Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) (RPTU in Kaiserslautern)
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau
- 0631/2017-0
Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
An anisotropic topology optimization procedure for continuous fiber reinforced polymer structures with biaxial fiber layout for improved intersection point designComposite Structures. Bd. 337. Elsevier BV 2024 S. 118064
Klingler, Andreas; Gilberg, Maurice; Reisinger, David et al.
Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysisPolymer Testing. Bd. 131. Elsevier 2024 108340
Klingler, Andreas; Reisinger, David; Schlögl, Sandra et al.
Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stabilityMacromolecules. Bd. 0. American Chemical Society (ACS) 2024 S. 1 - 8
Rehra, Jan
Beitrag zur Beschreibung des mechanischen Materialverhaltens von Metall-Faser-Hybrid-Verbund-Werkstoffen am Beispiel von stahl- und kohlenstofffaserverstärktem EpoxidharzKaiserslautern: Leibniz-Institut für Verbundwrkstoffe GmbH (IVW) 2023 169 S. (IVW-Schriftenreihe, Bd. 155)
Syerko, E.; Schmidt, T.; May, D. et al.
Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictionsComposites Part A: Applied Science and Manufacturing. Bd. 167. Elsevier B.V. 2023 107397
Salmins, Maximilian; Gortner, Florian; Mitschang, Peter
Challenges in Manufacturing of Hemp Fiber-Reinforced Organo Sheets with a Recycled PLA MatrixPolymers. Bd. 15. H. 22. MDPI 2023 4357
Lee, J.; Duhovic, M.; Allen, T. et al.
Computational modelling and analysis of transverse liquid composite moulding processesComposites Part A: Applied Science and Manufacturing. Bd. 167. Elsevier B.V. 2023 107433
Gebhard, Andreas
Creation of an information management system for tribology laboratories and its application to transfer film luminance analysisKaiserslautern: Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) 2023 153 S. (IVW Schriftenreihe, Bd. 154)
Seefeldt, Andressa; Dippold, Marcel; Gensel, Julia et al.
International Conference in Humans and Technology (ICHT). Direct printing of high-performance thermoplastic connection and stiffening elements by fused filament fabricationA Holistic and Symbiotic Approach to Sustainable Development. USA: AIP 2023
Pérez-Martín, Helena; Buchalik-Bopp, Stefan; Guettler, Barbara E. et al.
Effect of crystallinity and morphology on the mechanical properties of CF/PEKK composites manufactured under compression moulding and automated tape placementMaterials Today Communications. Bd. 36. Elsevier 2023 106442
Andriß, Christian; Kenf, Andreas; Schmeer, Sebastian
Experimental characterization and phenomenological modeling of nonlinear viscoelasticity, plasticity and damage of continuous carbon fiber-reinforced thermoplasticsComposites Part B: Engineering. Bd. 259. Elsevier B.V. 2023 110734
Hausmann, Joachim; Schmidt, Stefan; Esha, Leibniz-Institut
Improved Mean Value‐Amplitude Method for Determination of Orientation‐Dependent Modulus of Short Fiber‐Reinforced ThermoplasticsAdvanced Engineering Materials. Bd. 2023. Wiley 2023 S. 1 - 5
Ferreres, Guillem; Pérez-Rafael, Sílvia; Morena, Angela G. et al.
Influence of Enzymatically Hydrophobized Hemp Protein on Morphology and Mechanical Properties of Bio-Based Polyurethane and Epoxy FoamsPolymers. Bd. 15. H. 17. MDPI 2023 3608
Jungbluth, Julia; Bruns, Stefan; Schmidt, Catarina et al.
Interface failure analysis of embedded NiTi SMA wires using in situ high-resolution X-ray synchrotron tomographyMaterials Characterization. Bd. 205. Elsevier B.V. 2023 113345
Salmins, Maximilian; Mitschang, Peter
Investigation of an optimized hot press process design for manufacturing structural polyethersulfone foamsAdvanced Manufacturing: Polymer & Composites Science. Bd. 9. H. 1. Informa UK Limited 2023 S. 1 - 25
Detzel, Martin; Mitschang, Peter; Breuer, Ulf
New Approach for Processing Recycled Carbon Staple Fiber Yarns into Unidirectionally Reinforced Recycled Carbon Staple Fiber TapePolymers. Bd. 15. H. 23. MDPI 2023 S. 4575
Vyshnevsky, Dmitry G.; Ovdenko, Valeriia N.; Pavlov, Valeriy A. et al.
