Prof. Priv. Doz. Dr.-Ing. habil. Peter Starke - Publikationen

Weber, Fabian; Wagner, Aline; Koziol, Janina et al.
Consideration of Statistical Approaches Within the Accelerated Assessment of Fatigue Properties of Metallic Materials
Metals. Bd. 15. H. 2. MDPI AG 2025 S. 191

Skarlatos, Anastassios; Boller, Christian; Lyamkin, Viktor et al.
Continuous eddy-current monitoring of fatigue degradation in an unnotched steel specimen
International Journal of Applied Electromagnetics and Mechanics. H. OnlineFirst. SAGE Publications 2025

Sauer, Lukas M.; Otto, Johannes L.; Lingnau, Lars A. et al.
Electrical resistance-based fatigue damage assessment of steels
Procedia Structural Integrity. Bd. 68. Elsevier BV 2025 S. 432 - 438

Ziman, Jonas A.; Weber, Fabian; Koziol, Janina et al.
Evaluation of Frequency Effects on Fatigue Life at High Test Frequencies for SAE 1045 Steel Based on Thermography and Electrical Resistance Measurements
Applied Sciences. Bd. 15. H. 3. MDPI AG 2025 1022

Raghuraman, S. R.; Shrivastava, A.; Weber, F. et al.
Evaluation of surface and volume damages under HCF and VHCF loading for quenched and tempered steels
Procedia Structural Integrity. Bd. 68. Elsevier BV 2025 S. 769 - 775

Raghuraman, Srinivasa Raghavan; Ziman, Jonas Anton; Weber, Fabian et al.
Fatigue Assessment of Quenched and Tempered Steels Based on Temperature and Micro-Magnetic Measurements
Research and Review Journal of Nondestructive Testing. Bd. 30. H. 11. NDT.net 2025

Shrivastava, Ayush; Gulbay, Oguz; Raghuraman, Srinivasa Raghavan et al.
Increasing the Reuse Potential of High‐Strength Steels by Extending the Fatigue Life through Surface Treatments
steel research international. H. Online Version of Record before inclusion in an issue. Wiley 2025

Weber, Fabian; Würth, Alexandra; Wagner, Aline et al.
Innovative evaluation methods for accelerated provision and assessment of fatigue data using mathematical methods
International Journal of Fatigue. Bd. 203. Elsevier BV 2025 S. 109350

Wetzler, Felix; Nebel, Jan Erik; Starke, Peter et al.
Process-Material-Property Investigations for Nanocrystalline Electrochemically Deposited CoP in a Sulfate Electrolyte
ECS Meeting Abstracts. Bd. MA2025-01. H. 28. The Electrochemical Society 2025 S. 1562

Ziman, Jonas A.; Maul, M.; Weber, F. et al.
Temperature-corrected electrical resistance in fatigue life prediction methods for higher testing frequencies
Procedia Structural Integrity. Bd. 68. Elsevier BV 2025 S. 1159 - 1165

Sauer, Lukas M.; Otto, Johannes L.; Ziman, Jonas A. et al.
Test setup for analyzing the electrical resistance during fatigue loading for metastable austenite AISI 304L and its diffusion-brazed joints
Journal of Materials Research and Technology. Bd. 35. Elsevier 2025 S. 535 - 544

Lyamkin, Viktor; Power, Sascha; Boller, Christian et al.
Thermo-Mechanical Fatigue in AISI 347 Austenitic Stainless Steel: Phase Transformation Kinetics at Elevated Temperatures
Applied Sciences. Bd. 15. H. 18. MDPI AG 2025 S. 10095

Weber, Fabian; Ziman, Jonas Anton; Raghuraman, Srinivasa Raghavan et al.
Use of NDT-Related Methods for a Response-Related Evaluation Regarding the Fatigue Behaviour of Metallic Materials
Research and Review Journal of Nondestructive Testing. Bd. 30. H. 11. NDT.net 2025

Weber, Fabian; Maul, Moritz; Juner, Florian et al.
A nonlinear lifetime prediction method for un‐ and low alloyed steels by damage determination based on non‐destructive measurement techniques
Fatigue & Fracture of Engineering Materials & Structures. Bd. 0. Wiley 2024 S. 1 - 18

Wetzler, Felix; Nebel, Jan-Erik; Zhang, Wei et al.
Electrochemical deposition of cobalt phosphorus for hard magnetic micro devices and the impact on magnetic anisotropy
Journal of Materials Research and Technology. Bd. 33. Elsevier B.V. 2024 S. 2081 - 2092

Heckmann, Klaus; Sievers, Jürgen; Acosta, Ruth et al.
Evaluation of the fatigue life of AISI 347 specimens with small notches based on local strain considerations
International Journal of Pressure Vessels and Piping. Bd. 211. Elsevier B.V. 2024 105297

Weber, F.; Starke, P.
Implementation of modelled surface roughness in the accelerated lifetime prediction of a 20MnMoNi5-5 steel
International Journal of Fatigue. Bd. 1. Elsevier B.V. 2024 108391

