Prof. Priv. Doz. Dr.-Ing. habil. Peter Starke
Fachbereich Angewandte Ingenieurwissenschaften, Hochschule Kaiserslautern
0000-0002-8033-0602
Weber, Fabian; Maul, Moritz; Juner, Florian et al.
A nonlinear lifetime prediction method for un‐ and low alloyed steels by damage determination based on non‐destructive measurement techniquesFatigue & Fracture of Engineering Materials & Structures. Bd. 0. Wiley 2024 S. 1 - 18
Weber, Fabian; Wu, Haoran; Starke, Peter
A new short-time procedure for fatigue life evaluation based on the linear damage accumulation by Palmgren–MinerInternational Journal of Fatigue. Bd. 172. Elsevier B.V. 2023 107653
Heckmann, Klaus; Acosta, Ruth; Bill, Tobias et al.
Detection of fatigue degradation in austenitic stainless steel with eddy current probe and machine learningJournal of Materials Research and Technology. Bd. 27. Elsevier B.V. 2023 S. 7336 - 7346
Donnerbauer, Kai; Bill, Tobias; Starke, Peter et al.
Fatigue life evaluation of metastable austenitic stainless steel AISI 347 based on nondestructive testing methods for different environmental conditionsInternational Journal of Fatigue. Bd. 1. Elsevier B.V. 2023 108056
Weber, Fabian; Koziol, Janina; Starke, Peter
StressLife: A Short-Time Approach for the Determination of a Trend S-N Curve in and beyond the HCF Regime for the Steels 20MnMoNi5-5 and SAE 1045Materials. Bd. 16. H. 11. MDPI 2023 3914
Teng, Zhenjie; Wu, H.; Pramanik, S. et al.
Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steelAdvanced Engineering Materials. Bd. 1. Wiley 2022 S. 1
Wu, Haoran; Raghuraman, Srinivasa R.; Ziman, Jonas A. et al.
Characterization of the Fatigue Behaviour of Low Carbon Steels by Means of Temperature and Micromagnetic MeasurementsMetals. Bd. 12. H. 11. MDPI 2022 1838
Theis, Martin; Bill, Tobias; Knoll, Heiko et al.
Electrochemical Deposition of CoP and CoNiP as Hard Magnetic Scales in a Position Measurement SystemMetals. Bd. 12. H. 2. MDPI AG 2022 S. 235
Schaefer, Florian; Rosar, Jan; Wu, Haoran et al.
Obtaining a lower estimate of the fatigue limit of metals by a simplified quantitative thermometric approach in a low-cost one-specimen testInternational Journal of Fatigue. Bd. 159. Elsevier BV 2022 106729
Schäfer, Florian; Rosar, Jan; Marx, Michael et al.
Quantitative Thermometry: A Revived Simplified Approach to Fatigue Strength Determination and Deformation MechanismsProcedia Structural Integrity. Bd. 37. Elsevier B.V. 2022 S. 299 - 306
Wu, Haoran; Ziman, Jonas A.; Raghuraman, Srinivasa R. et al.
Short-Time Fatigue Life Estimation for Heat Treated Low Carbon Steels by Applying Electrical Resistance and Magnetic Barkhausen NoiseMaterials. Bd. 16. H. 1. MDPI 2022 S. 32
Hoffmann, Joachim E.; Pawar, Vrushali; Eifler, Dietmar et al.
Surface states by grinding thin strips of electrochemically deposited nanocrystalline nickel-ironMaterials Testing. Bd. 64. H. 7. Walter de Gruyter GmbH 2022 S. 903 - 931
Bill, Tobias; Acosta, Ruth; Boller, Christian et al.
A Short-Time Approach for Fatigue Life Evaluation of AISI 347 Steel for Nuclear Power Energy ApplicationsApplied Sciences. Bd. 11. H. 23. MDPI AG 2021 11405
Heckmann, Klaus; Sievers, Jürgen; Schopf, Tim et al.
Correlation of load drop and crack initiation criteria in fatigue life experiments of metallic materialsEngineering Fracture Mechanics. Bd. 251. Elsevier B.V. 2021 107785
Teng, Zhenjie; Wu, Haoran; Huang, Zhiyong et al.
Effect of mean stress in very high cycle fretting fatigue of a bearing steelInternational Journal of Fatigue. Bd. 149. Elsevier B.V. 2021 106262
Lyamkin, Viktor; Pauly, Christoph; Starke, Peter et al.
Impact of cyclic strain on deformation-induced martensite morphology and magnetic properties of type 347 austenitic stainless steelMaterials Today Communications. Bd. 26. Elsevier B.V. 2021 101803
Acosta, Ruth; Heckmann, Klaus; Sievers, Jürgen et al.
