760 - 14771

Gebhard, Andreas; Jim, Bai Cheng
Formation, stability and degradation of transfer films formed by polyphenylene sulfide (PPS) and its composites in dry sliding against steel
Wear. Bd. 500-501. Elsevier BV 2022 204343

Bauer, Philipp; Motsch-Eichmann, Nicole; Schmeer, Sebastian et al.
Hybrid Thermoset-Thermoplastic Structures: An in-depth study on plasma pretreated continuous fiber-reinforced epoxy specimens
Composites Part C: Open Access. Bd. 8. Elsevier BV 2022 100281

Popow, Vitalij; Vogtmann, Julia; Gurka, Martin
In-situ characterization of impact damage in carbon fibre reinforced polymers using infrared thermography
Infrared Physics & Technology. Bd. 122. Elsevier B.V. 2022 104074

Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Influence of Fungal Decay on Mechanical Properties of Bio-based Sheet Molding Compounds (SMC)
Polymers and Polymer Composites. Bd. 30. SAGE 2022 S. 1 - 11

Becker, Stephan; Michel, Marc; Mitschang, Peter et al.
Influence of polymer matrix on the induction heating behavior of CFRPC laminates
Composites Part B: Engineering. Bd. 231. Elsevier B.V. 2022 S. 109561

Krummenacker, Janna
Investigations on the high cycle fatigue strength of short glass fiber reinforced polyamide 66
Kaiserslautern. 2022 127 S.

Weidmann, Stefan; Volk, Petra; Mitschang, Peter et al.
Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer composites
Composites Part A: Applied Science and Manufacturing. Bd. 154. Elsevier B.V. 2022 S. 106791

Klingler, Andreas; He, Qinghao; Wetzel, Bernd et al.
Low velocity impact resistance of thin and toughened carbon fibre reinforced epoxy
Composites Science and Technology. Bd. 2022. Elsevier B.V. 2022 109362

Cassola, Stefano; Duhovic, Miro; Schmidt, Tim et al.
Machine learning for polymer composites process simulation: A review
Composites Part B: Engineering. Bd. 246. Elsevier B.V. 2022 110208

Hausmann, Joachim; ., Esha; Schmidt, Stefan et al.
Mean Value-Amplitude Method for the Determination of Anisotropic Mechanical Properties of Short Fiber Reinforced Thermoplastics
Journal of Composites Science. Bd. 6. H. 6. MDPI AG 2022 179

Grzesiak, Szymon; Pahn, Matthias; Klingler, Andreas et al.
Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete Structures
Polymers. Bd. 14. H. 4. MDPI AG 2022 790

Khatri, Bilal; Rehra, Jan; Schmeer, Sebastian et al.
Metal/Carbon-Fiber Hybrid Composites—Damage Evolution and Monitoring of Isothermal Fatigue at Low and Elevated Temperatures
Journal of Composites Science. Bd. 6. H. 3. MDPI AG 2022 67

Klingler, A.; Gilberg, M.; Krüger, J.-K. et al.
On volume changes during homopolymerization of polymer networks accessed via “Temperature modulated optical refractometry”
Thermochimica Acta. Bd. 711. Elsevier B.V. 2022 179185

Ruediger, Patrick; Claus, Felix; Leonhardt, Viktor et al.
PREVIS - A Combined Machine Learning and Visual Interpolation Approach for Interactive Reverse Engineering in Assembly Quality Control
Procedia CIRP. Bd. 112. Elsevier BV 2022 S. 483 - 488

Becker, S.; Mitschang, P.
Process Improvement of Continuous Induction Welding of Carbon Fiber-Reinforced Polymer Composites
Journal of Materials Engineering and Performance. Bd. 2022. Springer Science and Business Media LLC 2022 S. 1

May, David
Prozessentwicklung für Faser-Kunststoff-Verbunde: Studien zu Verarbeitungseigenschaften von Halbzeugen als Basis einer ganzheitlichen Forschungsmethodik
Kaiserslautern: Leibniz-Institut für Verbundwerkstoffe GmbH 2022 375 S. (IVW-Schriftenreihe (148))

Willenbacher, Bjoern; May, David; Mitschang, Peter
Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressure
Advanced Manufacturing: Polymer & Composites Science. Bd. 2022. Informa UK Limited 2022 S. 1 - 5

Klar, Matthias; Hussong, Marco; Ruediger-Flore, Patrick et al.
Scalability investigation of Double Deep Q Learning for factory layout planning
Procedia CIRP. Bd. 107. Elsevier BV 2022 S. 161 - 166

Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Simultaneous access to different types of volume changes and the degree of cure during isothermal polymerization of polymer networks
Express Polymer Letters. Bd. 16. H. 11. Budapest: University of Technology and Economics, Faculty of Mechanical Engineering, Department of Polymer Engineering; Scientific Society of Mechanical Engineering 2022 S. 1193 - 1207

Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
Structural topology optimization and path planning for composites manufactured by fiber placement technologies
Composite Structures. Bd. 289. Elsevier B.V. 2022 115488

Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Temperature-rate induced polymerization and phase separation of block copolymer toughened polymer composites
Composites Science and Technology. Bd. in Press. Elsevier B.V. 2022 109329

Lee, Jeeeun; Duhovic, Miro; Allen, Tom et al.
Transverse liquid composite moulding processes for advanced composites material manufacturing
Plastics, Rubber and Composites. Bd. 51. H. 8. Informa UK Limited 2022 S. 373 - 382

Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Use of bio-based and renewable materials for sheet molding compounds (SMC) – Mechanical properties and susceptibility to fungal decay
Composites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 100242

Vogtmann, Julia; Klingler, Andreas; Rief, Thomas et al.
3D X-ray Microscopy as a Tool for in Depth Analysis of the Interfacial Interaction between a Single Carbon Fiber and an Epoxy Matrix after Mechanical Loading
Journal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 121

Schmidt, Tim; May, David; Duhovic, Miro et al.
A combined experimental–numerical approach for permeability characterization of engineering textiles
Polymer Composites. Bd. 42. H. 7. Wiley 2021 S. 3363 - 3379

Arrabiyeh, Peter A.; May, David; Eckrich, Maximilian et al.
An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resin
Polymer Composites. Bd. 42. H. 11. Wiley 2021 S. 5630 - 5655

Gryshchuk, Liudmyla; Grishchuk, Sergiy; Kote, E. et al.
Bio-based soft polyurethane foams filled with coffee waste
International Research and Practice Conference "Nanotechnology and Nanomaterials" (NANO 2021): Abstract book. Lviv: LLC 2021 0

Gortner, Florian; Mitschang, Peter; Ooms, Peter et al.
Bio-basierte und nachwachsende Rohstoffe eröffnen neue Anwendungsmöglichkeiten für gewichtsoptimierte duroplastische Werkstoffe im KFZ- und NFZ-Bereich
Berns, Karsten; Dressler, Klaus; Kalmar, Ralf; Stephan, Nicole; Teutsch, Reusch; Thul, Martin (Hrsg). Commercial Vehicle Technology 2020/2021: Proceedings. Wiesbaden: Springer Vieweg 2021 S. 264 - 278

Coccia, Francesca; Gryshchuk, Liudmyla; Moimare, Pierluigi et al.
Chemically Functionalized Cellulose Nanocrystals as Reactive Filler in Bio-Based Polyurethane Foams
Polymers. Bd. 13. H. 15. MDPI AG 2021 2556

Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Composite technology: Prepregs and monolithic part fabrication technologies
2. Aufl. Munich: Hanser 2021 245 S.

May, David; Mitschang, Peter
Concept for Darcy-based viscosity measurement for fast-curing resin systems
Composites Communications. Bd. 27. Elsevier B.V. 2021 S. 100881

Rosnitschek, Tobias; Seefeldt, Andressa; Alber-Laukant, Bettina et al.
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components
Materials. Bd. 14. H. 18. MDPI 2021 5173

Hussong, Marco; Glatt, Moritz; Rüdiger-Flore, Patrick et al.
Deep Learning zur Unterstützung der Arbeitsplanung
Zeitschrift für wirtschaftlichen Fabrikbetrieb. Bd. 116. H. 10. Walter de Gruyter GmbH 2021 S. 648 - 651

Krummenacker, Janna; Hausmann, Joachim
Determination of Fatigue Damage Initiation in Short Fiber-Reinforced Thermoplastic through Acoustic Emission Analysis
Journal of Composites Science. Bd. 5. H. 8. MDPI AG 2021 221

Akpan, Emmanuel Isaac; Wetzel, Bernd; Friedrich, Klaus
Eco-friendly and sustainable processing of wood-based materials
Green Chemistry. Bd. 23. H. 6. Royal Society of Chemistry (RSC) 2021 S. 2198 - 2232

Gapeeva, Anna; Vogtmann, Julia; Zeller-Plumhoff, Berit et al.
Electrochemical Surface Structuring for Strong SMA Wire–Polymer Interface Adhesion
ACS Applied Materials & Interfaces. Bd. 13. H. 18. American Chemical Society (ACS) 2021 S. 21924 - 21935

Almazán-Lázaro, Juan-Antonio; López-Alba, Elías; Schmeer, Sebastian et al.
Enhanced Low-Velocity Impact Properties for Resin Film Infusion-Manufactured Composites by Flow-Control Approach
Polymers. Bd. 13. H. 19. MDPI AG 2021 3431

Adler, Sonja E.; Güttler, Barbara E.; Bendler, Lubov et al.
Evaluation of recycled carbon fibre/epoxy composites: Thermal degradation behaviour of pyrolysed and virgin carbon fibres using thermogravimetric analysis
Advanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 82 - 92

Baumann, Andreas; Hausmann, Joachim
Experimental Investigation of Instabilities on Different Scales in Compressive Fatigue Testing of Composites
Journal of Composites Science. Bd. 5. H. 4. MDPI AG 2021 S. 114

Motsch-Eichmann, Nicole; Rieger, Florian; Rief, Thomas et al.
Experimental investigation of modified co-curing process for carbon fiber/epoxy-laminates
Journal of Micromechanics and Molecular Physics. Bd. 06. H. 03. World Scientific Pub Co Pte Ltd 2021 S. 1 - 12

Hausmann, Joachim; Krummenacker, Janna; Klingler, Andreas et al.
Improvement of fatigue strength of carbon fiber reinforced polymers by matrix modifications for ultrafast rotating flywheels
Viehweger, C. u. a. (Hrsg). Frontiers of Science and Technology. Berlin: De Gruyter 2021 S. 279 - 289

Piott, Florian; Krämer, Andreas; Lück, André et al.
Increasing the performance of continuous compression moulding by local pressure adaption
Advanced Manufacturing: Polymer & Composites Science. Bd. 7. H. 1. Informa UK Limited 2021 S. 1 - 14

Weinbrenner, Marius; Weber, Regino; Neumeyer, Thomas et al.
Influence of foam density on burning behavior of polymer bead foams
Journal of Applied Polymer Science. Bd. 139. H. 4. Wiley 2021 51558

May, David
Integrated Product Development with Fiber-Reinforced Polymers
Cham: Springer International Publishing 2021 (Engineering Materials)

Ruediger-Flore, Patrick; Glatt, Moritz; Aurich, Jan C.
Maschinelles Lernen bei hohem Variantenreichtum und kleinen Serien
Zeitschrift für wirtschaftlichen Fabrikbetrieb. Bd. 116. H. 7-8. Walter de Gruyter GmbH 2021 S. 538 - 543

Klingler, Andreas
Morphology and fracture of block copolymer and core-shell rubber particle modified epoxies and their carbon fibre reinforced composites
Kaiserslautern: Leibniz-Institut für Verbundstoffe 2021 161 S.