Weber, Fabian; Starke, Peter
MiDAcLife: Ein neues Lebensdauerprognoseverfahren basierend auf der Kombination zerstörungsfreier Messverfahren und (nicht)linearer Schadensakkumulationsansätze
Zerstörungsfreie Materialprüfung: DGZfP-Jahrestagung 2024. Osnabrück: Deutsche Gesellschaft für Zerstörungsfreie Prüfung 2024

Weber, Fabian; Wu, Haoran; Starke, Peter
A new short-time procedure for fatigue life evaluation based on the linear damage accumulation by Palmgren–Miner
International Journal of Fatigue. Bd. 172. Elsevier B.V. 2023 107653

Heckmann, Klaus; Acosta, Ruth; Bill, Tobias et al.
Detection of fatigue degradation in austenitic stainless steel with eddy current probe and machine learning
Journal of Materials Research and Technology. Bd. 27. Elsevier B.V. 2023 S. 7336 - 7346

Donnerbauer, Kai; Bill, Tobias; Starke, Peter et al.
Fatigue life evaluation of metastable austenitic stainless steel AISI 347 based on nondestructive testing methods for different environmental conditions
International Journal of Fatigue. Bd. 1. Elsevier B.V. 2023 108056

Weber, Fabian; Koziol, Janina; Starke, Peter
StressLife: A Short-Time Approach for the Determination of a Trend S-N Curve in and beyond the HCF Regime for the Steels 20MnMoNi5-5 and SAE 1045
Materials. Bd. 16. H. 11. MDPI 2023 3914

Teng, Zhenjie; Wu, H.; Pramanik, S. et al.
Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel
Advanced Engineering Materials. Bd. 1. Wiley 2022 S. 1

Wu, Haoran; Raghuraman, Srinivasa R.; Ziman, Jonas A. et al.
Characterization of the Fatigue Behaviour of Low Carbon Steels by Means of Temperature and Micromagnetic Measurements
Metals. Bd. 12. H. 11. MDPI 2022 1838

Theis, Martin; Bill, Tobias; Knoll, Heiko et al.
Electrochemical Deposition of CoP and CoNiP as Hard Magnetic Scales in a Position Measurement System
Metals. Bd. 12. H. 2. MDPI AG 2022 S. 235

Schaefer, Florian; Rosar, Jan; Wu, Haoran et al.
Obtaining a lower estimate of the fatigue limit of metals by a simplified quantitative thermometric approach in a low-cost one-specimen test
International Journal of Fatigue. Bd. 159. Elsevier BV 2022 106729

Schäfer, Florian; Rosar, Jan; Marx, Michael et al.
Quantitative Thermometry: A Revived Simplified Approach to Fatigue Strength Determination and Deformation Mechanisms
Procedia Structural Integrity. Bd. 37. Elsevier B.V. 2022 S. 299 - 306

Wu, Haoran; Ziman, Jonas A.; Raghuraman, Srinivasa R. et al.
Short-Time Fatigue Life Estimation for Heat Treated Low Carbon Steels by Applying Electrical Resistance and Magnetic Barkhausen Noise
Materials. Bd. 16. H. 1. MDPI 2022 S. 32

Hoffmann, Joachim E.; Pawar, Vrushali; Eifler, Dietmar et al.
Surface states by grinding thin strips of electrochemically deposited nanocrystalline nickel-iron
Materials Testing. Bd. 64. H. 7. Walter de Gruyter GmbH 2022 S. 903 - 931

Bill, Tobias; Acosta, Ruth; Boller, Christian et al.
A Short-Time Approach for Fatigue Life Evaluation of AISI 347 Steel for Nuclear Power Energy Applications
Applied Sciences. Bd. 11. H. 23. MDPI AG 2021 11405

Heckmann, Klaus; Sievers, Jürgen; Schopf, Tim et al.
Correlation of load drop and crack initiation criteria in fatigue life experiments of metallic materials
Engineering Fracture Mechanics. Bd. 251. Elsevier B.V. 2021 107785

Teng, Zhenjie; Wu, Haoran; Huang, Zhiyong et al.
Effect of mean stress in very high cycle fretting fatigue of a bearing steel
International Journal of Fatigue. Bd. 149. Elsevier B.V. 2021 106262

Lyamkin, Viktor; Pauly, Christoph; Starke, Peter et al.
Impact of cyclic strain on deformation-induced martensite morphology and magnetic properties of type 347 austenitic stainless steel
Materials Today Communications. Bd. 26. Elsevier B.V. 2021 101803

Acosta, Ruth; Heckmann, Klaus; Sievers, Jürgen et al.
Microstructure-Based Lifetime Assessment of Austenitic Steel AISI 347 in View of Fatigue, Environmental Conditions and NDT
Applied Sciences. Bd. 11. H. 23. MDPI AG 2021 11214

Aeran, Ashish; Acosta, Ruth; Siriwardane, Sudath C. et al.
A nonlinear fatigue damage model: Comparison with experimental damage evolution of S355 (SAE 1020) structural steel and application to offshore jacket structures
International Journal of Fatigue. Bd. 135. Elsevier Ltd. 2020 S. 105568

Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
A unified fatigue life calculation based on intrinsic thermal dissipation and microplasticity evolution
International Journal of Fatigue. Bd. 131. Elsevier B.V. 2020 S. 105370

Wu, H.; Bill, T.; Teng, Z.J. et al.
Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
Materials Science and Engineering: A. Bd. 6. Elsevier B.V. 2020 S. 139597

Starke, Peter; Acosta, Ruth; Bill, Tobias et al.
Evaluation of Influences of Materials Processing on the Fatigue Life of Quenched and Tempered SAE 4140
Fourth International Conference on Material and Component Performance under Variable Amplitude Loading (VAL4). Darmstadt. 2020

Tenkamp, Jochen; Awd, Mustafa; Siddique, Shafaqat et al.
Fracture–Mechanical Assessment of the Effect of Defects on the Fatigue Lifetime and Limit in Cast and Additively Manufactured Aluminum–Silicon Alloys from HCF to VHCF Regime
Metals. Bd. 10. H. 7. MDPI AG 2020 943

Lyamkin, Viktor; Starke, Peter; Boller, Christian
Magnetic force imaging for spatially resolved assessment of ferromagnetic phase fraction in austenitic stainless steel
Journal of Magnetism and Magnetic Materials. Bd. 497. Elsevier BV 2020 S. 165973

Hoffmann, Joachim E.; Schmitt, Martin-T.; Eifler, Dietmar et al.
Mechanical behavior of annealed electrochemically deposited nanocrystalline nickel-iron alloys
Materials Testing. Bd. 62. H. 3. Walter de Gruyter GmbH 2020 S. 225 - 241

Starke, P.; Baak, N.; Nickel, J. et al.
Qualification of an inner surface Barkhausen noise sensor for residual stress measurements of single-lip deep drilled AISI 4140 by means of X-ray diffraction
13th International Conference on Barkhausen Noise and Micromagnetic Testing. Prag. 2020 S. 1 - 8

Acosta, Ruth; Wu, Haoran; Sridaran Venkat, Ramanan et al.
SteBLife, a New Approach for the Accelerated Generation of Metallic Materials’ Fatigue Data
Metals. Bd. 10. H. 6. Basel: MDPI AG 2020 S. 798

Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
Thermodynamic entropy as a marker of high‐cycle fatigue damage accumulation: Example for normalized SAE 1045 steel
Fatigue & Fracture of Engineering Materials & Structures. Bd. 43. H. 12. John Wiley & Sons Ltd 2020 S. 2854 - 2866

Starke, Peter
Bewertung des Ermüdungsverhaltens zyklisch beanspruchter Werkstoffe mittels thermometrischer und elektrischer Messgrößen
Neu-Ulm: Proceedings Tagung Werkstoffprüfung 2019 S. 13 - 22

Maci, F.; Jamrozy, M.; Acosta, R. et al.
Characterization of the Fatigue Behavior of Mechanical and Thermal Aged Austenitic Power Plant Steel AISI 347
Correia, José A.F.O. ; De Jesus, Abílio M.P. ; Fernandes, António Augusto ; Calçada, Rui (Hrsg). Mechanical Fatigue of Metals : Experimental and Simulation Perspectives. Cham: Springer International Publishing 2019 S. 65 - 71 (Structural Integrity)

Teng, Zhenjie; Liu, Hanqing; Wang, Qingyuan et al.
Fretting behaviors of a steel up to very high cycle fatigue
Wear. Bd. 438-439. Elsevier B.V. 2019 S. 203078

Weber, Fabian; Acosta, Ruth; Eyrisch, Tina et al.
Influence of processing parameters on the fatigue life time of specimens made from quenched and tempered steel SAE 4140H
Materials Testing. Bd. 61. H. 9. Carl Hanser Verlag 2019 S. 842 - 850

Acosta, Ruth; Boller, Christian; Starke, Peter et al.
Non-destructive testing derived parameters for microstructure-based residual service life assessment of aging metallic materials in nuclear engineering
Materials Testing. Bd. 61. H. 11. Carl Hanser Verlag 2019 S. 1029 - 1038

Wu, Haoran; Bäumchen, Alexander; Engel, Alexander et al.
SteBLife – A new short-time procedure for the evaluation of fatigue data
International Journal of Fatigue. Bd. 124. Elsevier B.V. 2019 S. 82 - 88

Starke, Peter
StressLifetc – NDT-related assessment of the fatigue life of metallic materials
Materials Testing. Bd. 61. H. 4. Carl Hanser Verlag 2019 S. 297 - 303

Teng, Zhenjie; Wu, Haoran; Boller, Christian et al.
Thermography in high cycle fatigue short‐term evaluation procedures applied to a medium carbon steel
Fatigue & Fracture of Engineering Materials & Structures. Bd. 43. H. 3. Wiley 2019 S. 515 - 526

Starke, Peter; Wu, Haoran; Boller, Christian
Accelerated fatigue data evaluation for aircraft validation activities
7th International Symposium on Aircraft Materials At: Compiègne (France). 2018 S. 601 - 612