New substituted pentazadienes as initiators of free-radical polymerization: Synthesis, photochemical properties and perspectives for holographic mediaJournal of Macromolecular Science, Part A. Bd. 60. H. 10. Informa UK Limited 2023 S. 717 - 729
Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
Placement defects in thermoset‐impregnated rovings deposited along curved pathsPolymer Composites. Bd. 2023. Wiley 2023 S. 1 - 12
Schommer, D.; Duhovic, M.; Hoffmann, T. et al.
Polarization imaging for surface fiber orientation measurements of carbon fiber sheet molding compoundsComposites Communications. Bd. 37. Elsevier B.V. 2023 101456
Lin, Yusong; He, Ren; Xu, Yongkun et al.
Significance of nickel particles on reducing friction and wear of polyimide subjected to harsh boundary lubrication conditionsTribology International. Bd. 178. H. A. Elsevier B.V. 2023 108063
Janzen, Jan Ph.; May, David
Solid epoxy prepregs with patterned resin distribution: Influence of pattern and process parameters on part quality in vacuum‐bag‐only processingPolymer Composites. Bd. 2023. Wiley 2023 S. 1 - 15
Weber, Julian; Schlimbach, Jens
Stamp forming of partially consolidated CF/PEEK tape preforms produced in a high-speed automated tape laying processPolymers and Polymer Composites. Bd. 31. Sage 2023 96739112311680
Krause, K.; Hartbauer, M.; Neumeyer, T. et al.
Structure-property-relationships for Lightweight Parts Produced via Co-injection Molding and Foam Injection MoldingZeitschrift Kunststofftechnik. Bd. 1. Carl Hanser 2023 S. 27 - 51
Ovdenko, Valeriia; Vyshnevsky, Dmitry; Davidenko, Nikolay et al.
Synthesis, characterization, spectral properties and evaluation of the photophysical behavior of novel Congo Red based polymersOptical Materials. Bd. 135. Elsevier B.V. 2023 113268
Romanenko, V.; Duhovic, M.; Schommer, D. et al.
Advanced process simulation of compression molded carbon fiber sheet molding compound (C-SMC) parts in automotive series applicationsComposites Part A: Applied Science and Manufacturing. Bd. 157. Elsevier B.V. 2022 106924
Kaiser, Max; Gurka, Martin; Kunzler, Manuel
Airfoil trailing edge morphing based on modified SMAHC concept. Design, implementation, and experimental studiesActive and Passive Smart Structures and Integrated Systems XVI. Long Beach, California: SPIE. Digital Library 2022 120430Z
Salmins, Maximilian; Mitschang, Peter
Bending properties of structural foams manufactured in a hot press processAdvanced Manufacturing: Polymer & Composites Science. Bd. published online. Informa UK Limited 2022 S. 1 - 17
Donhauser, Tobias; Kenf, Andreas; Schmeer, Sebastian et al.
Calculation of highly stressed components made of carbonfiber-reinforced polyamide-6Composite Structures. Bd. 280. Elsevier B.V. 2022 S. 114830
Andriß, Christian; Kenf, Andreas; Donhauser, Tobias et al.
Characterization and modeling of continuous carbon fiber-reinforced polycarbonate under multiaxial loadsComposites Part B: Engineering. Bd. 235. Elsevier B.V. 2022 109740
Baumann, Andreas; May, David; Hausmann, Joachim
Characterization of metallic bushings in RTM-made composites by in-situ leak detection under mechanical loadingComposites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 S. 100226
Rehra, Jan; Andriß, Christian; Schmeer, Sebastian et al.
Describing the Material Behavior of Steel and Carbon Fiber Reinforced Composites Using a Combined Damage-Plasticity ApproachJournal of Composites Science: Multifunctional Composite Structures. Bd. 6. H. 8. MDPI AG 2022 S. 235
Kunzler, Manuel; Kaiser, Max; Fischer, Simon et al.
Design, construction and simulation of a shape memory alloy based morphing airfoil demonstrator based on the agonist-antagonist principleSociety of Photo-Optical Instrumentation Engineers (Hrsg). Active and Passive Smart Structures and Integrated Systems XVI. Long Beach, California, USA: SPIE. Digitl Library 2022 1204310
Rief, Thomas; Motsch-Eichmann, Nicole; May, David et al.