May, D.; Goergen, C.; Friedrich, K.
Multifunctionality of polymer composites based on recycled carbon fibers: A review
Advanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 70 - 81

Friedrich, Klaus; Akpan, E. I.; Wetzel, Bernd
On the Tribological Properties of Extremely Different Wood Materials
European Journal of Wood and Wood Products. Bd. 79. H. 4. Springer 2021 S. 977 - 988

Friedrich, K.; Akpan, E. I.; Wetzel, B.
On the tribological properties of extremely different wood materials
European Journal of Wood and Wood Products. Bd. 79. H. 4. Springer Science and Business Media LLC 2021 S. 977 - 988

Yong, A.X.H.; Aktas, A.; May, D. et al.
Out-of-plane permeability measurement for reinforcement textiles : A benchmark exercise
Composites Part A : Applied Science and Manufacturing. Bd. 148. Elsevier Ltd. 2021 S. 106480

Gebhard, Andreas; Jim, Bai Cheng
Photo-optical luminance analysis of transfer films: Measurement principle, data analysis and result plotting
Tribology International. Bd. 153. Elsevier Ltd. 2021 S. 106626

Akpan, Emmanuel; Friedrich, Klaus; Jacob, Stefan et al.
Reactive Layer Assembly Sustains an Interlocked Structure in Green Processed and Scalable High-Performance Layered Wood
ACS Sustainable Chemistry & Engineering. Bd. 9. H. 47. American Chemical Society (ACS) 2021 15744

Meghanathan, Radha Nila; Ruediger-Flore, Patrick; Hekele, Felix et al.
Spatial Sound in a 3D Virtual Environment: All Bark and No Bite?
Big Data and Cognitive Computing. Bd. 5. H. 4. MDPI AG 2021 S. 79

Mehl, Konstantin; Schmeer, Sebastian; Motsch-Eichmann, Nicole et al.
Structural Optimization of Locally Continuous Fiber-Reinforcements for Short Fiber-Reinforced Plastics
Journal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 S. 118

Mrzljak, Selim; Schmidt, Stefan; Kohl, Andreas et al.
Testing Procedure for Fatigue Characterization of Steel-CFRP Hybrid Laminate Considering Material Dependent Self-Heating
Materials. Bd. 14. H. 12. MDPI AG 2021 S. 3394

Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart et al.
A comparative analysis of ceramic and cemented carbide end mills
Production Engineering. Bd. 14. H. 3. Springer LLC 2020 S. 355 - 364

Setti, Dinesh; Arrabiyeh, Peter A.; Kirsch, Benjamin et al.
Analytical and experimental investigations on the mechanisms of surface generation in micro grinding
International Journal of Machine Tools and Manufacture. Bd. 149. Elsevier B.V. 2020 103489

Donhauser, Tobias
Beitrag zur Auslegung hochbeanspruchter Bauteile aus Faser-Thermoplast-Verbunden
Kaiserslautern: Institut für Verbundwerkstoffe GmbH 2020 131 S.

Ruediger, Patrick; Claus, Felix; Hamann, Bernd et al.
Combining Visual Analytics and Machine Learning for Reverse Engineering in Assembly Quality Control
Journal of Imaging Science and Technology. Bd. 64. H. 6. Society for Imaging Science & Technology 2020 S. 060405-1 - 060405-13 jist0956

Baumann, Andreas; Hausmann, Joachim
Compression Fatigue Testing Setups for Composites—A Review
Advanced Engineering Materials. Bd. 23. H. 2. Wiley 2020 S. 2000646

Walter, Rolf; Selzer, Ralf; Gurka, Martin et al.
Effect of filament quality, structure, and processing parameters on the properties of fused filament fabricated short fiber-reinforced thermoplastics
Structure and Properties of Additive Manufactured Polymer Components. Amsterdam: Elsevier 2020 S. 253 - 302

Finck, David; Seidel, Christian; Ostermeier, Anika et al.
Experimental Investigation on the In-Plane Creep Behavior of a Carbon-Fiber Sheet Molding Compound at Elevated Temperature at Different Stress States
Materials. Bd. 13. H. 11. MDPI AG 2020 S. 2545

Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Faserverbundwerkstoffe: Prepregs und ihre Verarbeitung
2. Aufl. München: Hanser 2020 288 S.

Popow, Vitalij; Gurka, Martin
Full factorial analysis of the accuracy of automated quantification of hidden defects in an anisotropic carbon fibre reinforced composite shell using pulse phase thermography
NDT & E International. Bd. 116. Elsevier Ltd. 2020 S. 102359

Bajpai, Ankur; Wetzel, Bernd; Friedrich, Klaus
High strength epoxy system modified with soft block copolymer and stiff core-shell rubber nanoparticles: Morphology, mechanical properties, and fracture mechanisms
Express Polymer Letters. Bd. 14. H. 4. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2020 S. 384 - 399

Becker, Yves Nicolas; Motsch, Nicole; Hausmann, Joachim et al.
Hybrid composite pedicle screw - finite element modelling with parametric optimization
Informatics in Medicine Unlocked. Bd. 18. Elsevier B.V. 2020 S. 100290 100290

Bauer, Philipp; Becker, Yves N.; Motsch-Eichmann, Nicole et al.
Hybrid thermoset-thermoplastic structures: An experimental investigation on the interface strength of continuous fiber-reinforced epoxy and short-fiber reinforced polyamide 6
Composites Part C: Open Access. Bd. 3. Elsevier B.V. 2020 S. 100060

Kopietz, Mark; Friedrich, Klaus; Wetzel, Bernd
In situ functionalisation of organomineral hybrid resins for tough basalt fibre reinforced plastics
Plastics, Rubber and Composites. Bd. 50. H. 3. Informa UK Limited 2020 S. 105 - 115

Santos, Alberto L.; Nakazato, Roberto Z.; Schmeer, Sebastian et al.
Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminate
Composites Part B: Engineering. Bd. 184. Elsevier Ltd. 2020 S. 107718

Kelkel, Benjamin; Popow, Vitalij; Gurka, Martin
Inline quantification and localization of transverse matrix cracking in cross-ply CFRP during quasi-static tensile testing by a joint event-based evaluation of acoustic emission and passive IR thermography
Composites Science and Technology. Bd. 190. Elsevier B.V. 2020 S. 108013

Goergen, Christian; May, David; Mitschang, Peter
Integration of rCF in resin transfer pressing process
Journal of Reinforced Plastics and Composites. Bd. 39. H. 9-10. SAGE Publications 2020 S. 361 - 372

May, David
Integrierte Produktentwicklung mit Faser-Kunststoff-Verbunden
Berlin: Springer Vieweg 2020 262 S.

May, David
Integrierte Produktentwicklung mit Faser-Kunststoff-Verbunden
Berlin: Springer Vieweg 2020 262 S.

Baumann, Andreas; Backe, Sebastian; Hausmann, Joachim
Investigation of the fatigue behavior of thermoplastic composites by load increase tests
Journal of Composite Materials. Bd. 55. H. 4. SAGE Publications 2020 S. 541 - 550

Ornelas, Mariana; Aguilar, Helena; Conceição, David et al.
Use of biogenic silica nanoparticles derived from biomass in polymeric formulations and their applications
AEMAC. Bd. 4. H. 3. 2020 S. 22 - 28

Mischo, Florian; Goergen, Christian; Schmeer, Sebastian et al.
Use of recycled carbon staple fibers in an advanced thermoforming process and analysis of its crash performance
Advanced Manufacturing: Polymer & Composites Science. Bd. 6. H. 1. Informa UK Limited 2020 S. 48 - 56

Schmidt, Tim; Schimmer, Florian; Widera, Aaron et al.
A Novel Simulative-Experimental Approach to Determine the Permeability of Technical Textiles
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 487 - 492

Weber, Tobias A; Englhard, Markus; Arent, Jan-Christoph et al.
An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates
Journal of Composite Materials. Bd. 53. H. 26-27. SAGE Publications 2019 S. 3757 - 3773

Gebhard, Andreas
ATLAS – an automated and highly integrated information management system for tribology laboratories
Göttingen. 2019

Becker, Stephan; Mitschang, Peter
Beeinflussung der Induktionserwärmung von textilverstärktem CFK durch Laminatparameter
Zeitschrift Kunststofftechnik. Bd. 1. Carl Hanser Verlag 2019 S. 210 - 244

Gortner, Florian; Mitschang, Peter
Bio-Based and Renewable Filler Materials for Thermoset Compounds
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 650 - 657

Gortner, Florian
Bio-basierte und nachwachsende Füllstoffe für dichtereduzierte Sheet Molding Compounds
Kaiserslautern: Institut für Verbundwrkstoffe GmbH (IVW) 2019 150 S.

Domm, Matthias; Schlimbach, Jens; Mitschang, Peter
Characterization method for continuous fiber reinforced thermoplastic strands
Journal of Thermoplastic Composite Materials. Bd. 34. H. 3. SAGE Publications 2019 S. 328 - 352

Nissle, Sebastian; Gurka, Martin
Characterization of active hybrid structures made of fiber reinforced composites and shape memory alloys—part A: characterization of the load transfer
Smart Materials and Structures. Bd. 28. H. 4. IOP Publishing 2019 S. 1 - 10 045002

Weber, Julian; Schlimbach, Jens
Co-consolidation of CF/PEEK tape-preforms and CF/PEEK organo sheets to manufacture reinforcements in stamp-forming process
Advanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 4. Informa UK Limited 2019 S. 172 - 183

Schimmer, Florian; Ladewig, Sven; Motsch, Nicole et al.
Comparison of Low-Velocity Impact Damage Behavior of Unidirectional Carbon Fiber-Reinforced Thermoset and Thermoplastic Composites
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 9 - 14

Finck, David; Seidel, Christian; Hausmann, Joachim et al.
Creep-Induced Screw Preload Loss of Carbon-Fiber Sheet Molding Compound at Elevated Temperature
Materials. Bd. 12. H. 21. MDPI AG 2019 3598

Akpan, E.I.; Shen, X.; Wetzel, Bernd et al.
Design and Synthesis of Polymer Nanocomposites
Pielichowski, Krzysztof ; Majka, Tomasz M. (Hrsg). Polymer composites with functionalized nanoparticles : synthesis, properties, and applications. Amsterdam: Elsevier 2019 S. 47 - 83

Kühn, Florian; Rehra, Jan; May, David et al.
Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional composites
Advanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 1. Informa UK Limited 2019 S. 37 - 49

Gortner, Florian; Mitschang, Peter; Neu, Wiebke et al.
Efficient Process Chain for Processing Natural Fiber Reinforced Thermoplastics
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 658 - 663

Akpan, Emmanuel I.; Gbenebor, Oluwashina Ph.; Igogori, Ese A. et al.
Electrospun porous bio-fibre mat based on polylactide/natural fibre particles
Arab Journal of Basic and Applied Sciences. Bd. 26. H. 1. Informa UK Limited 2019 S. 225 - 235

Stelzl, Daniel; Pfleiderer, Anna; Ortmann, Peter et al.
Embedded Fiber Bragg Gratings for the Process and Structural Health Monitoring of Composite Boosters for Space Applications
Structural Health Monitoring 2019. Palo Alto: DEStech Publications, Inc. 2019

Schneider, Dominik; Schumacher, Axel; Donhauser, Tobias et al.
Flexible Graph Syntax for the Topology Optimization of Crashworthiness Profile Structures Made from Thermoplastic Composites
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 493 - 499