Venkat, R. S.; Starke, P.; Boller, Christian
Acoustics based assessment of a composite material under very high cycle fatigue loading
Christ, Hans-Jürgen (Hrsg). Fatigue of materials at very high numbers of loading cycles : experimental techniques, mechanisms, modeling and fatigue life assessment. Wiesbaden: Springer Spektrum 2018 S. 463 - 485 (Research)

Wu, H.; Starke, P.; Boller, C.
Characterization of the fatigue behaviour and lifetime evaluation of metallic materials based on thermographic NDT-methods
Proceedings of the 2018 International Conference on Quantitative InfraRed Thermography. Berlin: QIRT Council 2018

Starke, Peter; Lymakin, Viktor; Boller, Christian
Cyclic indentation as an alternative to classic fatigue evaluation
7th International Symposium on Aircraft MaterialsAt: Compiègne, France. 2018 S. 595 - 601

Starke, Peter; Eifler, Dietmar; Walther, Frank
Model-based correlation between electrical resistance and the dislocation structure of fatigued ICE R7 wheel steel
Materials Testing. Bd. 60. H. 7-8. De Gruyter 2018 S. 669 - 676

Starke, P.; Acosta, A.; Boller, C. et al.
Nutzung zerstörungsfreier Prüfverfahren zur mikrostrukturbasierten Restlebensdauerbewertung alternder metallischer Werkstoffe und Komponenten in der Energietechnik
Leipzig. 2018 S. 1 - 12

Starke, Peter; Schopf, Tim; Walther, Frank et al.
Quantitative Bewertung des Ermüdungs- und Schädigungsstadiums des in Kraftwerken eingesetzten Stahls X6CrNiNb18-10 anhand zerstörungsfreier Prüfverfahren
Bad Neuenahr. 2018

Starke, Peter; Bäumchen, Alexander; Wu, Haoran
SteBLife – A new short-time procedure for the calculation of S-N curves and failure probabilities
Materials Testing. Bd. 60. H. 2. Carl Hanser Verlag 2018 S. 121 - 127

Starke, Peter; Wu, Haoran; Boller, Christian
SteBLife – The enhanced short-time evaluation procedure for materials fatigue data generation, Materials Science Forum 941
Materials Science Forum. Bd. 941. 2018 S. 2395 - 2400

Heckmann, Klaus; Sievers, Jürgen; Schopf, Tim et al.
StrainLife: Efficient Fatigue Life Data Generation for an Enhanced Ageing Assessment of Metallic Components
Materials and Fabrication. Bd. 6B. Proceedings of the ASME 2018 Pressure Vessels and Piping Conference: American Society of Mechanical Engineers 2018

Starke, Peter; Acosta, Ruth; Boller, Christian et al.
StrainLife: Lebensdauerberechnung metallischer Werkstoffe und Komponenten der Energietechnik auf der Basis zerstörungsfreier Prüfverfahren
Bad Neuenahr. 2018

Starke, P.; Wu, H.
Use of non-destructive testing methods in a new one-specimen test strategy for the estimation of fatigue data
International Journal of Fatigue. Bd. 111. Elsevier Ltd. 2018 S. 177 - 185

Starke, P.; Seiler, G.; Boller, C.
Elektromagnetische On-line-Prüfung stromdurchfluteter Werkstoffproben aus austenitischem Stahl unter Ermüdungsbeanspruchung
DGZFP Jahrestagung, Koblenz/Germany. 2017 S. 1 - 6

Starke, P.; Boller, C.; Mueller, B. R. et al.
Nonlinearities based inverse approach for the characterisation of the damage evaluation process in very high cycle fatigued CFRP specimens
The Seventh International Conference on Very High Cycle Fatigue - VHCF7. 2017 S. 1 - 8

Starke, Peter; Boller, Christian
Zerstörungsfreie Prüfung zur effizienteren Ermittlung von Werkstoffwöhlerlinien
DGZfP Jahrestagung. 2017 S. 1 - 6

Boller, Christian; Fox, Christian; Starke, Peter et al.
Zustandserfassung von Stahlbauwerken mithilfe akustischer und elektromagnetischer Verfahren der ZfP
Bautechnik. Bd. 94. H. 10. Wiley 2017 S. 717 - 725

Starke, Peter; Sridaran Venkat, Ramanan; Boller, Christian
Acoustics Based Assessment of a Composite Material Under Very High Cycle Fatigue Loading
Conference: Proceedings in Material Science Engineering (MSE). Darmstadt. 2016

Starke, Peter; Wu, Hoaran; Boller, Christian
Advanced Evaluation of Fatigue Phenomena Using Non-Destructive Testing Methods
Materials Science Forum (Volume 879). online. 2016 S. 1841 - 1846

Boller, C.; Starke, P.
Enhanced assessment of ageing phenomena in steel structures based on materials data and non-destructive testing
Materialwissenschaft und Werkstofftechnik. Bd. 47. H. 10. Wiley 2016 S. 876 - 886

Starke, P.; Eifler, D.; Boller, C.
Fatigue assessment of metallic materials beyond strain measurement
International Journal of Fatigue. Bd. 82. Elsevier B.V. 2016 S. 274 - 279