Development of a New Method for Manufacturing Hollow Fibre-Reinforced Plastic Structures for Aeronautical Applications Using Structural CFRP CoresPlastics, Rubber and Composites. Bd. 51. H. 8. Informa UK Limited 2022 S. 407 - 417
Esha, Esha; Hausmann, Joachim
Development of an Analytical Model to Predict Stress–Strain Curves of Short Fiber-Reinforced Polymers with Six Independent ParametersJournal of Composites Science. Bd. 6. H. 5. MDPI AG 2022 140
Semar, Jan E.; May, David; Mitschang, Peter
Evaluation of different bonding strategies for glass fibre-reinforced epoxy resin with embedded elastomer layersPlastics, Rubber and Composites: Macromolecular Engineering. Bd. 51. H. 8. Informa UK Limited 2022 S. 454 - 461
Zhu, Ping; Brückner, Alexander; Neumeyer, Thomas et al.
Fatigue Characteristics of Poly(ether-b-amide) Elastomers during Cyclic Dynamic Tests and the Underlying Microstructural EvolutionIndustrial & Engineering Chemistry Research. Bd. 61. H. 40. American Chemical Society (ACS) 2022 S. 14760 - 14771
Gebhard, Andreas; Jim, Bai Cheng
Formation, stability and degradation of transfer films formed by polyphenylene sulfide (PPS) and its composites in dry sliding against steelWear. Bd. 500-501. Elsevier BV 2022 204343
Bauer, Philipp; Motsch-Eichmann, Nicole; Schmeer, Sebastian et al.
Hybrid Thermoset-Thermoplastic Structures: An in-depth study on plasma pretreated continuous fiber-reinforced epoxy specimensComposites Part C: Open Access. Bd. 8. Elsevier BV 2022 100281
Popow, Vitalij; Vogtmann, Julia; Gurka, Martin
In-situ characterization of impact damage in carbon fibre reinforced polymers using infrared thermographyInfrared Physics & Technology. Bd. 122. Elsevier B.V. 2022 104074
Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Influence of Fungal Decay on Mechanical Properties of Bio-based Sheet Molding Compounds (SMC)Polymers and Polymer Composites. Bd. 30. SAGE 2022 S. 1 - 11
Becker, Stephan; Michel, Marc; Mitschang, Peter et al.
Influence of polymer matrix on the induction heating behavior of CFRPC laminatesComposites Part B: Engineering. Bd. 231. Elsevier B.V. 2022 S. 109561
Krummenacker, Janna
Investigations on the high cycle fatigue strength of short glass fiber reinforced polyamide 66Kaiserslautern. 2022 127 S.
Weidmann, Stefan; Volk, Petra; Mitschang, Peter et al.
Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer compositesComposites Part A: Applied Science and Manufacturing. Bd. 154. Elsevier B.V. 2022 S. 106791
Klingler, Andreas; He, Qinghao; Wetzel, Bernd et al.
Low velocity impact resistance of thin and toughened carbon fibre reinforced epoxyComposites Science and Technology. Bd. 2022. Elsevier B.V. 2022 109362
Cassola, Stefano; Duhovic, Miro; Schmidt, Tim et al.
Machine learning for polymer composites process simulation: A reviewComposites Part B: Engineering. Bd. 246. Elsevier B.V. 2022 110208
Hausmann, Joachim; ., Esha; Schmidt, Stefan et al.
Mean Value-Amplitude Method for the Determination of Anisotropic Mechanical Properties of Short Fiber Reinforced ThermoplasticsJournal of Composites Science. Bd. 6. H. 6. MDPI AG 2022 179
Grzesiak, Szymon; Pahn, Matthias; Klingler, Andreas et al.
Mechanical and Thermal Properties of Basalt Fibre Reinforced Polymer Lamellas for Renovation of Concrete StructuresPolymers. Bd. 14. H. 4. MDPI AG 2022 790
Khatri, Bilal; Rehra, Jan; Schmeer, Sebastian et al.
Metal/Carbon-Fiber Hybrid Composites—Damage Evolution and Monitoring of Isothermal Fatigue at Low and Elevated TemperaturesJournal of Composites Science. Bd. 6. H. 3. MDPI AG 2022 67
Klingler, A.; Gilberg, M.; Krüger, J.-K. et al.
On volume changes during homopolymerization of polymer networks accessed via “Temperature modulated optical refractometry”Thermochimica Acta. Bd. 711. Elsevier B.V. 2022 179185
Becker, S.; Mitschang, P.