Kopietz, Mark; Wetzel, Bernd; Friedrich, Klaus
Flexural and fracture mechanical properties of in situ particulate reinforced organomineral hybrid resins modified by organofunctional silanes
Composites Science and Technology. Bd. 174. Elsevier BV 2019 S. 169 - 175

Gebhard, Andreas; Jim, Bai-Cheng; Wetzel, Bernd
Gleitkontakt bei Kunststoff-Metall-Verbindungen Bildung, Wirkung und Stabilität von Transferfilmen
Bad Neuenahr-Ahrweiler. 2019

May, David; Aktas, A.; Advani, S.G. et al.
In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise
Composites Part A: Applied Science and Manufacturing. Bd. 121. Elsevier BV 2019 S. 100 - 114

Weidmann, Stefan; Mitschang, Peter
Influence of welding temperature and weathering on inductive welded hybrid joints made of steel and TP-FRPC
Hausmann, Joachim M. (Hrsg). 22nd Symposium on Composites. Zurich: Trans Tech Publications 2019 S. 127 - 225 (Key Engineering Materials Ser. ; Volume 809)

Krooß, Tim; Gurka, Martin; Breuer, Ulf
Investigation of morphologies and tensile impact toughness of immiscible polyphenylene sulfide/polyether sulfone films and carbon fiber composites by quantitative optical methods
Polymer Composites. Bd. 40. H. 9. Wiley 2019 S. 3725 - 3736

Rieger, Florian; Rief, Thomas; Motsch, Nicole et al.
Manufacturing CFRP-Parts Using a Modified Co-Curing Method – Fundamental Experimental Analysis
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 372 - 377

Schommer, Dominic; Duhovic, Miro; Romanenko, Vitali et al.
Material Characterization and Compression Molding Simulation of CF-SMC Materials in a Press Rheometry Test
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 467 - 472

Bajpai, Ankur; Wetzel, Bernd; Klingler, Andreas et al.
Mechanical properties and fracture behavior of high‐performance epoxy nanocomposites modified with block polymer and core–shell rubber particles
Journal of Applied Polymer Science. Bd. 137. H. 11. Wiley 2019 S. 48471

Willenbacher, Björn; May, David; Mitschang, Peter
Metrological determination of inhomogeneous hydrodynamic compaction during unsaturated out-of-plane permeability measurement of technical textiles
Advanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 2. Informa UK Limited 2019 S. 51 - 54

Arrabiyeh, Peter A.; Setti, Dinesh; Basten, Stephan et al.
Micro grinding 16MnCr5 hardened steel using micro pencil grinding tools with diameters ∼50 μm
CIRP Journal of Manufacturing Science and Technology. Bd. 27. Elsevier B.V. 2019 S. 1 - 10

Rimmel, Oliver; May, David
Modeling transverse micro flow in dry fiber placement preforms
Journal of Composite Materials. Bd. 54. H. 13. SAGE Publications 2019 S. 1691 - 1703

Lehmhus, Dirk; von Hehl, Axel; Hausmann, Joachim et al.
New Materials and Processes for Transport Applications: Going Hybrid and Beyond
Advanced Engineering Materials. Bd. 21. H. 6. Wiley 2019 S. 1900056

Goergen, Christian; Klingler, Andreas; Grishchuk, Sergiy et al.
Novel Approach in B-Staging of an Epoxy Resin for Development of rCF Non-Woven Prepregs for RTP Processing
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 521 - 526

Jim, Bai-Cheng; Gebhard, Andreas; Wetzel, Bernd et al.
Novel in-situ method for studying transfer films and tribology performance of additives
Novi. 2019

Gebhard, Andreas; Wetzel, Bernd
On selected aspects of the sliding wear of 3D printed polymers
Frankfurt/Main. 2019

Jim, Bai-Cheng; Gebhard, Andreas; Wetzel, Bernd
On the kinetic and stability of transfer films in polymer/metal slide pairings,
Göttingen. 2019

Arrabiyeh, Peter A.; Dethloff, Maximilian; Müller, Christopher et al.
Optimization of Micropencil Grinding Tools Via Electrical Discharge Machining
Journal of Manufacturing Science and Engineering. Bd. 141. H. 3. ASME International 2019 S. 31005 - 31013

May, David; Willenbacher, Björn; Semar, Jan et al.
Out-of-plane permeability of 3D woven fabrics for composite structures
The Journal of The Textile Institute. Bd. 111. H. 7. Informa UK Limited 2019 S. 1047 - 1053

Willenbacher, Björn; May, David; Mitschang, Peter
Out–of–plane capillary pressure of technical textiles
Composites Part A: Applied Science and Manufacturing. Bd. 124. Elsevier BV 2019 S. 105495

Popow, Vitalij; Gurka, Martin
Passive Thermography for Detection of Damaging Events during Quasi-Static Tensile Testing
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 581 - 586

Popow, Vitalij; Gurka, Martin
Possibilities and limitations of passive and active thermography methods for investigation of composite materials using NDT simulations
Smart Structures and NDE for Energy Systems and Industry 4.0. San Diego: SPIE 2019

Akpan, E. I.; Wetzel, Bernd; Friedrich, K.
Process design for performance improvement in purely ecofriendly composites for structural applications
Journal of Applied Polymer Science. Bd. 137. H. 21. Wiley Periodicals, LLC. 2019 S. 48719

Kelkel, Benjamin; Argus, Philipp; Gurka, Martin
Scalable Monitoring System for the Localization of Damaging Events in Thin-Walled CFRP Structures Based on Acoustic Emission Analysis and Neural Networks
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 401 - 406

Dmitriev, A. I.; Jim, Bai-Cheng; Wetzel, Bernd et al.
Study of the influence of size and shape of silica fillers in polymer composites on the tribolayer formation
Kaunas, Litauen. 2019

Dmitriev, A. I.; Jim, B. C.; Wetzel, B.
Study the influence of size and shape of silica fillers in polymer composites on the tribolayer formation
Proccedings of International Scientific Conference "BALTTRIB 2019". Bd. 1. Vytautas Magnus University 2019 S. 14 - 19

Weidmann, Stefan; Hümbert, Martina; Mitschang, Peter
Suitability of thickness change as process control parameter for induction welding of steel/TP-FRPC joints
Advanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 2. Informa UK Limited 2019 S. 55 - 68

Akpan, Emmanuel I.; Adeosun, Samson O.
Sustainable Lignin for Carbon Fibers: Principles, Techniques, and Applications
Cham: Springer 2019

Habla, F.; Kropka, M.; Muehlbacher, M. et al.
Tailor Made Hybrid Laminates Based on UD-Tapes: A Way to Efficient Thermoplastic Components
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 41 - 46

Gurka, Martin
The physics of multifunctional materials: concepts, materials, applications
Lancaster, PA: DEStech Publications, Inc. 2019 179 S.

Muddassir, Muhammad; Duhovic, Miro; Gurka, Martin
A comprehensive study of metal-coated short carbon fibers, graphite particles, and hybrid fillers for induction heating
Journal of Thermoplastic Composite Materials. Bd. 33. H. 3. SAGE Publications 2018 S. 393 - 412

Akpan, E.I.; Wetzel, Bernd; Friedrich, K.
A fully biobased tribology material based on acrylic resin and short wood fibres
Tribology International. Bd. 120. Elsevier B.V. 2018 S. 381 - 390

Nissle, S.; Kaiser, M.; Hübler, M. et al.
Adaptive vortex generators based on active hybrid composites: from idea to flight test
CEAS Aeronautical Journal. Bd. 9. H. 4. Springer Science and Business Media LLC 2018 S. 661 - 670

Gebhard, Andreas; Jim, Bai-Cheng; Wetzel, Bernd
Advanced testing methods for polymer transfer films in sliding contacts
Düsseldorf. 2018

Helmlinger, Lars; Zhu, Yejun; Gensel, Julia et al.
Application of Amine-Functionalized Cellulose Foam for CO2 Capture and Storage in the Brewing Industry
Journal of Renewable Materials. Bd. 6. H. 3. Tech Science Press 2018 S. 219 - 225

Rehra, Jan; Hannemann, Benedikt; Schmeer, Sebastian et al.
Approach for an Analytical Description of the Failure Evolution of Continuous Steel and Carbon Fiber Hybrid Composites
Advanced Engineering Materials. Bd. 21. H. 6. Wiley 2018 S. 1800565

Bohley, Martin; Reichenbach, Ingo; Kieren-Ehses, Sonja et al.
Coating of Ultra-Small Micro End Mills: Analysis of Performance and Suitability of Eight Different Hard-Coatings
Journal of Manufacturing and Materials Processing. Bd. 2. H. 2. MDPI AG 2018 S. 22

Popow, Vitalij; Budesheim, Lars; Gurka, Martin
Comparison and evaluation of different processing algorithms for the nondestructive testing of fiber-reinforced plastics with pulse thermography
Materials Testing. Bd. 60. H. 6. Carl Hanser Verlag 2018 S. 607 - 613

Goergen, Christian; Schommer, Dominic; Duhovic, Miro et al.
Deep drawing of organic sheets made of hybrid recycled carbon and thermoplastic polyamide 6 staple fiber yarns
Journal of Thermoplastic Composite Materials. Bd. 33. H. 6. SAGE Publications 2018 S. 754 - 778

Rimmel, Oliver; May, David; Goergen, Christian et al.
Development and validation of recycled carbon fiber-based binder tapes for automated tape laying processes
Journal of Composite Materials. Bd. 53. H. 23. SAGE Publications 2018 S. 3257 - 3268

Resch-Fauster, Katharina; Džalto, Jovana; Anusic, Andrea et al.
Effect of the water absorptive capacity of reinforcing fibers on the process ability, morphology, and performance characteristics of composites produced from polyfurfuryl alcohol
Advanced Manufacturing: Polymer & Composites Science. Bd. 4. H. 1. Informa UK Limited 2018 S. 13 - 23

López-Alba, Elías; Schmeer, Sebastian; Díaz, Francisco
Energy Absorption Capacity in Natural Fiber Reinforcement Composites Structures
Materials. Bd. 11. H. 3. MDPI AG 2018 S. 418

Backe, S.; Balle, F.; Hannemann, B. et al.
Fatigue properties of multifunctional metal- and carbon-fibre-reinforced polymers and intrinsic capabilities for damage monitoring
Fatigue & Fracture of Engineering Materials & Structures. Bd. 42. H. 1. Wiley 2018 S. 143 - 151

Kopietz, Mark; Wetzel, Bernd
Impact of Aggressive Media on the Interlaminar Shear Strength of Innovative Glass Fiber Reinforced Polyurea/Polysilicate Hybrid Resins
Procedia Structural Integrity. Bd. 13. Amsterdam: Elsevier B.V. 2018 S. 143 - 148

Rimmel, Oliver; May, David; Mitschang, Peter
Impact of stitching on permeability and mechanical properties of preforms manufactured by dry fiber placement
Polymer Composites. Bd. 40. H. 4. Wiley 2018 S. 1631 - 1642

Utaloff, Katja; Kothmann, Martin H.; Ciesielski, Michael et al.
Improvement of fracture toughness and glass transition temperature of DGEBA-based epoxy systems using toughening and crosslinking modifiers
Polymer Engineering & Science. Bd. 59. H. 1. Wiley 2018 S. 86 - 95

Kieren-Ehses, Sonja; Bohley, Martin; Arrabiyeh, Peter et al.
Influence of different metal working fluids when micro machining cp-titanium with 50 µm diameter micro end mills
Procedia CIRP. Bd. 71. Elsevier B.V. 2018 S. 198 - 202