Starke, Peter; Boller, Christian; Mahapatra, Debiprosad R. et al.
Integration of Non-Destructive Evaluation based Ultrasonic Simulation (INDEUS): A Means for Simulation in SHM
Bilbao. 2016

Starke, P.; Boller, C.; Seiler, G. et al.
NDT/NDE-Based Assessment of Steel Railway Infrastructure for Life Cycle Management
Cagliari. 2016 S. 1 - 12

Starke, P.; Boller, C.; Dobmann, G.
PHYsical-BAsed-Life calculations (PHYBAL-Procedure) utilizing Electromagnetic NDT Data for Enhanced Management of Ageing Steel Infrastructure
Budapest. 2016 S. 1 - 8

Starke, P.; Bleck, W.; Heßling, G. et al.
Schadenstolerante Stähle: Steigerung der Leistungsfähigkeit und Zuverlässigkeit hochbeanspruchter Bauteile
Konstruktion 68. 2016

Klein, Martin; Starke, Peter; Nowak, David et al.
Separation of surface, subsurface and volume fatigue damage effects in AISI 348 steel for power plant applications
Materials Testing. Bd. 58. H. 7-8. Carl Hanser Verlag 2016 S. 601 - 607

Starke, Peter; Wu, Haoran; Boller, Christian
Short time evaluation of metallic materials’ fatigue potential combining destructive and non-destructive testing methods
7th International Symposium on NDT in Aerospace. Bd. 21. NDT 2016 S. 1 - 8

Boller, Christian; Starke, Peter; Dobmann, Gerd et al.
Approaching the assessment of ageing bridge infrastructure
Smart Structures and Systems. Bd. 15. H. 3. Techno-Press 2015 S. 593 - 608

Knobbe, H.; Starke, P.; Hereñú, S. et al.
Cyclic deformation behaviour, microstructural evolution and fatigue life of duplex steel AISI 329 LN
International Journal of Fatigue. Bd. 80. Elsevier B.V. 2015 S. 81 - 89

Starke, P.; Seiler, G.; Kolakowski, P. et al.
Electromagnetics Based Damage Mapping of an Aged Steel Bridge
NDT-CE: International Symposium Non-Destructive Testing. Berlin. 2015

Starke, Peter; Walther, Frank
Model Based Correlation between the electrical Resistance and the Dislocation Structure of the fatigue-loaded ICE-Railway Wheel Steel R7
Materials Testing. Bd. 57. H. 1. Hanser 2015 S. 9 - 16

Starke, Peter; Walther, Frank
Modellbasierte Korrelation zwischen dem elektrischen Widerstand und der Versetzungsstruktur des ermüdungsbeanspruchten ICE-Radstahls R7
Materials Testing. Bd. 57. H. 1. Carl Hanser Verlag 2015 S. 9 - 16

Starke, Peter; Bafchi, Soumendu; Sridaran Venkat, Ramanan et al.
Monitoring Early Damage Initiation of Very High Cycle Fatigued Composite Material Using a Nonlinearities Based Inverse Approach
Stanford University (Hrsg). 10 th International conference of Structural health monitoring (IWSHM-2015). Stanford. 2015

Starke, Peter; Bremer, Cynara; Scholz, Ronja et al.
NDT-Based Characterization of Timber and Vulcanized Fiber for Civil Infrastructure
NDT-CE: International Symposium Non-Destructive Testing. Berlin. 2015

Starke, Peter; Wu, Haoran; Boller, Christian
PHYBAL based evaluation of material’s fatigue data for aged infrastructure using non-destructive testing methods
Kaiserslautern. 2015

Starke, Peter; Wu, Haron; Boller, Christian
PHYBAL based evaluation of material’s fatigue data for aged infrastructure using nondestructive testing methods
NDT-CE: International Symposium Non-Destructive Testing. Berlin. 2015

Starke, Peter; Boller, Christian; Bagchi, Soumendu et al.
Simulation based smart sensing design for fatigue damage detection in CFRP using non-linear phenomena
CANSMART/SMN. Vancouver. 2015

Starke, Peter; Walther, Frank
Zeit- und kosteneffiziente Ermittlung des Ermüdungsverhaltens sicherheitsrelevanter Werkstoffe und Bauteile
Pforzheim. 2015

Kramer, Hendrik S.; Starke, Peter; Klein, Marcus et al.
Cyclic hardness test PHYBALCHT – Short-time procedure to evaluate fatigue properties of metallic materials
International Journal of Fatigue. Bd. 63. Elsevier B.V. 2014 S. 78 - 84

Starke, Peter; Kramer, Hendrik; Klein, Marcus et al.
Cyclic Hardness Test PHYBALCHT: Short-time procedure to evaluate cyclic properties of metallic materials
Bd. 63. Kaiserslautern: Elsevier B.V. 2014 S. 78 - 84

Kramer, H.; Starke, P.; Klein, M. et al.
PHYBALCHT: Kurzzeitverfahren zur Abschätzung der Ermüdungseigenschaften metallischer Werkstoffe
HTM Journal of Heat Treatment and Materials. Bd. 69. H. 5. Carl Hanser Verlag 2014 S. 256 - 264