Process Improvement of Continuous Induction Welding of Carbon Fiber-Reinforced Polymer CompositesJournal of Materials Engineering and Performance. Bd. 2022. Springer Science and Business Media LLC 2022 S. 1
May, David
Prozessentwicklung für Faser-Kunststoff-Verbunde: Studien zu Verarbeitungseigenschaften von Halbzeugen als Basis einer ganzheitlichen ForschungsmethodikKaiserslautern: Leibniz-Institut für Verbundwerkstoffe GmbH 2022 375 S. (IVW-Schriftenreihe (148))
Willenbacher, Bjoern; May, David; Mitschang, Peter
Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressureAdvanced Manufacturing: Polymer & Composites Science. Bd. 2022. Informa UK Limited 2022 S. 1 - 5
Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Simultaneous access to different types of volume changes and the degree of cure during isothermal polymerization of polymer networksExpress Polymer Letters. Bd. 16. H. 11. Budapest: University of Technology and Economics, Faculty of Mechanical Engineering, Department of Polymer Engineering; Scientific Society of Mechanical Engineering 2022 S. 1193 - 1207
Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
Structural topology optimization and path planning for composites manufactured by fiber placement technologiesComposite Structures. Bd. 289. Elsevier B.V. 2022 115488
Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Temperature-rate induced polymerization and phase separation of block copolymer toughened polymer compositesComposites Science and Technology. Bd. in Press. Elsevier B.V. 2022 109329
Lee, Jeeeun; Duhovic, Miro; Allen, Tom et al.
Transverse liquid composite moulding processes for advanced composites material manufacturingPlastics, Rubber and Composites. Bd. 51. H. 8. Informa UK Limited 2022 S. 373 - 382
Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Use of bio-based and renewable materials for sheet molding compounds (SMC) – Mechanical properties and susceptibility to fungal decayComposites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 100242
Vogtmann, Julia; Klingler, Andreas; Rief, Thomas et al.
3D X-ray Microscopy as a Tool for in Depth Analysis of the Interfacial Interaction between a Single Carbon Fiber and an Epoxy Matrix after Mechanical LoadingJournal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 121
Schmidt, Tim; May, David; Duhovic, Miro et al.
A combined experimental–numerical approach for permeability characterization of engineering textilesPolymer Composites. Bd. 42. H. 7. Wiley 2021 S. 3363 - 3379
Arrabiyeh, Peter A.; May, David; Eckrich, Maximilian et al.
An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resinPolymer Composites. Bd. 42. H. 11. Wiley 2021 S. 5630 - 5655
Gryshchuk, Liudmyla; Grishchuk, Sergiy; Kote, E. et al.
Bio-based soft polyurethane foams filled with coffee wasteInternational Research and Practice Conference "Nanotechnology and Nanomaterials" (NANO 2021): Abstract book. Lviv: LLC 2021 0
Gortner, Florian; Mitschang, Peter; Ooms, Peter et al.
Bio-basierte und nachwachsende Rohstoffe eröffnen neue Anwendungsmöglichkeiten für gewichtsoptimierte duroplastische Werkstoffe im KFZ- und NFZ-BereichBerns, Karsten; Dressler, Klaus; Kalmar, Ralf; Stephan, Nicole; Teutsch, Reusch; Thul, Martin (Hrsg). Commercial Vehicle Technology 2020/2021: Proceedings. Wiesbaden: Springer Vieweg 2021 S. 264 - 278
Coccia, Francesca; Gryshchuk, Liudmyla; Moimare, Pierluigi et al.
Chemically Functionalized Cellulose Nanocrystals as Reactive Filler in Bio-Based Polyurethane FoamsPolymers. Bd. 13. H. 15. MDPI AG 2021 2556
Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Composite technology: Prepregs and monolithic part fabrication technologies2. Aufl. Munich: Hanser 2021 245 S.
May, David; Mitschang, Peter
Concept for Darcy-based viscosity measurement for fast-curing resin systemsComposites Communications. Bd. 27. Elsevier B.V. 2021 S. 100881
Rosnitschek, Tobias; Seefeldt, Andressa; Alber-Laukant, Bettina et al.