Gebhard, Andreas; Jim, Bai-Cheng; Wetzel, Bernd
Moderne Prüftechnik in der Tribologie: Zeitauflösende optische Detektion und Quantifizierung von Transferfilmen in Kunststoff-Stahl-Gleitkontakten
München. 2018

Gebhard, Andreas; Jim, Bai-Cheng; Wetzel, Bernd
Neues Verfahren zur quantitativen in situ-Erfassung von Transferfilmen in Kunststoff-Metall-Gleitkontakten
Göttingen. 2018

Neumeyer, Thomas; Bauernfeind, Anika; Eigner, Verena et al.
Novel epoxy prepreg resins for aircraft interiors based on combinations of halogen-free flame retardants
CEAS Aeronautical Journal. Bd. 9. H. 1. Springer 2018 S. 235 - 248

Fauster, Ewald; Berg, David C.; May, David et al.
Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments
Advanced Manufacturing: Polymer & Composites Science. Bd. 4. H. 1. Informa UK Limited 2018 S. 24 - 40

Akpan, E. I.; Gbenebor, O. P.; Adeosun, S. O.
Synthesis and characterisation of chitin from periwinkle (Tympanotonus fusatus (L.)) and snail (Lissachatina fulica (Bowdich)) shells
International Journal of Biological Macromolecules. Bd. 106. Elsevier B.V. 2018 S. 1080 - 1088

Bajpai, Ankur; Alapati, Arun; Klingler, Andreas et al.
Tensile Properties, Fracture Mechanics Properties and Toughening Mechanisms of Epoxy Systems Modified with Soft Block Copolymers, Rigid TiO2 Nanoparticles and Their Hybrids
Journal of Composites Science. Bd. 2. H. 4. MDPI AG 2018 S. 72

Klingler, Andreas; Bajpai, Ankur; Wetzel, Bernd
The effect of block copolymer and core-shell rubber hybrid toughening on morphology and fracture of epoxy-based fibre reinforced composites
Engineering Fracture Mechanics. Bd. 203. Elsevier B.V. 2018 S. 81 - 101

Walter, Rolf; Gebhard, Andreas; Gurka, Martin et al.
Verbesserung der Gleitverschleißeigenschaften durch Schmierstoffzuführung in einer porösen, additiv gefertigten Kunststoffstruktur
Göttingen. 2018

Setti, Dinesh; Kirsch, Benjamin; Arrabiyeh, Peter A. et al.
Visualization of Geometrical Deviations in Micro Grinding by Kinematic Simulations
Processes. Bd. 4. College Station: American Society of Mechanical Engineers 2018

May, David; Domm, Matthias; Mitschang, Peter
Wet Fiber Placement: A novel manufacturing technology for continuous fiber reinforced polymer composites
Journal of Composite Materials. Bd. 53. H. 4. SAGE Publications 2018 S. 521 - 533

Felipe-Sesé, Luis; López-Alba, Elías; Hannemann, Benedikt et al.
A Validation Approach for Quasistatic Numerical/Experimental Indentation Analysis in Soft Materials Using 3D Digital Image Correlation
Materials. Bd. 10. H. 7. MDPI AG 2017 S. 722

Kirsch, Benjamin; Bohley, Martin; Arrabiyeh, Peter et al.
Application of Ultra-Small Micro Grinding and Micro Milling Tools: Possibilities and Limitations
Micromachines. Bd. 8. H. 9. MDPI 2017 S. 261

Hausmann, Joachim; Helfrich, Bernhard; Motsch, Nicole
Aspects of Preloaded Bolted Joints of Fiber Reinforced Polymers and Metals
Key Engineering Materials. Bd. 742. Trans Tech Publications, Ltd. 2017 S. 401 - 407

Rimmel, Oliver; Mack, Jens; Becker, David et al.
Automated Direct Fibre Placement with Online Binder Application
Lightweight Design worldwide. Bd. 10. H. 2. Springer Science and Business Media LLC 2017 S. 48 - 53

Rimmel, Oliver; Mack, Jens; Becker, David et al.
Automatisierte Faserdirektablage mit Online-Bebinderung
Lightweight Design. Bd. 10. H. 2. Springer Science and Business Media LLC 2017 S. 56 - 61

Jung, Gihune; Schmeer, Sebastian; Mitschang, Peter
Crash behaviour and performance of long fibre reinforced thermoplastic material in comparison with continuous fibre reinforcement
International Journal of Crashworthiness. Bd. 23. H. 4. Informa UK Limited 2017 S. 433 - 445

Ruediger, Patrick; Hagen, Hans
Dealing with Uncertainties in Manufacturing Process Simulations
Applied Mechanics and Materials. Bd. 869. Trans Tech Publications, Ltd. 2017 S. 226 - 233

Rief, Thomas; Hausmann, Joachim; Motsch, Nicole
Development of a New Method for Residual Stress Analysis on Fiber Reinforced Plastics with Use of Digital Image Correlation
Key Engineering Materials. Bd. 742. Trans Tech Publications, Ltd. 2017 S. 660 - 665

Arrabiyeh, Peter; Bohley, Martin; Ströer, Felix et al.
Experimental Analysis for the Use of Sodium Dodecyl Sulfate as a Soluble Metal Cutting Fluid for Micromachining with Electroless-Plated Micropencil Grinding Tools
Inventions. Bd. 2. H. 4. MDPI 2017 29

Klingler, Andreas; Wetzel, Bernd
Fatigue crack propagation in triblock copolymer toughened epoxy nanocomposites
Polymer Engineering & Science. Bd. 57. H. 6. Wiley 2017 S. 579 - 587

Kopietz, Mark; Bilgin, Fatih; Grishchuk, Sergiy et al.
Fiber/Matrix Adhesion in Glass Fiber Reinforced Inorganic-Organic Polyurea/Polysilicate Resins
Key Engineering Materials. Bd. 742. Trans Tech Publications, Ltd. 2017 S. 9 - 16

Kropka, Michael; Muehlbacher, Mathias; Neumeyer, Thomas et al.
From UD-tape to Final Part: A Comprehensive Approach Towards Thermoplastic Composites
Procedia CIRP. Bd. 66. Elsevier B.V. 2017 S. 96 - 100

Hannemann, B.; Backe, S.; Schmeer, Sebastian et al.
Hybridisation of CFRP by the use of continuous metal fibres (MCFRP) for damage tolerant and electrically conductive lightweight structures
Composite Structures. Bd. 172. Elsevier B.V. 2017 S. 374 - 382

Grieser, Timo; Becker, David; Mitschang, Peter
Investigation of the bending behaviour of multi-ply dry carbon fibre non-crimped fabrics
The Journal of The Textile Institute. Bd. 109. H. 4. Informa UK Limited 2017 S. 455 - 465

Utzig, Lukas; Karch, Christian; Rehra, Jan et al.
Modeling and simulation of the effective strength of hybrid polymer composites reinforced by carbon and steel fibers
Journal of Materials Science. Bd. 53. H. 1. Springer Science and Business Media LLC 2017 S. 667 - 677

McGregor, O.P.L.; Duhovic, Miro; Somashekar, A.A. et al.
Pre-impregnated natural fibre-thermoplastic composite tape manufacture using a novel process
Composites Part A: Applied Science and Manufacturing. Bd. 101. Elsevier B.V. 2017 S. 59 - 71

Akpan, Emmanuel I.; Wetzel, Bernd; Friedrich, Klaus
Processing and properties of short wood fiber/acrylate resin composites
Polymer Composites. Bd. 40. H. 1. Wiley 2017 S. 91 - 98

Kropka, Michael; Selvaraj, Karthick; Neumeyer, Thomas et al.
Production of UD-Tape Based Thermoplastic Composite Parts
Lightweight Design worldwide. Bd. 10. H. 3. Springer 2017 S. 6 - 11

Aurich, Jan C.; Müller, Christopher; Bohley, Martin et al.
Recent Developments in Desktop-Sized Machine Tools
Solid State Phenomena. Bd. 261. Trans Tech Publications, Ltd. 2017 S. 425 - 431

Friedrich, K.; Akpan, E. I.; Wetzel, Bernd
Structure and mechanical/abrasive wear behavior of a purely natural composite: black-fiber palm wood
Journal of Materials Science. Bd. 52. H. 17. Springer Science and Business Media LLC 2017 S. 10217 - 10229

Weber, Tobias A; Arent, Jan-Christoph; Steffens, Lucas et al.
Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation
Journal of Composite Materials. Bd. 51. H. 12. SAGE Publications 2017 S. 1753 - 1767

Gbenebor, Oluwashina Ph.; Akpan, Emmanuel I.; Adeosun, Samson O.
Thermal, structural and acetylation behavior of snail and periwinkle shells chitin
Progress in Biomaterials. Bd. 6. H. 3. Springer 2017 S. 97 - 111

Klingler, Andreas; Sorochynska, Liubov; Wetzel, Bernd
Toughening of Glass Fiber Reinforced Unsaturated Polyester Composites by Core-Shell Particles
Key Engineering Materials. Bd. 742. Trans Tech Publications, Ltd. 2017 S. 74 - 81

Srinivasan, M.; Maettig, P.; Glitza, K. W. et al.
Validation of Numerical Modeling for the Prediction of Elastic and Failure Behavior of Diamond Powder Filled Woven Composites
Open Journal of Composite Materials. Bd. 07. H. 02. Scientific Research Publishing, Inc. 2017 S. 63 - 84

Kropka, Michael; Selvaraj, Karthick; Neumeyer, Thomas et al.
Vom UD-Tape zum thermoplastischen Faserverbundprodukt
Lightweight Design. Bd. 10. H. 3. Springer 2017 S. 14 - 19

Padenko, E; van Rooyen, LJ; Wetzel, Bernd et al.
“Ultralow” sliding wear polytetrafluoro ethylene nanocomposites with functionalized graphene
Journal of Reinforced Plastics and Composites. Bd. 35. H. 11. SAGE Publications 2016 S. 892 - 901

Weber, Tobias A.; Arent, Jan-Christoph; Münch, Lukas et al.
A fast method for the generation of boundary conditions for thermal autoclave simulation
Composites Part A: Applied Science and Manufacturing. Bd. 88. Elsevier B.V. 2016 S. 216 - 225

Becker, David; Grössing, Harald; Konstantopoulos, Spiridon et al.
An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study
Advanced Manufacturing: Polymer & Composites Science. Bd. 2. H. 1. Informa UK Limited 2016 S. 34 - 45

Medina, Luisa; Kühn, F.; Becker, D. et al.
Ceramic pressing tool for variothermal processing of thermoplastic fiber composites
17 (Hrsg). European Conference on Composite Materials. München. 2016

Breuer, Ulf Paul
Commercial Aircraft Composite Technology
Cham: Springer International Publishing - Springer 2016 260 S.