Microstructure-Based Lifetime Assessment of Austenitic Steel AISI 347 in View of Fatigue, Environmental Conditions and NDTApplied Sciences. Bd. 11. H. 23. MDPI AG 2021 11214
Aeran, Ashish; Acosta, Ruth; Siriwardane, Sudath C. et al.
A nonlinear fatigue damage model: Comparison with experimental damage evolution of S355 (SAE 1020) structural steel and application to offshore jacket structuresInternational Journal of Fatigue. Bd. 135. Elsevier Ltd. 2020 S. 105568
Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
A unified fatigue life calculation based on intrinsic thermal dissipation and microplasticity evolutionInternational Journal of Fatigue. Bd. 131. Elsevier B.V. 2020 S. 105370
Wu, H.; Bill, T.; Teng, Z.J. et al.
Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigationsMaterials Science and Engineering: A. Bd. 6. Elsevier B.V. 2020 S. 139597
Starke, Peter; Acosta, Ruth; Bill, Tobias et al.
Evaluation of Influences of Materials Processing on the Fatigue Life of Quenched and Tempered SAE 4140Fourth International Conference on Material and Component Performance under Variable Amplitude Loading (VAL4). Darmstadt. 2020
Tenkamp, Jochen; Awd, Mustafa; Siddique, Shafaqat et al.
Fracture–Mechanical Assessment of the Effect of Defects on the Fatigue Lifetime and Limit in Cast and Additively Manufactured Aluminum–Silicon Alloys from HCF to VHCF RegimeMetals. Bd. 10. H. 7. MDPI AG 2020 943
Lyamkin, Viktor; Starke, Peter; Boller, Christian
Magnetic force imaging for spatially resolved assessment of ferromagnetic phase fraction in austenitic stainless steelJournal of Magnetism and Magnetic Materials. Bd. 497. Elsevier BV 2020 S. 165973
Hoffmann, Joachim E.; Schmitt, Martin-T.; Eifler, Dietmar et al.
Mechanical behavior of annealed electrochemically deposited nanocrystalline nickel-iron alloysMaterials Testing. Bd. 62. H. 3. Walter de Gruyter GmbH 2020 S. 225 - 241
Starke, P.; Baak, N.; Nickel, J. et al.
Qualification of an inner surface Barkhausen noise sensor for residual stress measurements of single-lip deep drilled AISI 4140 by means of X-ray diffraction13th International Conference on Barkhausen Noise and Micromagnetic Testing. Prag. 2020 S. 1 - 8
Acosta, Ruth; Wu, Haoran; Sridaran Venkat, Ramanan et al.
SteBLife, a New Approach for the Accelerated Generation of Metallic Materials’ Fatigue DataMetals. Bd. 10. H. 6. Basel: MDPI AG 2020 S. 798
Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
Thermodynamic entropy as a marker of high‐cycle fatigue damage accumulation: Example for normalized SAE 1045 steelFatigue & Fracture of Engineering Materials & Structures. Bd. 43. H. 12. John Wiley & Sons Ltd 2020 S. 2854 - 2866
Starke, Peter
Bewertung des Ermüdungsverhaltens zyklisch beanspruchter Werkstoffe mittels thermometrischer und elektrischer MessgrößenNeu-Ulm: Proceedings Tagung Werkstoffprüfung 2019 S. 13 - 22
Maci, F.; Jamrozy, M.; Acosta, R. et al.
Characterization of the Fatigue Behavior of Mechanical and Thermal Aged Austenitic Power Plant Steel AISI 347Correia, José A.F.O. ; De Jesus, Abílio M.P. ; Fernandes, António Augusto ; Calçada, Rui (Hrsg). Mechanical Fatigue of Metals : Experimental and Simulation Perspectives. Cham: Springer International Publishing 2019 S. 65 - 71 (Structural Integrity)
Teng, Zhenjie; Liu, Hanqing; Wang, Qingyuan et al.
Fretting behaviors of a steel up to very high cycle fatigueWear. Bd. 438-439. Elsevier B.V. 2019 S. 203078
Weber, Fabian; Acosta, Ruth; Eyrisch, Tina et al.
Influence of processing parameters on the fatigue life time of specimens made from quenched and tempered steel SAE 4140HMaterials Testing. Bd. 61. H. 9. Carl Hanser Verlag 2019 S. 842 - 850
Acosta, Ruth; Boller, Christian; Starke, Peter et al.
Non-destructive testing derived parameters for microstructure-based residual service life assessment of aging metallic materials in nuclear engineeringMaterials Testing. Bd. 61. H. 11. Carl Hanser Verlag 2019 S. 1029 - 1038
Wu, Haoran; Bäumchen, Alexander; Engel, Alexander et al.