Starke, Peter; Eifler, Dietmar
Berechnung von Wöhlerkurven für verschiedene Mittelspannungsverhältnisse auf der Basis von “PHYBALmean” für den Vergütungsstahl 42CrMo4
Materialprüfung. Bd. 55. 2013 S. 8 - 11

Starke, Peter; Eifler, Dietmar
Calculation of S-N Curves for Different Mean Stresses on the Basis of “PHYBALmean” for the Quenched and Tempered Steel SAE 4140
Materials Testing. Bd. 55. H. 1. De Gruyter 2013 S. 8 - 11

Starke, Peter; Eifler, Dietmar; Smaga, M. et al.
Bewertung der Ermüdungsfestigkeit metastabiler austenitischer Stähle unter Berücksichtigung zyklischer Ver- und Entfestigungsvorgänge
Tagungsband Werkstoffprüfung: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht). Bad Neuenahr. 2012 S. 173 - 178

Germann, Holger; Starke, Peter; Eifler, Dietmar
Physically Based Fatigue Assessment of the Nodular Cast Iron ASTM 80-55-06 (EN-GJS-600) at Different Testing Frequencies
Advanced Engineering Materials. Bd. 14. H. 10. Wiley 2012 S. 859 - 866

Dörner, Florian; Kleiner, Otto; Schindler, Christian et al.
Rolling Contact Fatigue of Wheel and Rail
Materials Testing. Bd. 54. H. 5. Carl Hanser Verlag 2012 S. 304 - 312

Starke, Peter; Germann, Holger; Eifler, Dietmar
Characterisation of the cyclic deformation behaviour of the nodular cast iron ASTM 80-55-06 on the basis of physical measurement methods
CEUR Workshop Proceedings. Bd. 750. 2011 S. 55 - 60

Wagner, V.; Starke, P.; Kerscher, E. et al.
Cyclic deformation behaviour of railway wheel steels in the very high cycle fatigue (VHCF) regime
International Journal of Fatigue. Bd. 33. H. 1. Elsevier Ltd. 2011 S. 69 - 74

Starke, Peter; Eifler, Dietmar
Dauerfestigkeit, Mittelspannungseinfluss und zyklische Spannung-Dehnung-Kurve berechnet mit „PHYBAL“
Bochum. 2011

Starke, Peter; Kleiner, Otto; Schindler, Christian et al.
Der Radsatz - Ein Hochsicherheitselement birgt noch immenses Verbesserungspotential hinsichtlich Sicherheit und Lebensdauer
Kaiserslautern. 2011

Starke, Peter; Schindler, Christian; Kleiner, Otto et al.
Der Radsatz: Ein Hochsicherheitselement birgt noch immenses Verbesserungspotential hinsichtlich Sicherheit und Lebensdauer
Ingenieurspiegel. Bd. 6. H. 1. 2011 S. 12 - 15

Klein, M.; Starke, P.; Eifler, D.
Manufacturing influences on the fatigue properties of quenched and tempered SAE 4140 specimens
Procedia Engineering. Bd. 10. Elsevier Ltd. 2011 S. 1184 - 1189

Starke, Peter; Klein, Marcus; Eifler, Dietmar
Resistivity – a characteristic fingerprint of fatigue induced changes in the microstructure of metallic materials
Procedia Engineering. Bd. 10. Elsevier Ltd. 2011 S. 698 - 703

Germann, Holger; Starke, Peter; Eifler, Dietmar
Resistivity-Based Evaluation of the Fatigue Behavior of Cast Irons
Metallurgical and Materials Transactions A. Bd. 43. H. 8. Springer Science and Business Media LLC 2011 S. 2792 - 2798

Starke, Peter; Walther, Frank; Eifler, Dietmar
"PHYBAL" a short-time procedure for a reliable fatigue life calculation
Advanced engineering materials. Bd. 12. H. 4. Weinheim: Viley-VCH 2010 S. 276 - 282

Starke, Peter; Walther, Frank; Eifler, Dietmar
“PHYBAL” a short-time procedure for a reliable fatigue life calculation
DGM Working Group Materials Fatigue. Bd. 12. H. 4. Kiaserslautern. 2010 S. 276 - 282

Starke, Peter; Eifler, Dietmar
„PHYBAL“-Lebensdauerberechnung hochbeanspruchter metallischer Werkstoffe
Materials Testing. Bd. 52. H. 7-8. Kaiserslautern. 2010

Germann, Holger; Starke, Peter; Kerscher, Eberhard et al.
Fatigue behaviour and lifetime calculation of the cast irons EN-GJL-250, EN-GJS-600 and EN-GJV-400
Procedia Engineering. Bd. 2. H. 1. Elsevier B.V. 2010 S. 1087 - 1094

Starke, Peter; Eifler, Dietmar
Fatigue life calculation of highly stressed railway components on the basis of "PHYBAL"
8th International Conference on Railway Bogies and Running Gears. Budapest. 2010 S. 112 - 118