Arrabiyeh, Peter A.; Kirsch, Benjamin; Aurich, Jan C.
Development of Micro Pencil Grinding Tools Via an Electroless Plating Process
Journal of Micro and Nano-Manufacturing. Bd. 5. H. 1. ASME International 2016 S. 11002 - 11007

Arrabiyeh, Peter A.; Kirsch, Benjamin; Aurich, Jan C.
Development of Micro Pencil Grinding Tools via an Electroless Plating Process
Processing. Bd. 1. Charlotte: American Society of Mechanical Engineers 2016 V001T02A006

Zhang, Ligang; Zhang, Ga; Chang, Li et al.
Distinct tribological mechanisms of silica nanoparticles in epoxy composites reinforced with carbon nanotubes, carbon fibers and glass fibers
Tribology International. Bd. 104. Elsevier B.V. 2016 S. 225 - 236

ADEOSUN, S.O.; AKPAN, E.I.; GBENEBOR, O.P. et al.
Ductility and hardness of chloride cleaned AA6011/SiCp composites
Transactions of Nonferrous Metals Society of China. Bd. 26. H. 2. Elsevier B.V. 2016 S. 339 - 347

Medina, Luisa; Christmann, M.; Mitschang, P.
Effect of Inhomogeneous Temperature Distribution on the Impregnation Process of hte Continuous Compression Molding Technology
Journal of Thermoplastic Polymer Composite Materials. Bd. 30. H. 9. 2016 S. 1285 - 1302

Arrabiyeh, Peter; Raval, Vandeet; Kirsch, Benjamin et al.
Electroless Plating of Micro Pencil Grinding Tools with 5-10 μm Sized cBN Grits
Advanced Materials Research. Bd. 1140. Trans Tech Publications, Ltd. 2016 S. 133 - 140

Qi, Huimin; Zhang, Ga; Wetzel, Bernd et al.
Exploring the influence of counterpart materials on tribological behaviors of epoxy composites
Tribology International. Bd. 103. Elsevier B.V. 2016 S. 566 - 573

Klingler, Andreas; Wetzel, Bernd
Fatigue crack propagation in self-assembling nanocomposites
AIP Conference Proceedings. Neapel: AIP 2016

Hübler, Moritz; Nissle, Sebastian; Gurka, Martin et al.
Fiber-reinforced polymers with integrated shape memory alloy actuation: an innovative actuation method for aerodynamic applications
CEAS Aeronautical Journal. Bd. 7. H. 4. Springer Science and Business Media LLC 2016 S. 567 - 576

Adeosun, S.O.; Akpan, E. I.; Gbenebor, O.P. et al.
Filler Surface Nature, Bead, Solution Viscosity and Fibre Diameter of Electrospun Particle-Reinforced Polylactide
145th Annual Meeting & Exhibition: Supplemental Proceedings. Nashville: Wiley 2016 S. 101 - 108

Adeosun, S. O.; Gbenebor, O. P.; Akpan, E. I. et al.
Influence of Organic Fillers on Physicochemical and Mechanical Properties of Unsaturated Polyester Composites
Arabian Journal for Science and Engineering. Bd. 41. H. 10. Springer 2016 S. 4153 - 4159

Arnold, M.; Gortner, F.; Cojutti, M. et al.
Influence of Textile Parameters on the Out-of-Plane Permeability of Carbon Fiber Non-Crimp Fabrics
Advanced Composites Letters. Bd. 25. H. 5. Sage 2016 S. 121 - 126

Heberger, Lukas; Kirsch, Benjamin; Donhauser, Tobias et al.
Influence of the Quality of Rivet Holes in Carbon-fiber-reinforced-polymer (CFRP) on the Connection Stability
Procedia Manufacturing. Bd. 6. Elsevier B.V. 2016 S. 140 - 147

Medina, Luisa; Dzalto, J.; Mitschang, P.
Investigation of the Infrared Heating of Natural Fiber Reinforced Thermoplastic Materials
17 (Hrsg). European Conference on Composite Materials. München. 2016

Rimmel, Oliver; Becker, David; Mitschang, Peter
Maximizing the out-of-plane-permeability of preforms manufactured by dry fiber placement
Advanced Manufacturing: Polymer & Composites Science. Bd. 2. H. 3-4. Informa UK Limited 2016 S. 93 - 102

Adeosun, Samson; Taiwo, Omotayo; Akpan, Emmanuel et al.
Mechanical characteristics of groundnut shell particle reinforced polylactide nano fibre
Matéria (Rio de Janeiro). Bd. 21. H. 2. FapUNIFESP (SciELO) 2016 S. 482 - 491

Hannemann, B.; Schmeer, Sebastian; Breuer, Ulf et al.
Metal and carbon united: Electrical function integration
Breuer, Ulf Paul (Hrsg). Commercial Aircraft Composite Technology. Cham: Springer International Publishing 2016 S. 220 - 234

Hannemann, B.; Backe, S.; Schmeer, S. et al.
Metal fiber incorporation in carbon fiber reinforced polymers (CFRP) for improved electrical conductivity
Materialwissenschaft und Werkstofftechnik. Bd. 47. H. 11. Wiley 2016 S. 1015 - 1023

Netz, Johannes; Hannemann, Benedikt; Schmeer, Sebastian
Micro-leveled modeling of structural stitched FRP joints as energy absorbing rupture points
Composite Structures. Bd. 157. Elsevier B.V. 2016 S. 131 - 140

Dmitriev, Andrey I.; Häusler, Ines; Österle, Werner et al.
Modeling of the stress–strain behavior of an epoxy-based nanocomposite filled with silica nanoparticles
Materials & Design. Bd. 89. Elsevier B.V. 2016 S. 950 - 956

Nissle, Sebastian; Hübler, Moritz; Gurka, Martin
Modellierung des elektrischen Widerstands von Formgedächtnislegierungen – Selfsensing für die Zustandsüberwachung von aktiven Hybridverbunden
Melz, Tobias ; Wiedemann, Martin (Hrsg). Smarte Strukturen und Systeme. Berlin u. a.: De Gruyter Oldenbourg 2016 S. 258 - 268

Medina, Luisa; Gortner, F.
Naturauto: Einfluss der Verarbeitungsparameter und der Prüfnorm auf die mechanischen Eigenschaften von NFPP-Verbundwerkstoffen
Naturfaserverstärkte Kunststoffe. 2. Fachtagung. Aufl. Kaiserslautern. 2016

López-Alba, E.; Felipe-Sesé, L.; Schmeer, S. et al.
Optical low-cost and portable arrangement for full field 3D displacement measurement using a single camera
Measurement Science and Technology. Bd. 27. H. 11. IOP 2016 115901

Medina, Luisa; Gortner, F.; Mitschang, P.
Optimized bast fiber reinfroced polypropylene for automotive applications,
ECCM17 (Hrsg). München. 2016

Adeosun, S. O.; Akpan, E. I.; Gbenebor, O. P. et al.
Refractory Behaviors of Magnetite–Kaolin Bricks
JOM. Bd. 68. H. 11. Springer 2016 S. 2824 - 2831

Holschuh, René; Becker, David; Mitschang, Peter
Techno-Economic Feasibility Study of New Concept for Build-Up of Local Load Specific Reinforced Hybrid Structures
Polymers and Polymer Composites. Bd. 24. H. 5. SAGE Publications 2016 S. 347 - 364

Österle, W.; Dmitriev, A.I.; Wetzel, B. et al.
The role of carbon fibers and silica nanoparticles on friction and wear reduction of an advanced polymer matrix composite
Materials & Design. Bd. 93. Elsevier B.V. 2016 S. 474 - 484

Zhang, G.; Österle, Werner; Jim, Baicheng et al.
The role of surface topography in the evolving microstructure and functionality of tribofilms of an epoxy-based nanocomposite
Wear. Bd. 364-365. Elsevier B.V. 2016 S. 48 - 56

Mühlbacher, Mathias; Hornfeck, Christoph; Neumeyer, Thomas et al.
Thermoplastische Sandwichstrukturen aus Luftfahrtmaterialien
Lightweight Design. Bd. 9. H. 4. Springer 2016 S. 44 - 49

Zhao, Fuyan; Gao, Chuanping; Wang, Honggang et al.
Tribological Behaviors of Carbon Fiber Reinforced Epoxy Composites Under PAO Lubrication Conditions
Tribology Letters. Bd. 62. H. 3. Springer Science and Business Media LLC 2016 37

Gao, C.P.; Guo, G.F.; Zhao, F.Y. et al.
Tribological behaviors of epoxy composites under water lubrication conditions
Tribology International. Bd. 95. Elsevier B.V. 2016 S. 333 - 341

Gurka, Martin
Active hybrid structures made of shape memory alloys and fiber-reinforced composites
Friedrich, Klaus ; Breuer, Ulf (Hrsg). Multifunctionality of Polymer Composites. Oxford u. a.: Elsevier 2015 S. 727 - 751

Hübler, Moritz; Nissle, Sebastian; Gurka, Martin et al.
Aerodynamic Applications of SMA FRP Structures: An Active Airfoil, From Idea to Real Hardware
Volume 2: Integrated System Design and Implementation; Structural Health Monitoring; Bioinspired Smart Materials and Systems; Energy Harvesting. Houston: American Society of Mechanical Engineers 2015

Groessing, H.; Becker, David; Kaufmann, S. et al.
An evaluation of the reproducibility of capacitive sensor based in-plane permeability measurements:A benchmarking study
Express Polymer Letters. Bd. 9. H. 2. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2015 S. 129 - 142

Becker, David; Broser, J.; Mitschang, Peter
An experimental study of the influence of process parameters on the textile reaction to transverse impregnation
Polymer Composites. Bd. 37. H. 9. Wiley 2015 S. 2820 - 2831

Adeosun, S. O.; Akpan, E. I.; Balogun, S. A. et al.
Anisotropic Responses of Mechanical and Thermal Processed Cast Al-Si-Mg-Cu Alloy
JOM. Bd. 67. H. 5. Springer 2015 S. 916 - 921

Medina, L.; Dzalto, J.; Mitschang, P.
Biobased composite: Sandwiches for automotive applications
Bioplastics Magazine. Bd. 1. H. 10. 2015 S. 16 - 18

Akpan, Emmanuel I.; Adeosun, Samson O.; Lawal, Ganiyu I. et al.
Characterization of Adhesion Surface of Cellulosic Fibers Extracted from Agro Wastes
Journal of Natural Fibers. Bd. 13. H. 1. Informa UK Limited 2015 S. 103 - 124

Smaga, M.; Beck, T.; Arrabiyeh, P. et al.
Characterization of micro machined surface from TRIP/TWIP steels
MATEC Web of Conferences. Bd. 33. EDP Sciences 2015 S. 7004

Krooß, Tim; Gurka, Martin; Van der Schueren, Lien et al.
Cost-Effective Microfibrillar Reinforced Composites for Lightweight Applications
Materials Science Forum. Bd. 825-826. Trans Tech Publications, Ltd. 2015 S. 44 - 52

Sharma, S.; Padenko, E.; Bijwe, J. et al.
Erosive and sliding wear of polybenzimidazole at elevated temperatures
Journal of Materials Science. Bd. 51. H. 1. Springer Science and Business Media LLC 2015 S. 262 - 270

Adeosun, S. O.; Akpan, E. I.; Dada, M. O.
Erratum to: Refractory Characteristics of Aluminum Dross-Kaolin Composite
JOM. Bd. 67. H. 6. Springer 2015 S. 1392

Österle, W.; Dmitriev, A.I.; Gradt, T. et al.
Exploring the beneficial role of tribofilms formed from an epoxy-based hybrid nanocomposite
Tribology International. Bd. 88. Elsevier B.V. 2015 S. 126 - 134

Österle, W.; Giovannozzi, A.; Gradt, T. et al.
Exploring the potential of Raman spectroscopy for the identification of silicone oil residue and wear scar characterization for the assessment of tribofilm functionality
Tribology International. Bd. 90. Elsevier B.V. 2015 S. 481 - 490

Zhang, G.; Häusler, I.; Österle, W. et al.
Formation and function mechanisms of nanostructured tribofilms of epoxy-based hybrid nanocomposites
Wear. Bd. 342-343. Elsevier B.V. 2015 S. 181 - 188