SteBLife – A new short-time procedure for the evaluation of fatigue dataInternational Journal of Fatigue. Bd. 124. Elsevier B.V. 2019 S. 82 - 88
Starke, Peter
StressLifetc – NDT-related assessment of the fatigue life of metallic materialsMaterials Testing. Bd. 61. H. 4. Carl Hanser Verlag 2019 S. 297 - 303
Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
Thermography in high cycle fatigue short‐term evaluation procedures applied to a medium carbon steelFatigue & Fracture of Engineering Materials & Structures. Bd. 43. H. 3. Wiley 2019 S. 515 - 526
Starke, Peter; Wu, Haoran; Boller, Christian
Accelerated fatigue data evaluation for aircraft validation activities7th International Symposium on Aircraft Materials At: Compiègne (France). 2018 S. 601 - 612
Venkat, R. S.; Starke, P.; Boller, Christian
Acoustics based assessment of a composite material under very high cycle fatigue loadingChrist, Hans-Jürgen (Hrsg). Fatigue of materials at very high numbers of loading cycles : experimental techniques, mechanisms, modeling and fatigue life assessment. Wiesbaden: Springer Spektrum 2018 S. 463 - 485 (Research)
Wu, H.; Starke, P.; Boller, C.
Characterization of the fatigue behaviour and lifetime evaluation of metallic materials based on thermographic NDT-methodsProceedings of the 2018 International Conference on Quantitative InfraRed Thermography. Berlin: QIRT Council 2018
Starke, Peter; Lymakin, Viktor; Boller, Christian
Cyclic indentation as an alternative to classic fatigue evaluation7th International Symposium on Aircraft MaterialsAt: Compiègne, France. 2018 S. 595 - 601
Starke, Peter; Eifler, Dietmar; Walther, Frank
Model-based correlation between electrical resistance and the dislocation structure of fatigued ICE R7 wheel steelMaterials Testing. Bd. 60. H. 7-8. De Gruyter 2018 S. 669 - 676
Starke, P.; Acosta, A.; Boller, C. et al.
Nutzung zerstörungsfreier Prüfverfahren zur mikrostrukturbasierten Restlebensdauerbewertung alternder metallischer Werkstoffe und Komponenten in der EnergietechnikLeipzig. 2018 S. 1 - 12
Starke, Peter; Schopf, Tim; Walther, Frank et al.
Quantitative Bewertung des Ermüdungs- und Schädigungsstadiums des in Kraftwerken eingesetzten Stahls X6CrNiNb18-10 anhand zerstörungsfreier PrüfverfahrenBad Neuenahr. 2018
Starke, Peter; Bäumchen, Alexander; Wu, Haoran
SteBLife – A new short-time procedure for the calculation of S-N curves and failure probabilitiesMaterials Testing. Bd. 60. H. 2. Carl Hanser Verlag 2018 S. 121 - 127
Starke, Peter; Wu, Haoran; Boller, Christian
SteBLife – The enhanced short-time evaluation procedure for materials fatigue data generation, Materials Science Forum 941Materials Science Forum. Bd. 941. 2018 S. 2395 - 2400
Heckmann, Klaus; Sievers, Jürgen; Schopf, Tim et al.
StrainLife: Efficient Fatigue Life Data Generation for an Enhanced Ageing Assessment of Metallic ComponentsMaterials and Fabrication. Bd. 6B. Proceedings of the ASME 2018 Pressure Vessels and Piping Conference: American Society of Mechanical Engineers 2018
Starke, Peter; Acosta, Ruth; Boller, Christian et al.
StrainLife: Lebensdauerberechnung metallischer Werkstoffe und Komponenten der Energietechnik auf der Basis zerstörungsfreier PrüfverfahrenBad Neuenahr. 2018
Starke, P.; Wu, H.
Use of non-destructive testing methods in a new one-specimen test strategy for the estimation of fatigue dataInternational Journal of Fatigue. Bd. 111. Elsevier Ltd. 2018 S. 177 - 185
Starke, P.; Seiler, G.; Boller, C.
Elektromagnetische On-line-Prüfung stromdurchfluteter Werkstoffproben aus austenitischem Stahl unter ErmüdungsbeanspruchungDGZFP Jahrestagung, Koblenz/Germany. 2017 S. 1 - 6
Starke, P.; Boller, C.; Mueller, B. R. et al.
Nonlinearities based inverse approach for the characterisation of the damage evaluation process in very high cycle fatigued CFRP specimensThe Seventh International Conference on Very High Cycle Fatigue - VHCF7. 2017 S. 1 - 8
Starke, Peter; Boller, Christian
Zerstörungsfreie Prüfung zur effizienteren Ermittlung von WerkstoffwöhlerlinienDGZfP Jahrestagung. 2017 S. 1 - 6