Starke, Peter; Eifler, Dietmar
Fatigue life calculation of highly stressed railway components on the basis of „PHYBAL“
Kaiserslautern. 2010 S. 112 - 118

Starke, Peter; Eifler, Dietmar
Kurzzeitverfahren zur Berechnung von Wöhlerkurven metallischer Werkstoffe auf der Basis physikalisch basierter Messgrößen
MP materials testing : Materialprüfung ; materials and components, technology and application. Bd. 52. H. 1/2. München: Hanser 2010 S. 57 - 62

Starke, Peter; Eifler, Dietmar
PHYBAL - eine physikalisch basierte Methode zur Lebensdauerberechnung für dynamisch hochbeanspruchte Bauteile von Nutzfahrzeugen
Berns, Karsten (Hrsg). Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, University of Kaiserslautern, Kaiserslautern, Germany. Aachen: Shaker 2010 S. 41 - 50

Starke, Peter; Eifler, Dietmar
PHYBAL - Lebensdauerberechnung hochbeanspruchter metallischer Werkstoffe
MP materials testing : Materialprüfung ; materials and components, technology and application. Bd. 52. H. 7/8. München: Hanser 2010 S. 490 - 495

Starke, Peter; Kerscher, Eberhard
Schadensanalyse an einer gebrochenen Antriebswelle eines Quads
Praktische Metallographie. Bd. 42. 2010 S. 25 - 30

Starke, Peter; Eifler, Dietmar
Short-time procedure for the calcualtion of Woehler curves of metallic materials on the basis of physical measurements
Materialprüfung. Bd. 52. 2010 S. 490 - 495

Starke, Peter; Eifler, Dietmar
“PHYBAL“ – Ein Instrument zur Lebensdauerberechnung hochbeanspruchter metallischer Werkstoffe
Darmstadt. 2009

Starke, Peter; Eifler, Dietmar
“PHYBAL“: Ein Instrument zur Lebensdauerberechnung hochbeanspruchter metallischer Werkstoffe
Kaiserslautern. 2009

Starke, Peter; Walther, Frank; Eifler, Dietmar
“PHYBAL” – Short-time calculation of Woehler curves of wheel steels
Kaiserslautern. 2009

Starke, Peter; Walther, Frank; Eifler, Dietmar
“PHYBAL”: Short-time calculation of Woehler curves of wheel steels
ZEV Rail. Bd. 6-7. 2009 S. 251 - 255

Starke, Peter; Eifler, Dietmar
Berechnung von Wöhlerkurven des Vergütungsstahles 42CrMo4 für unterschiedliche Spannungsverhältnisse auf der Basis von „PHYBALmean“
Tagungsband Werkstoffprüfung: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht). Bad Neuenahr. 2009

Starke, Peter; Eifler, Dietmar
Das Zusammenspiel der Disziplinen im Graduiertenkolleg 814, Ingenieurmaterialien auf verschiedenen Skalen: Experiment, Modellierung und Simulation
Kaiserslautern. 2009

Starke, Peter; Eifler, Dietmar
Fatigue assessment and fatigue life calculation of metals on the basis of mechanical hysteresis, temperature and resistance data
MP materials testing : Materialprüfung ; materials and components, technology and application. Bd. 51. H. 5. München: Hanser 2009 S. 261 - 268

Starke, Peter; Walther, Frank; Eifler, Dietmar
Fatigue life estimation of metallic materials under constant amplitude and standardised service loading
Sonsino, C. M. (Hrsg). Proceedings / Second International Conference on Material and Component Performance under Variable Amplitude Loading : March 23 - 26, 2009, Darmstadt, Germany. Bd. 2. Darmstadt. 2009 S. 903 - 912

Starke, Peter; Walther, Frank; Eifler, Dietmar
Fatigue life estimation of metallic materials under constant amplitude and standardised service loading
Darmstadt. 2009

Starke, Peter; Eifler, Dietmar
Kurzzeitverfahren zur Berechnung von Wöhlerkurven metallischer Werkstoffe auf der Basis mechanischer Hysteresis-, Temperatur- und Widerstandsmessungen
9. Tagung Gefüge & Bruch : 22. - 24. April 2009, Leoben/Österreich ; [Tagungsband]. Leoben, Österreich: Inst. für Struktur- und Funktionskeramik 2009 S. 49 - 56

Starke, Peter; Walther, Frank; Eifler, Dietmar
New fatigue life calculation method for quenched and tempered steel SAE 4140
Materials science and engineering / A. Bd. 523. H. 1-2. Amsterdam [u.a.]: Elsevier 2009 S. 246 - 252

Starke, Peter; Walther, Frank; Eifler, Dietmar
New fatigue life calculation method for quenched and tempered steel SAE 4140
Materials Science and Engineering: A. Bd. 523. H. 1-2. online: Elsevier 2009 S. 246 - 252

Starke, Peter; Eifler, Dietmar; Walther, Frank
Electrical and magnetic hysteresis measurements for the fatigue assessment of metallic materials
DFG Graduiertenkolleg 814. 2008