Zhang, G.; Wetzel, Bernd; Jim, B. et al.
Impact of counterface topography on the formation mechanisms of nanostructured tribofilm of PEEK hybrid nanocomposites
Tribology International. Bd. 83. Elsevier B.V. 2015 S. 156 - 165

Kasperovich, Galina; Hausmann, Joachim
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Journal of Materials Processing Technology. Bd. 220. Elsevier B.V. 2015 S. 202 - 214

Becker, David; Mitschang, Peter
Influence of preforming technology on the out-of-plane impregnation behavior of textiles
Composites Part A: Applied Science and Manufacturing. Bd. 77. Elsevier B.V. 2015 S. 248 - 256

Gortner, Florian; Medina, Luisa; Mitschang, Peter
Influence of Textile Reinforcement on Bending Properties and Impact Strength of SMC-components
International Journal of Applied Science and Technology. Bd. 25. H. 5. King Mongkut's University of Technology North Bangkok 2015 S. 1 - 11

Padenko, E; Berki, P; Wetzel, Bernd et al.
Mechanical and abrasion wear properties of hydrogenated nitrile butadiene rubber of identical hardness filled with carbon black and silica
Journal of Reinforced Plastics and Composites. Bd. 35. H. 1. SAGE Publications 2015 S. 81 - 91

Adeosun, S. O.; Akpan, E. I.; Gbenebor, O. P. et al.
Mechanical Behavior of Electrospun Palmfruit Bunch Reinforced Polylactide Composite Fibers
JOM. Bd. 68. H. 1. Springer 2015 S. 265 - 270

Dmitriev, Andrey I.; Österle, Werner; Wetzel, Bernd et al.
Mesoscale modeling of the mechanical and tribological behavior of a polymer matrix composite based on epoxy and 6vol.% silica nanoparticles
Computational Materials Science. Bd. 110. Elsevier B.V. 2015 S. 204 - 214

Adeosun, S. O.; Akpan, E. I.; Gbenebor, O. P. et al.
Microstructural Evolution of Chloride-Cleaned Silicon Carbide Aluminum Composites
JOM. Bd. 68. H. 2. Springer 2015 S. 692 - 700

Gussone, Joachim; Hagedorn, Yves-Christian; Gherekhloo, Human et al.
Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures
Intermetallics. Bd. 66. Elsevier B.V. 2015 S. 133 - 140

Hassinger, Irene; Gurka, Martin
Morphology of PA6 nanocomposites prepared by pressurized insertion of aqueous nanoparticle dispersions
Nanocomposites. Bd. 1. H. 2. Informa UK Limited 2015 S. 63 - 70

Friedrich, Klaus; Breuer, Ulf
Multifunctionality of Polymer Composites
Oxford u. a.: Elsevier 2015 996 S.

Komatsu, Shintaro; Wetzel, Bernd; Friedrich, Klaus
Novel Liquid Crystal Polymers with Tailored Chemical Structure for High Barrier, Mechanical and Tribological Performance
Thakur, Vijay Kumar ; Kessler, Michael R. (Hrsg). Liquid Crystalline Polymers : Processing and Applications. Cham: Springer International Publishing 2015 S. 15 - 39

Kämper, Christoph; Krummenacker, Janna; Forman, Patrick et al.
Slender large-scale parabolic troughs using shape-optimized hollow structures made of high-strength concrete
Proceedings of the 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN). Kreta: Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) 2015

Adeosun, S. O.; Oyetunji, A.; Akpan, E. I.
Strength and Ductility of Forged 1200 Aluminum Alloy Reinforced with Steel Particles
Nigerian Journal of Technology. Bd. 34. H. 4. African Journals Online (AJOL) 2015 S. 710

Neumeyer, Thomas
Struktur und Eigenschaften neuer, flammgeschützter Prepreg-Matrixsysteme für Anwendungen in der Kabine von Verkehrsflugzeugen
Hamburg: TuTech 2015 191 S.

Godard, C.; Klingler, A.; Junker, T. et al.
The Applicability of Nanoindentation for the Examination of Microstructured Areas in CP Titanium Samples
Practical Metallography. Bd. 52. H. 6. De Gruyter 2015 S. 314 - 322

Akpan, E. I.; Adeosun, S. O.; Lawal, G. I. et al.
Thermal characteristics of batch-processed biodegradable cellulosic fibres
International Journal of Microstructure and Materials Properties. Bd. 10. H. 3/4. Inderscience Publishers 2015 S. 172

Becker, David
Transversales Imprägnierverhalten textiler Verstärkungsstrukturen für Faser-Kunststoff-Verbunde
Kaiserslautern: Institut für Verbundwerkstoffe GmbH 2015 150 S. (IVW-Schriftenreihe ; Band 117)

Zhang, G.; Wetzel, Bernd; Wang, Q.
Tribological behavior of PEEK-based materials under mixed and boundary lubrication conditions
Tribology International. Bd. 88. Elsevier B.V. 2015 S. 153 - 161

Wan, Yun; Liu, Steven; Hümbert, Martina et al.
Advanced Measurement, Characterization and Simulation of Thermoplastic Composite Induction Welding
KMUTNB International Journal of Applied Science and Technology. Bd. 7. H. 4. King Mongkut's University of Technology North Bangkok 2014 S. 1 - 12

Adeosun, Samson O.; Usman, Mohammed A.; Akpan, Emmanuel I. et al.
Characterization of LDPE Reinforced with Calcium Carbonate: Fly Ash Hybrid Filler
Journal of Minerals and Materials Characterization and Engineering. Bd. 2. H. 4. Scientific Research Publishing, Inc. 2014 S. 334 - 345

Wirjadi, Oliver; Godehardt, Michael; Schladitz, Katja et al.
Characterization of multilayer structures in fiber reinforced polymer employing synchrotron and laboratory X-ray CT
International Journal of Materials Research. Bd. 105. H. 7. Carl Hanser Verlag 2014 S. 645 - 654

Almajid, A.; Sorochynska, L.; Friedrich, K. et al.
Effects of graphene and CNT on mechanical, thermal, electrical and corrosion properties of vinylester based nanocomposites
Plastics, Rubber and Composites. Bd. 44. H. 2. Informa UK Limited 2014 S. 50 - 62

Hübler, Moritz; Gurka, Martin; Breuer, Ulf P.
From attached shape memory alloy wires to integrated active elements, a small step? Impact of local effects on direct integration in fiber reinforced plastics
Journal of Composite Materials. Bd. 49. H. 15. SAGE Publications 2014 S. 1895 - 1905

Andrä, Heiko; Gurka, Martin; Kabel, Matthias et al.
Geometric and Mechanical Modeling of Fiber-Reinforced Composites
Bernard, Dominique u. a. (Hrsg). The 2nd International Congress on 3D Materials Science : Congress Proceedings. Cham: Springer International Publishing 2014 S. 35 - 40

Mitschang, Peter; Duhovic, Miro; Arnold, M. et al.
Grundlagen der Verarbeitungsprozesse
Neitzel, Manfred ; Mitschang, Peter ; Breuer, Ulf (Hrsg). Handbuch Verbundwerkstoffe : Werkstoffe, Verarbeitung, Anwendung. 2., aktualisierte und erw. Aufl. München: Hanser 2014 S. 201 - 275

Neitzel, Manfred; Mitschang, Peter; Breuer, Ulf
Handbuch Verbundwerkstoffe : Werkstoffe, Verarbeitung, Anwendung
2., aktualisierte und erw. Aufl. Aufl. München ; Wien: Hanser 2014 554 S.

Neumeyer, Thomas; Staudigel, Christian; Bonotto, Giancarlo et al.
Influence of an imidazolium salt on the curing behaviour of an epoxy-based hot-melt prepreg system for non-structural aircraft applications
CEAS Aeronautical Journal. Bd. 6. H. 1. Springer 2014 S. 31 - 37

Becker, David; Mitschang, Peter
Measurement System for On-Line Compaction Monitoring of Textile Reaction to Out-of-Plane Impregnation
Advanced Composites Letters. Bd. 23. H. 2. SAGE Publications 2014 S. 32 - 36

Medina, Luisa; Dzalto, Jovana; Mitschang, Peter
Natural fibers gently heated
Kunststoffe International. Bd. 10. 2014 S. 110 - 113

Hildebrandt, Klaus; Mack, Jens; Becker, David et al.
Potenziale neuer Matrixpolymere für die FKV-Bauteilfertigung
Lightweight Design. Bd. 7. H. 2. Springer Science and Business Media LLC 2014 S. 14 - 21

Adeosun, S. O.; Akpan, E. I.; Dada, M. O.
Refractory Characteristics of Aluminum Dross-Kaolin Composite
JOM. Bd. 66. H. 11. Springer 2014 S. 2253 - 2261

Bayerl, Thomas; Duhovic, Miro; Mitschang, Peter et al.
The heating of polymer composites by electromagnetic induction – A review
Composites Part A: Applied Science and Manufacturing. Bd. 57. Elsevier B.V. 2014 S. 27 - 40

Güttler, B.; Moresoli, C.
Characterization of oilseed meals for their application in biocomposites
Lyon. 2013

Güttler, Barbara; Moresoli, Christine; Simon, Leonardo C.
Contact angle and surface energy analysis of soy materials subjected to potassium permanganate and autoclave treatment
Industrial Crops and Products. Bd. 50. Elsevier B.V. 2013 S. 219 - 226

Heimbs, S.; Hoffmann, M.; Waimer, M. et al.
Dynamic testing and modelling of composite fuselage frames and fasteners for aircraft crash simulations
International Journal of Crashworthiness. Bd. 18. H. 4. Informa UK Limited 2013 S. 406 - 422

Noll, Andreas; Friedrich, Klaus; Burkhart, Thomas et al.
Effective multifunctionality of poly(p-phenylene sulfide) nanocomposites filled with different amounts of carbon nanotubes, graphite, and short carbon fibers
Polymer Composites. Bd. 34. H. 9. Wiley 2013 S. 1405 - 1412

Marquart, M.; Wahl, M.; Emrich, S. et al.
Enhancing the lifetime of MoS2-lubricated ball bearings
Wear. Bd. 303. H. 1-2. Elsevier B.V. 2013 S. 169 - 177

Schmeer, Sebastian; Balle, Frank; Didi, Mirja et al.
Experimental and Computational Analysis of Multi-Spot Welded Hybrid Al/CFRP-Structures on Component Level
Advanced Engineering Materials. Bd. 15. H. 9. Wiley 2013 S. 868 - 873

Schmeer, Sebastian; Balle, Frank; Didi, Mirja et al.
Experimental and Numerical Characterization of Spot Welded Hybrid Al/CFRP-Joints on Coupon Level
Advanced Engineering Materials. Bd. 15. H. 9. Wiley 2013 S. 853 - 860

Neumeyer, Thomas; Bonotto, Giancarlo; Kraemer, Johannes et al.
Fire behaviour and mechanical properties of an epoxy hot-melt resin for aircraft interiors
Composite Interfaces. Bd. 20. H. 6. Informa UK Limited 2013 S. 443 - 455

Sebastian, R.; Noll, A.; Zhang, G. et al.
Friction and wear of PPS/CNT nanocomposites with formation of electrically isolating transfer films
Tribology International. Bd. 64. Elsevier Ltd. 2013 S. 187 - 195

Schneider, F.; Kirsch, B.; Gurka, Martin et al.
Improved Quality of Drilled Holes in Laminated Carbon Fiber Reinforced Plastics via Laser-Preprocessing
Denkena, Berend (Hrsg). New Production Technologies in Aerospace Industry : Proceedings of the 4th Machining Innovations Conference, Hannover, September 2013. Cham: Springer International Publishing 2013 S. 27 - 31 (Lecture Notes in Production Engineering)