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel ComponentsMaterials. Bd. 14. H. 18. MDPI 2021 5173
Krummenacker, Janna; Hausmann, Joachim
Determination of Fatigue Damage Initiation in Short Fiber-Reinforced Thermoplastic through Acoustic Emission AnalysisJournal of Composites Science. Bd. 5. H. 8. MDPI AG 2021 221
Akpan, Emmanuel Isaac; Wetzel, Bernd; Friedrich, Klaus
Eco-friendly and sustainable processing of wood-based materialsGreen Chemistry. Bd. 23. H. 6. Royal Society of Chemistry (RSC) 2021 S. 2198 - 2232
Gapeeva, Anna; Vogtmann, Julia; Zeller-Plumhoff, Berit et al.
Electrochemical Surface Structuring for Strong SMA Wire–Polymer Interface AdhesionACS Applied Materials & Interfaces. Bd. 13. H. 18. American Chemical Society (ACS) 2021 S. 21924 - 21935
Almazán-Lázaro, Juan-Antonio; López-Alba, Elías; Schmeer, Sebastian et al.
Enhanced Low-Velocity Impact Properties for Resin Film Infusion-Manufactured Composites by Flow-Control ApproachPolymers. Bd. 13. H. 19. MDPI AG 2021 3431
Adler, Sonja E.; Güttler, Barbara E.; Bendler, Lubov et al.
Evaluation of recycled carbon fibre/epoxy composites: Thermal degradation behaviour of pyrolysed and virgin carbon fibres using thermogravimetric analysisAdvanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 82 - 92
Baumann, Andreas; Hausmann, Joachim
Experimental Investigation of Instabilities on Different Scales in Compressive Fatigue Testing of CompositesJournal of Composites Science. Bd. 5. H. 4. MDPI AG 2021 S. 114
Motsch-Eichmann, Nicole; Rieger, Florian; Rief, Thomas et al.
Experimental investigation of modified co-curing process for carbon fiber/epoxy-laminatesJournal of Micromechanics and Molecular Physics. Bd. 06. H. 03. World Scientific Pub Co Pte Ltd 2021 S. 1 - 12
Hausmann, Joachim; Krummenacker, Janna; Klingler, Andreas et al.
Improvement of fatigue strength of carbon fiber reinforced polymers by matrix modifications for ultrafast rotating flywheelsViehweger, C. u. a. (Hrsg). Frontiers of Science and Technology. Berlin: De Gruyter 2021 S. 279 - 289
Piott, Florian; Krämer, Andreas; Lück, André et al.
Increasing the performance of continuous compression moulding by local pressure adaptionAdvanced Manufacturing: Polymer & Composites Science. Bd. 7. H. 1. Informa UK Limited 2021 S. 1 - 14
Weinbrenner, Marius; Weber, Regino; Neumeyer, Thomas et al.
Influence of foam density on burning behavior of polymer bead foamsJournal of Applied Polymer Science. Bd. 139. H. 4. Wiley 2021 51558
May, David
Integrated Product Development with Fiber-Reinforced PolymersCham: Springer International Publishing 2021 (Engineering Materials)
Klingler, Andreas
Morphology and fracture of block copolymer and core-shell rubber particle modified epoxies and their carbon fibre reinforced compositesKaiserslautern: Leibniz-Institut für Verbundstoffe 2021 161 S.
May, D.; Goergen, C.; Friedrich, K.
Multifunctionality of polymer composites based on recycled carbon fibers: A reviewAdvanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 70 - 81
Friedrich, Klaus; Akpan, E. I.; Wetzel, Bernd
On the Tribological Properties of Extremely Different Wood MaterialsEuropean Journal of Wood and Wood Products. Bd. 79. H. 4. Springer 2021 S. 977 - 988
Friedrich, K.; Akpan, E. I.; Wetzel, B.
On the tribological properties of extremely different wood materialsEuropean Journal of Wood and Wood Products. Bd. 79. H. 4. Springer Science and Business Media LLC 2021 S. 977 - 988
Yong, A.X.H.; Aktas, A.; May, D. et al.
Out-of-plane permeability measurement for reinforcement textiles : A benchmark exerciseComposites Part A : Applied Science and Manufacturing. Bd. 148. Elsevier Ltd. 2021 S. 106480
Gebhard, Andreas; Jim, Bai Cheng
Photo-optical luminance analysis of transfer films: Measurement principle, data analysis and result plottingTribology International. Bd. 153. Elsevier Ltd. 2021 S. 106626
Akpan, Emmanuel; Friedrich, Klaus; Jacob, Stefan et al.