Starke, Peter; Walther, Frank; Eifler, Dietmar
Hysteresis, temperature and resistance measurements for the characterization of the fatigue behavior of metals
ISCS 2007, 5th Int. Conf. Structural Integrity of Welded Structures - Testing & Risk Assessment in the Development of Advanced Materials and Joints, Timisora, Romania,. H. 2008-04. www.ndt.net. 2008 S. 1 - 9

Starke, Peter; Walther, Frank; Eifler, Dietmar
Kurzzeitverfahren zur Berechnung der Wöhlerkurve von Radwerkstoffen
Eisenbahningenieur. Bd. 58. H. 1. 2008 S. 31 - 35

Starke, Peter
Lebensdauerberechnung bei ein- und mehrstufig beanspruchten Proben aus vergütetem 42CrMo4
Kaiserslautern: Techn. Univ. 2008 131 S.

Starke, Peter; Walther, Frank; Eifler, Dietmar
Lebensdauerbewertung für Werkstoffe der Verkehrstechnik auf der Basis physikalischer Messgrößen
Tagungsband Werkstoffprüfung: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. Berlin. 2008

Starke, Peter; Walther, Frank; Eifler, Dietmar
Physikalisch basierte Methode zur Lebensdauerberechnung metallischer Werkstoffe "PHYBAL"
Frenz, Holger (Hrsg). Herausforderung neuer Werkstoffe an die Forschung und Werkstoffprüfung : Tagung Werkstoffprüfung 2008 ; [04. und 05. Dezember 2008, Berlin]. Berlin: DVM 2008 S. 105 - 112 (DVM-Bericht ; 642)

Starke, Peter; Walther, Frank; Eifler, Dietmar
Physikalisch basierte Methode zur Lebensdauerberechnung metallischer Werkstoffe „PHYBAL“
Frenz, Holger (Hrsg). Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung : [4. und 5. Dezember 2008 Berlin]. Berlin: DVM 2008 S. 105 - 112 (Deutscher Verband für Materialforschung und -prüfung: DVM-Bericht ; 642)

Starke, Peter; Walther, Frank; Elfler, D.
Short-term Wöhler curve calculation for wheel materials
Eisenbahningenieur. Bd. Vol. 59. 2008 S. 31 - 35

Starke, Peter; Walther, Frank; Eifler, Dietmar
Short-time calculation of Woehler curves using “PHYBAL”
IRS 2008, 2nd Int. Railway Symposium,  15.-17. Oktober  2008. Istanbul, Turkey. 2008 S. 1201 - 1210

Starke, Peter; Walther, Frank; Eifler, Dietmar
Fatigue assessment and fatigue life calculation of quenched and tempered SAE 4140 steel based on stress-strain hysteresis, temperature and electrical resistance measurements
Fatigue & fracture of engineering materials & structures. Bd. 30. H. 11. Oxford u.a.: Wiley-Blackwell 2007 S. 1044 - 1051

Starke, Peter
Lebensdauerberechnung bei ein- und mehrstufig beanspruchten Proben aus vergütetem 42CrMo4
TU Kaiserslautern. 2007

Starke, Peter; Walther, Frank; Eifler, Dietmar
Lifetime calculation of cyclically loaded steel parts for traffic systems
International Conference Residual Fatigue Life and Life Time Extension of In-Service Structures, Paris, France, May 30 - June 01 (2006). Paris. 2006 S. 259 - 266

Starke, Peter; Walther, Frank; Eifler, Dietmar
PHYBAL : a new method for lifetime prediction based on strain, temperature and electrical measurements
International journal of fatigue. Bd. 28. H. 9. Oxford: Elsevier 2006 S. 1028 - 1036

Starke, Peter; Walther, Frank; Eifler, Dietmar
PHYBAL: A new method for lifetime prediction based on strain
International Journal of Fatigue. Bd. 28. H. 9. online: Elsevier B.V. 2006 S. 1028 - 1036

Starke, Peter; Walther, Frank; Eifler, Dietmar
Lebensdauerbewertung für Werkstoffe der Verkehrstechnik auf der Basis physikalischer Messgrößen
Grellmann, Wolfgang (Hrsg). Berlin. 2005 S. 213 - 218 (DVM-Bericht 641)

Starke, Peter; Eifer, Dietmar; Walther, Frank
Lebensdauerbewertung für Werkstoffe der Verkehrstechnik auf der Basis physikalischer Messgrößen, Werkstoffprüfung – Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung
Berlin: W. Grellmann (Ed.) 2005 S. 213 - 218

Starke, Peter; Walther, Frank; Eifler, Dietmar
Physikalisch-basierte Lebensdauerbewertung betriebsnah beanspruchter Werkstoffe der Verkehrstechnik
Diepholz. 2005 S. 1 - 8

Starke, P.; Walther, F.; Schelp, M. et al.
Lebensdauerberechnung auf der Basis von σ,ε- σ,T- und σ,R-Messungen, Abschlusskolloquium des DFG-Schwerpunktprogramms: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Bauteile“ in Zus. mit dem DVM
Bremen. 2004 S. 83 - 90