Güttler, Barbara; Moresoli, Christine; Simon, Leonardo C.
Mechanical properties and crack propagation of soy-polypropylene composites
Journal of Applied Polymer Science. Bd. 130. H. 1. Wiley 2013 S. 175 - 185

Corsetti, Rodrigo R.; Neumeyer, Thomas; May, Manuela et al.
Modeling and estimation of parameters for the curing of an epoxy/amine system
Polymer Testing. Bd. 32. H. 4. Elsevier 2013 S. 647 - 654

Hübler, M.; Gurka, Martin; Schmeer, Sebastian et al.
Performance range of SMA actuator wires and SMA–FRP structure in terms of manufacturing, modeling and actuation
Smart Materials and Structures. Bd. 22. H. 9. IOP Publishing 2013 S. 94002

Hübler, Moritz; Nissle, Sebastian; Gurka, Martin et al.
Smart Crash Management by Switching the Crash Behavior of Fiber-Reinforced Plastic (FRP) Energy Absorbers With Shape Memory Alloy (SMA) Wires
Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation. Snowbird: American Society of Mechanical Engineers 2013

Heimbs, Sebastian; Schmeer, Sebastian; Blaurock, Jörg et al.
Static and dynamic failure behaviour of bolted joints in carbon fibre composites
Composites Part A: Applied Science and Manufacturing. Bd. 47. Elsevier Ltd. 2013 S. 91 - 101

Zhu, Dong Yu; Wetzel, Bernd; Noll, Andreas et al.
Thermo-molded self-healing thermoplastics containing multilayer microreactors
Journal of Materials Chemistry A. Bd. 1. H. 24. Royal Society of Chemistry (RSC) 2013 S. 7191 - 7198

Grishchuk, S.; Bonyar, A.; Elsäßer, J. et al.
Toward reliable morphology assessment of thermosets via physical etching: Vinyl ester resin as an example
eXPRESS Polymer Letters. Bd. 7. H. 5. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2013 S. 407 - 415

Zhang, G.; Burkhart, T.; Wetzel, Bernd
Tribological behavior of epoxy composites under diesel-lubricated conditions
Wear. Bd. 307. H. 1-2. Elsevier B.V. 2013 S. 174 - 181

Schuster, J.; Duhovic, Miro; Bhattacharyya, D.
Chapter 1: Manufacturing and Processing of Polymer Composites
Bhattacharyya, Debes ; Fakirov, Stoyko (Hrsg). Synthetic polymer-polymer composites. München ; Cincinnati, Ohio: Hanser 2012 S. 1 - 38

Duhovic, Miro; Fakirov, S.; Holschuh, R. et al.
Chapter 19: Micro-and Nanofibrillar Single Polymer Composites
Fakirov, Stoyko u. a. (Hrsg). Synthetic Polymer-Polymer Composites. München u. a.: Hanser 2012 S. 641 - 672

Advani, Suresh G.; Hsiao, Kuang-Ting; Liu, Shih-Jung et al.
Contributor contact details
Manufacturing Techniques for Polymer Matrix Composites (PMCs). Amsterdam: Elsevier 2012 S. 435 - 480

Gurka, Martin; Hübler, Moritz; Schmeer, Sebastian et al.
Load-Initiated Two-Way Effect of Shape Memory Alloys in Composite Structures and a Phenomenological Modelling Approach
Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring. Stone Mountain: American Society of Mechanical Engineers 2012

Adeosun, S. O.; Akpan, E. I.; Sekunowo, O. I. et al.
Mechanical Characteristics of 6063 Aluminum-Steel Dust Composite
ISRN Mechanical Engineering. Bd. 2012. Hindawi Limited 2012 S. 1 - 9

Duhovic, M.; Fakirov, S.; Holschuh, R. et al.
Micro- and Nanofibrillar Single Polymer Composites
Synthetic Polymer-Polymer Composites. München: Hanser 2012 S. 641 - 672

Villegas, Irene Fernandez; Moser, Lars; Yousefpour, Ali et al.
Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites
Journal of Thermoplastic Composite Materials. Bd. 26. H. 8. SAGE Publications 2012 S. 1007 - 1024

Adeosun, S. O.; Lawal, G. I.; Balogun, S. A. et al.
Review of Green Polymer Nanocomposites
Journal of Minerals and Materials Characterization and Engineering. Bd. 11. H. 4. Scientific Research Publishing, Inc. 2012 S. 385 - 416

Akpan, Emmanuel I.; Haruna, Idoko A.
Structural Evolution and Properties of Hot Rolled Steel Alloys
Journal of Minerals and Materials Characterization and Engineering. Bd. 11. H. 4. Scientific Research Publishing, Inc. 2012 S. 417 - 426

HOLSCHUH, RENÉ; BECKER, DAVID; MITSCHANG, PETER
Verfahrenskombination für mehr Wirtschaftlichkeit des FVK-Einsatzes im Automobilbau
Lightweight Design. Bd. 5. H. 4. Springer Science and Business Media LLC 2012 S. 14 - 19

Adeosun, S. O.; Akpan, E. I.; Balogun, S. A.
Wrought Aluminium Alloy Corrosion Propensity in Domestic Food Cooking Environment
ISRN Corrosion. Bd. 2012. Hindawi Limited 2012 S. 1 - 6

Gurka, Martin; Petričević, Raino; Schneider, Steffen et al.
Characterization of Step Response Time and Bandwidth of Electrorheological Fluids
Journal of Intelligent Material Systems and Structures. Bd. 22. H. 15. SAGE Publications 2011 S. 1745 - 1748

Au, K. F.; Mielicka, E.; Cooke, B. et al.
Contributor contact details
Advances in Knitting Technology. Amsterdam: Elsevier 2011 S. 11 - 12 (Textiles)

Duhovic, M.; Bhattacharyya, D.
Knitted fabric composites
Advances in Knitting Technology. UK: Elsevier 2011 S. 193 - 212 (Textiles)

Buhl, Stefan; Donhauser, Tobias
Konstruktion einer Kurbelwelle für den RS11
ATZ extra. Bd. 16. H. 12. Springer 2011 S. 38 - 45

Balle, Frank; Schmeer, Sebastian; Wagner, Guntram
Mechanische Charakterisierung ultraschallgeschweißter Aluminium/CFK-Verbunde bei automobilrelevanten Temperaturen und Prüfgeschwindigkeiten
Materials Testing. Bd. 53. H. 1-2. Carl Hanser Verlag 2011 S. 7 - 13

Duhovic, Miro; Mitschang, Peter; Bhattacharyya, D.
Modelling approach for the prediction of stitch influence during woven fabric draping
Composites Part A: Applied Science and Manufacturing. Bd. 42. H. 8. Elsevier BV 2011 S. 968 - 978

Fakirov, Stoyko; Duhovic, Miro; Maitrot, Philipp et al.
From PET Nanofibrils to Nanofibrillar Single-Polymer Composites
Macromolecular Materials and Engineering. Bd. 295. H. 6. Wiley 2010 S. 515 - 518

Khan, Muhammad Amir; Mitschang, Peter; Schledjewski, Ralf
Identification of some optimal parameters to achieve higher laminate quality through tape placement process
Advances in Polymer Technology. Bd. 29. H. 2. Wiley 2010 S. 98 - 111

Gebhard, Andreas; Bayerl, Thomas; Schlarb, Alois K. et al.
Increased wear of aqueous lubricated short carbon fiber reinforced polyetheretherketone (PEEK/SCF) composites due to galvanic fiber corrosion
Wear. Bd. 268. H. 7-8. Elsevier B.V. 2010 S. 871 - 876

Gurka, Martin; Johnston, L.; Petricevic, R.
New Electrorheological Fluids — Characteristics and Implementation in Industrial and Mobile Applications
Journal of Intelligent Material Systems and Structures. Bd. 21. H. 15. SAGE Publications 2010 S. 1531 - 1535

Mitschang, Peter
Prozessvariable Entwicklung von Faser-Kunststoff-Verbunden auf PBT-Basis : Pro-PBT-Abschlussbericht ; BMBF-Projekt Förderkreiskennzeichen: 03X3009H
Kaiserslautern: IVW 2010 95 S. (IVW-Schriftenreihe ; Bd. 91)

Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten Hybridverbindungen
Kaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)

Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten Hybridverbindungen
Kaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)

Yang, Erik C.; Duhovic, Miro; Lin, Richard J. T. et al.
Finite element modelling and analysis of composites toecaps
Materials Science and Engineering. Bd. 4. IOP 2009 12010

Gebhard, Andreas; Bayerl, Thomas; Schlarb, Alois K. et al.
Galvanic corrosion of polyacrylnitrile (PAN) and pitch based short carbon fibres in polyetheretherketone (PEEK) composites
Corrosion Science. Bd. 51. H. 11. Elsevier B.V. 2009 S. 2524 - 2528

Bettinger, Christian; Baumann, Andreas; Hausen, Frank et al.
HERA: Design Framework for Decentralized Distributed Virtual Environments and Games.
NCM. 2009 S. 876 - 881

Duhovic, Miro; Horbach, Sebastian; Bhattacharyya, Debes
Improving the Interface Strength in Flax Fibre Poly(lactic) Acid Composites
Journal of Biobased Materials and Bioenergy. Bd. 3. H. 2. American Scientific Publishers 2009 S. 188 - 198

Schmeer, Stefan; Steeg, M.; Maier, M. et al.
Metal Fibre Reinforced Composite – Potentialities and Tasks
Advanced Composites Letters. Bd. 18. H. 2. SAGE Publications 2009 S. 45 - 52

Duhovic, Miro; Bhattacharyya, Debes; Fakirov, Stoyko
Nanofibrillar Single Polymer Composites of Poly(ethylene terephthalate)
Macromolecular Materials and Engineering. Bd. 295. H. 2. Wiley 2009 S. 95 - 99

Gurka, Martin; Adams, D.; Johnston, L. et al.
New electrorheological fluids — characteristics and implementation in industrial and mobile applications
Journal of Physics: Conference Series. Bd. 149. IOP Publishing 2009 S. 1 - 6

Duhovic, Miro; Maitrot, Philipp; Fakirov, Stoyko
Polyamide 66 Polymorphic Single Polymer Composites
The Open Macromolecules Journal. Bd. 3. H. 1. Bentham Science Publishers Ltd. 2009 S. 37 - 40

Knör, N.; Gebhard, Andreas; Haupert, F. et al.
Polyetheretherketone (PEEK) nanocomposites for extreme mechanical and tribological loads
Mechanics of Composite Materials. Bd. 45. H. 2. Springer Science and Business Media LLC 2009 S. 199 - 206

Schlimbach, Jens; Ogale, A.; Schimmel, S.
Quickstep processing to control exothermic reaction during the manufacture of thick laminates
Plastics, Rubber and Composites. Bd. 38. H. 9-10. Informa UK Limited 2009 S. 374 - 378

Schuster, Martina; Ogale, Amol; Peetz, Ludwig et al.
Analysis of sewed preforms by visual on-line monitoring of stitch-hole variations under compaction
Composite Science and Technology. Bd. 68. H. 1. 2008 S. 312 - 320

Gebhard, Andreas; Haupert, Frank; Schlarb, Alois K.
Development of nanostructured slide coatings for automotive components
Friedrich, Klaus u. a. (Hrsg). Tribology of Polymeric Nanocomposites : Friction and Wear of Bulk Materials and Coatings. Amsterdam u. a.: Elsevier 2008 S. 439 - 457 (Tribology and interface engineering series ; 55)