Reactive Layer Assembly Sustains an Interlocked Structure in Green Processed and Scalable High-Performance Layered WoodACS Sustainable Chemistry & Engineering. Bd. 9. H. 47. American Chemical Society (ACS) 2021 15744
Mehl, Konstantin; Schmeer, Sebastian; Motsch-Eichmann, Nicole et al.
Structural Optimization of Locally Continuous Fiber-Reinforcements for Short Fiber-Reinforced PlasticsJournal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 S. 118
Mrzljak, Selim; Schmidt, Stefan; Kohl, Andreas et al.
Testing Procedure for Fatigue Characterization of Steel-CFRP Hybrid Laminate Considering Material Dependent Self-HeatingMaterials. Bd. 14. H. 12. MDPI AG 2021 S. 3394
Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart et al.
A comparative analysis of ceramic and cemented carbide end millsProduction Engineering. Bd. 14. H. 3. Springer LLC 2020 S. 355 - 364
Setti, Dinesh; Arrabiyeh, Peter A.; Kirsch, Benjamin et al.
Analytical and experimental investigations on the mechanisms of surface generation in micro grindingInternational Journal of Machine Tools and Manufacture. Bd. 149. Elsevier B.V. 2020 103489
Donhauser, Tobias
Beitrag zur Auslegung hochbeanspruchter Bauteile aus Faser-Thermoplast-VerbundenKaiserslautern: Institut für Verbundwerkstoffe GmbH 2020 131 S.
Baumann, Andreas; Hausmann, Joachim
Compression Fatigue Testing Setups for Composites—A ReviewAdvanced Engineering Materials. Bd. 23. H. 2. Wiley 2020 S. 2000646
Walter, Rolf; Selzer, Ralf; Gurka, Martin et al.
Effect of filament quality, structure, and processing parameters on the properties of fused filament fabricated short fiber-reinforced thermoplasticsStructure and Properties of Additive Manufactured Polymer Components. Amsterdam: Elsevier 2020 S. 253 - 302
Finck, David; Seidel, Christian; Ostermeier, Anika et al.
Experimental Investigation on the In-Plane Creep Behavior of a Carbon-Fiber Sheet Molding Compound at Elevated Temperature at Different Stress StatesMaterials. Bd. 13. H. 11. MDPI AG 2020 S. 2545
Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Faserverbundwerkstoffe: Prepregs und ihre Verarbeitung2. Aufl. München: Hanser 2020 288 S.
Popow, Vitalij; Gurka, Martin
Full factorial analysis of the accuracy of automated quantification of hidden defects in an anisotropic carbon fibre reinforced composite shell using pulse phase thermographyNDT & E International. Bd. 116. Elsevier Ltd. 2020 S. 102359
Bajpai, Ankur; Wetzel, Bernd; Friedrich, Klaus
High strength epoxy system modified with soft block copolymer and stiff core-shell rubber nanoparticles: Morphology, mechanical properties, and fracture mechanismsExpress Polymer Letters. Bd. 14. H. 4. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2020 S. 384 - 399
Becker, Yves Nicolas; Motsch, Nicole; Hausmann, Joachim et al.
Hybrid composite pedicle screw - finite element modelling with parametric optimizationInformatics in Medicine Unlocked. Bd. 18. Elsevier B.V. 2020 S. 100290 100290
Bauer, Philipp; Becker, Yves N.; Motsch-Eichmann, Nicole et al.
Hybrid thermoset-thermoplastic structures: An experimental investigation on the interface strength of continuous fiber-reinforced epoxy and short-fiber reinforced polyamide 6Composites Part C: Open Access. Bd. 3. Elsevier B.V. 2020 S. 100060
Kopietz, Mark; Friedrich, Klaus; Wetzel, Bernd
In situ functionalisation of organomineral hybrid resins for tough basalt fibre reinforced plasticsPlastics, Rubber and Composites. Bd. 50. H. 3. Informa UK Limited 2020 S. 105 - 115
Santos, Alberto L.; Nakazato, Roberto Z.; Schmeer, Sebastian et al.
Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminateComposites Part B: Engineering. Bd. 184. Elsevier Ltd. 2020 S. 107718
Kelkel, Benjamin; Popow, Vitalij; Gurka, Martin
Inline quantification and localization of transverse matrix cracking in cross-ply CFRP during quasi-static tensile testing by a joint event-based evaluation of acoustic emission and passive IR thermographyComposites Science and Technology. Bd. 190. Elsevier B.V. 2020 S. 108013