Philipp, Martine; Gervais, P. C.; Sanctuary, Roland et al.
Effect of mixing sequence on the curing of amine-hardened epoxy/ alumina nanocomposites as assessed by optical refractometry
Express Polymer Letters. Bd. 2. H. 8. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2008 S. 546 - 552

Duhovic, Miro; Peterson, Sean D.; Jayaraman, Krishnan
Natural-fibre–biodegradable polymer composites for packaging
Properties and Performance of Natural-Fibre Composites. UK: Elsevier B.V. 2008 S. 301 - 329

Molnár, P.; Ogale, A.; Lahr, Robert et al.
Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming
Composites Science and Technology. Bd. 67. H. 15-16. Elsevier B.V. 2007 S. 3386 - 3393

Molnar, P.; Ogale, A.; Lahr, R. et al.
Influence of drapability by using stitching technology to reduce fabric deformation and shear during thermoforming
Composites Science and Technology. Bd. 67. H. 15-16. 2007 S. 3386 - 3393

Hallouet, Beatrice; Wetzel, Bernd; Pelster, Rolf
On the Dielectric and Magnetic Properties of Nanocomposites
Journal of Nanomaterials. Bd. 2007. Hindawi Limited 2007 034527

Lahr, Robert
Partielles Thermoformen endlosfaserverstärkter Thermoplaste
Kaiserslautern: IVW 2007 125 S. (IVW-Schriftenreihe ; Bd. 73)

Heimbs, Sebastian; Schmeer, Sebastian; Middendorf, Peter et al.
Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structures
Composites Science and Technology. Bd. 67. H. 13. Elsevier B.V. 2007 S. 2827 - 2837

Sanctuary, Roland; Baller, Joerg; Krüger, Jan Kristian et al.
Complex specific heat capacity of two nanocomposite systems
Thermochimica Acta. Bd. 445. H. 2. Elsevier B.V. 2006 S. 111 - 115

Wetzel, Bernd; Rosso, Patrick; Haupert, Frank et al.
Epoxy nanocomposites – fracture and toughening mechanisms
Engineering Fracture Mechanics. Bd. 73. H. 16. Elsevier B.V. 2006 S. 2375 - 2398

Lahr, R.; Mang, P.; Mitschang, P. et al.
Induktionsschweißen – ein innovatives Verfahren zum dreidimensionalen Fügen von thermoplastischen Faser-Kunststoff-Verbunden
IVW Kolloquium. Kaiserslautern: IVW 2006 S. 118 - 119

Wetzel, Bernd
Mechanische Eigenschaften von Nanoverbundwerkstoffen aus Epoxydharz und keramischen Nanopartikeln
Kaiserslautern: IVW 2006 171 S. (IVW-Schriftenreihe ; Bd. 69)

Schlimbach, Jens
Ökonomische Prozessanalyse und Modellintegration zur Kostenberechnung von Faser-Kunststoff-Verbunden
Kaiserslautern: IVW 2006 130 S. (IVW-Schriftenreihe ; Bd. 64)

Duhovic, Miro; Bhattacharyya, D.
Simulating the deformation mechanisms of knitted fabric composites
Composites Part A: Applied Science and Manufacturing. Bd. 37. H. 11. Elsevier B.V. 2006 S. 1897 - 1915

Duhovic, Miro; Bhattacharyya, Debes
Deformation Mechanisms in Knitted Fabric Composites
Friedrich, Klaus ; Fakirov, Stoyko ; Zhang, Zhong (Hrsg). Polymer Composites : From Nano- to Macro-Scale. Boston, MA: Springer US 2005 S. 265 - 288

Liudmyla, Gryshchuk; Lyudmila, Vretik; Vladimir, Syromyatnikov
Photochemical Transformations of p-(methacryloyloxy)-N-phenylimides and their Polymers Under the Action of UV-Light
Molecular Crystals and Liquid Crystals. Bd. 427. H. 1. Informa UK Limited 2005 S. 127 - 137

Haupert, Frank; Wetzel, Bernd
Reinforcement of Thermosetting Polymers by the Incorporation of Micro- and Nanoparticles
Friedrich, Klaus ; Fakirov, Stoyko ; Zhang, Zhong (Hrsg). Polymer Composites : From Nano- to Macro-Scale. Boston, MA: Springer US 2005 S. 45 - 62

Krüger, Jan Kristian; Müller, Ulrich; Bactavatchalou, Ravi et al.
The generalized Cauchy relation as an universal property of the amorphous state
Journal de Physique IV (Proceedings). Bd. 129. EDP Sciences 2005 S. 45 - 49

Friedrich, Klaus; Goda, Tibor; Varadi, Karoly et al.
Finite Element Simulation of the Fiber–Matrix Debonding in Polymer Composites Produced by a Sliding Indentor: Part I – Normally Oriented Fibers
Journal of Composite Materials. Bd. 38. H. 18. SAGE Publications 2004 S. 1583 - 1606

Goda, Tibor; VÁradi, KÁroly; Wetzel, Bernd et al.
Finite Element Simulation of the Fiber–Matrix Debonding in Polymer Composites Produced by a Sliding Indentor: Part II – Parallel and Anti-Parallel Fiber Orientation
Journal of Composite Materials. Bd. 38. H. 18. SAGE Publications 2004 S. 1607 - 1618

Mitschang, Peter
Prozessentwicklung und ganzheitliches Leichtbaukonzept zur durchgängigen, abfallfreien Preform-RTM-Fertigung : Pro-Preform-RTM - Abschlussbericht ; BMBF-Projekt. Förderkennzeichen: 02PP2460
Kaiserslautern: IVW 2004 167 S. (IVW-Schriftenreihe ; Bd. 46)

Shi, Guang; Zhang, Ming Qiu; Rong, Min Zhi et al.
Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatments
Wear. Bd. 256. H. 11-12. Elsevier B.V. 2004 S. 1072 - 1081

Rong, Min Zhi; Luo, Ying; Zhang, Ming Qiu et al.
Surface Grafting of Nano-SiC with Glycidyl Methacrylate in Emulsion and Its Effect on the Tribological Performance of Epoxy Composites
Composite Technologies for 2020. Basel: Elsevier 2004 S. 571 - 576

Lu, Jin; Zhang, Ming Qiu; Rong, Min Zhi et al.
Thermal stability of frictional surface layer and wear debris of epoxy nanocomposites in relation to the mechanism of tribological performance improvement
Journal of Materials Science. Bd. 39. H. 11. Springer 2004 S. 3817 - 3820

Ji, Qiu Long; Zhang, Ming Qiu; Rong, Min Zhi et al.
Tribological properties of surface modified nano-alumina/epoxy composites
Journal of Materials Science. Bd. 39. H. 21. Springer 2004 S. 6487 - 6493

Stöven, T.; Weyrauch, F.; Mitschang, Peter et al.
Continuous monitoring of three-dimensional resin flow through a fibre preform
Composites Part A: Applied Science and Manufacturing. Bd. 34. H. 6. Elsevier B.V. 2003 S. 475 - 480

Wetzel, Bernd; Haupert, Frank; Qiu Zhang, Ming
Epoxy nanocomposites with high mechanical and tribological performance
Composites Science and Technology. Bd. 63. H. 14. Elsevier B.V. 2003 S. 2055 - 2067

Shi, Guang; Zhang, Ming Q.; Rong, Min Zh. et al.
Friction and wear of low nanometer Si3N4 filled epoxy composites
Wear. Bd. 254. H. 7-8. Elsevier B.V. 2003 S. 784 - 796

Rong, Min Zh.; Zhang, Ming Q.; Shi, Guang et al.
Graft polymerization onto inorganic nanoparticles and its effect on tribological performance improvement of polymer composites
Tribology International. Bd. 36. H. 9. Elsevier B.V. 2003 S. 697 - 707

Gryshchuk, L. Y.; Vretik, L. O.; Syromyatnikov, V. G. et al.
Photoinitiated radical polymerization of some substituted tetrahydrophthalimido and maleimidophenyl methacrylates
Polymer International. Bd. 53. H. 1. Wiley 2003 S. 27 - 32

Mitschang, Peter; Ogale, A.; Schlimbach, Jens et al.
Preform Technology: A Necessary Requirement for Quality Controlled LCM-Processes
Polymers and Polymer Composites. Bd. 11. H. 8. SAGE Publications 2003 S. 605 - 622

Gryshchuk, Liudmyla; Vretik, Lyudmyla; Syromyatnikov, Vladimir
Dependence of polymerization ability of maleimidophenyl methacrylates on π-electron structure of maleimide fragments
Bd. 20. H. 3. Wrocław. 2002

Zhang, Ming Qiu; Rong, Min Zhi; Yu, Shu Li et al.
Effect of particle surface treatment on the tribological performance of epoxy based nanocomposites
Wear. Bd. 253. H. 9-10. Elsevier B.V. 2002 S. 1086 - 1093

Wetzel, Bernd; Haupert, Frank; Friedrich, Klaus et al.
Impact and wear resistance of polymer nanocomposites at low filler content
Polymer Engineering & Science. Bd. 42. H. 9. Wiley 2002 S. 1919 - 1927

Qiu Zhang, Ming; Zhi Rong, Min; Min Zeng, Han et al.
Atomic force microscopy study on structure and properties of irradiation grafted silica particles in polypropylene-based nanocomposites
Journal of Applied Polymer Science. Bd. 80. H. 12. Wiley 2001 S. 2218 - 2227

Zhi Rong, Min; Qiu Zhang, Ming; Liu, Hong et al.
Microstructure and tribological behavior of polymeric nanocomposites
Industrial Lubrication and Tribology. Bd. 53. H. 2. Emerald 2001 S. 72 - 77

Eisert, F.; Gurka, Martin; Legant, A. et al.
Detection of Molecular Alignment in Confined Films
Science. Bd. 287. H. 5452. American Association for the Advancement of Science (AAAS) 2000 S. 468 - 470

Rudolf, R.; Mitschang, Peter; Neitzel, M.
Induction heating of continuous carbon-fibre-reinforced thermoplastics
Composites Part A: Applied Science and Manufacturing. Bd. 31. H. 11. Elsevier B.V. 2000 S. 1191 - 1202

Breuer, Ulf; Ostgathe, M.; Neitzel, M.
Manufacturing of all-thermoplastic sandwich systems by a one-step forming technique
Polymer Composites. Bd. 19. H. 3. Wiley 1998 S. 275 - 279

Breuer, Ulf
Reinforcement of CFRP structures by tailored fibre placement
Polymers and Polymer Composites. Bd. 6. H. 8. 1998 S. 499 - 504

Breuer, Ulf Paul
Beitrag zur Umformtechnik gewebeverstärkter Thermoplaste
Düsseldorf: VDI-Verl. 1997 123 S. (Verein Deutscher Ingenieure: Fortschrittberichte VDI / Reihe 2, Fertigungstechnik ; Nr. 433)

Neitzel, Manfred; Breuer, Ulf
Die Verarbeitungstechnik der Faser-Kunststoff-Verbunde
München: Hanser 1997 191 S. (Studientexte Kunststofftechnik)

Mitschang, Peter; Sattler, Hans-Jürgen
Theoretische und experimentelle Untersuchungen zum Laufverhalten von Nähmaschinengreifern
Düsseldorf: VDI-Verl. 1990 97 S. (Verein Deutscher Ingenieure: Fortschrittberichte VDI / Reihe 1 / Konstruktionstechnik, Maschinenelemente ; Nr. 188)

Lemhus, D.; Hausmann, Joachim; von Hehl, Hohe, J. et al.
Materials
MDPI AG