Prof. Dr.-Ing. Peter Mitschang
Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) (RPTU in Kaiserslautern), Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau
- 0631/2017-103
Salmins, Maximilian; Gortner, Florian; Mitschang, Peter
Challenges in Manufacturing of Hemp Fiber-Reinforced Organo Sheets with a Recycled PLA MatrixPolymers. Bd. 15. H. 22. MDPI 2023 4357
Salmins, Maximilian; Mitschang, Peter
Investigation of an optimized hot press process design for manufacturing structural polyethersulfone foamsAdvanced Manufacturing: Polymer & Composites Science. Bd. 9. H. 1. Informa UK Limited 2023 S. 1 - 25
Detzel, Martin; Mitschang, Peter; Breuer, Ulf
New Approach for Processing Recycled Carbon Staple Fiber Yarns into Unidirectionally Reinforced Recycled Carbon Staple Fiber TapePolymers. Bd. 15. H. 23. MDPI 2023 S. 4575
Schommer, D.; Duhovic, M.; Hoffmann, T. et al.
Polarization imaging for surface fiber orientation measurements of carbon fiber sheet molding compoundsComposites Communications. Bd. 37. Elsevier B.V. 2023 101456
Salmins, Maximilian; Mitschang, Peter
Bending properties of structural foams manufactured in a hot press processAdvanced Manufacturing: Polymer & Composites Science. Bd. published online. Informa UK Limited 2022 S. 1 - 17
Semar, Jan E.; May, David; Mitschang, Peter
Evaluation of different bonding strategies for glass fibre-reinforced epoxy resin with embedded elastomer layersPlastics, Rubber and Composites: Macromolecular Engineering. Bd. 51. H. 8. Informa UK Limited 2022 S. 454 - 461
Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Influence of Fungal Decay on Mechanical Properties of Bio-based Sheet Molding Compounds (SMC)Polymers and Polymer Composites. Bd. 30. SAGE 2022 S. 1 - 11
Becker, Stephan; Michel, Marc; Mitschang, Peter et al.
Influence of polymer matrix on the induction heating behavior of CFRPC laminatesComposites Part B: Engineering. Bd. 231. Elsevier B.V. 2022 S. 109561
Weidmann, Stefan; Volk, Petra; Mitschang, Peter et al.
Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer compositesComposites Part A: Applied Science and Manufacturing. Bd. 154. Elsevier B.V. 2022 S. 106791
Becker, S.; Mitschang, P.
Process Improvement of Continuous Induction Welding of Carbon Fiber-Reinforced Polymer CompositesJournal of Materials Engineering and Performance. Bd. 2022. Springer Science and Business Media LLC 2022 S. 1
Willenbacher, Bjoern; May, David; Mitschang, Peter
Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressureAdvanced Manufacturing: Polymer & Composites Science. Bd. 2022. Informa UK Limited 2022 S. 1 - 5
Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Use of bio-based and renewable materials for sheet molding compounds (SMC) – Mechanical properties and susceptibility to fungal decayComposites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 100242
Schmidt, Tim; May, David; Duhovic, Miro et al.
A combined experimental–numerical approach for permeability characterization of engineering textilesPolymer Composites. Bd. 42. H. 7. Wiley 2021 S. 3363 - 3379
Gortner, Florian; Mitschang, Peter; Ooms, Peter et al.
Bio-basierte und nachwachsende Rohstoffe eröffnen neue Anwendungsmöglichkeiten für gewichtsoptimierte duroplastische Werkstoffe im KFZ- und NFZ-BereichBerns, Karsten; Dressler, Klaus; Kalmar, Ralf; Stephan, Nicole; Teutsch, Reusch; Thul, Martin (Hrsg). Commercial Vehicle Technology 2020/2021: Proceedings. Wiesbaden: Springer Vieweg 2021 S. 264 - 278
May, David; Mitschang, Peter
Concept for Darcy-based viscosity measurement for fast-curing resin systemsComposites Communications. Bd. 27. Elsevier B.V. 2021 S. 100881
Piott, Florian; Krämer, Andreas; Lück, André et al.
Increasing the performance of continuous compression moulding by local pressure adaptionAdvanced Manufacturing: Polymer & Composites Science. Bd. 7. H. 1. Informa UK Limited 2021 S. 1 - 14
Goergen, Christian; May, David; Mitschang, Peter
Integration of rCF in resin transfer pressing processJournal of Reinforced Plastics and Composites. Bd. 39. H. 9-10. SAGE Publications 2020 S. 361 - 372
Mischo, Florian; Goergen, Christian; Schmeer, Sebastian et al.
Use of recycled carbon staple fibers in an advanced thermoforming process and analysis of its crash performanceAdvanced Manufacturing: Polymer & Composites Science. Bd. 6. H. 1. Informa UK Limited 2020 S. 48 - 56
Becker, Stephan; Mitschang, Peter
Beeinflussung der Induktionserwärmung von textilverstärktem CFK durch LaminatparameterZeitschrift Kunststofftechnik. Bd. 1. Carl Hanser Verlag 2019 S. 210 - 244
Gortner, Florian; Mitschang, Peter
Bio-Based and Renewable Filler Materials for Thermoset CompoundsKey Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 650 - 657
Domm, Matthias; Schlimbach, Jens; Mitschang, Peter
Characterization method for continuous fiber reinforced thermoplastic strandsJournal of Thermoplastic Composite Materials. Bd. 34. H. 3. SAGE Publications 2019 S. 328 - 352
Kühn, Florian; Rehra, Jan; May, David et al.
Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional compositesAdvanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 1. Informa UK Limited 2019 S. 37 - 49
Gortner, Florian; Mitschang, Peter; Neu, Wiebke et al.
Efficient Process Chain for Processing Natural Fiber Reinforced ThermoplasticsKey Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 658 - 663
May, David; Aktas, A.; Advani, S.G. et al.
In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exerciseComposites Part A: Applied Science and Manufacturing. Bd. 121. Elsevier BV 2019 S. 100 - 114
Weidmann, Stefan; Mitschang, Peter
Influence of welding temperature and weathering on inductive welded hybrid joints made of steel and TP-FRPCHausmann, Joachim M. (Hrsg). 22nd Symposium on Composites. Zurich: Trans Tech Publications 2019 S. 127 - 225 (Key Engineering Materials Ser. ; Volume 809)
Willenbacher, Björn; May, David; Mitschang, Peter
Metrological determination of inhomogeneous hydrodynamic compaction during unsaturated out-of-plane permeability measurement of technical textilesAdvanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 2. Informa UK Limited 2019 S. 51 - 54
Goergen, Christian; Klingler, Andreas; Grishchuk, Sergiy et al.
Novel Approach in B-Staging of an Epoxy Resin for Development of rCF Non-Woven Prepregs for RTP ProcessingKey Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 521 - 526
May, David; Willenbacher, Björn; Semar, Jan et al.
Out-of-plane permeability of 3D woven fabrics for composite structuresThe Journal of The Textile Institute. Bd. 111. H. 7. Informa UK Limited 2019 S. 1047 - 1053
Willenbacher, Björn; May, David; Mitschang, Peter
Out–of–plane capillary pressure of technical textilesComposites Part A: Applied Science and Manufacturing. Bd. 124. Elsevier BV 2019 S. 105495
Weidmann, Stefan; Hümbert, Martina; Mitschang, Peter
Suitability of thickness change as process control parameter for induction welding of steel/TP-FRPC jointsAdvanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 2. Informa UK Limited 2019 S. 55 - 68
Goergen, Christian; Schommer, Dominic; Duhovic, Miro et al.
Deep drawing of organic sheets made of hybrid recycled carbon and thermoplastic polyamide 6 staple fiber yarnsJournal of Thermoplastic Composite Materials. Bd. 33. H. 6. SAGE Publications 2018 S. 754 - 778
Rimmel, Oliver; May, David; Goergen, Christian et al.
Development and validation of recycled carbon fiber-based binder tapes for automated tape laying processesJournal of Composite Materials. Bd. 53. H. 23. SAGE Publications 2018 S. 3257 - 3268
Resch-Fauster, Katharina; Džalto, Jovana; Anusic, Andrea et al.
Effect of the water absorptive capacity of reinforcing fibers on the process ability, morphology, and performance characteristics of composites produced from polyfurfuryl alcoholAdvanced Manufacturing: Polymer & Composites Science. Bd. 4. H. 1. Informa UK Limited 2018 S. 13 - 23
Rimmel, Oliver; May, David; Mitschang, Peter
Impact of stitching on permeability and mechanical properties of preforms manufactured by dry fiber placementPolymer Composites. Bd. 40. H. 4. Wiley 2018 S. 1631 - 1642
May, David; Domm, Matthias; Mitschang, Peter
Wet Fiber Placement: A novel manufacturing technology for continuous fiber reinforced polymer compositesJournal of Composite Materials. Bd. 53. H. 4. SAGE Publications 2018 S. 521 - 533
Rimmel, Oliver; Mack, Jens; Becker, David et al.
Automated Direct Fibre Placement with Online Binder ApplicationLightweight Design worldwide. Bd. 10. H. 2. Springer Science and Business Media LLC 2017 S. 48 - 53
Rimmel, Oliver; Mack, Jens; Becker, David et al.
Automatisierte Faserdirektablage mit Online-BebinderungLightweight Design. Bd. 10. H. 2. Springer Science and Business Media LLC 2017 S. 56 - 61
Jung, Gihune; Schmeer, Sebastian; Mitschang, Peter
Crash behaviour and performance of long fibre reinforced thermoplastic material in comparison with continuous fibre reinforcementInternational Journal of Crashworthiness. Bd. 23. H. 4. Informa UK Limited 2017 S. 433 - 445
Grieser, Timo; Becker, David; Mitschang, Peter
Investigation of the bending behaviour of multi-ply dry carbon fibre non-crimped fabricsThe Journal of The Textile Institute. Bd. 109. H. 4. Informa UK Limited 2017 S. 455 - 465
Becker, David; Grössing, Harald; Konstantopoulos, Spiridon et al.
An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking studyAdvanced Manufacturing: Polymer & Composites Science. Bd. 2. H. 1. Informa UK Limited 2016 S. 34 - 45
Medina, Luisa; Kühn, F.; Becker, D. et al.
Ceramic pressing tool for variothermal processing of thermoplastic fiber composites17 (Hrsg). European Conference on Composite Materials. München. 2016
Medina, Luisa; Christmann, M.; Mitschang, P.
Effect of Inhomogeneous Temperature Distribution on the Impregnation Process of hte Continuous Compression Molding TechnologyJournal of Thermoplastic Polymer Composite Materials. Bd. 30. H. 9. 2016 S. 1285 - 1302
Medina, Luisa; Dzalto, J.; Mitschang, P.
Investigation of the Infrared Heating of Natural Fiber Reinforced Thermoplastic Materials17 (Hrsg). European Conference on Composite Materials. München. 2016
Rimmel, Oliver; Becker, David; Mitschang, Peter
Maximizing the out-of-plane-permeability of preforms manufactured by dry fiber placementAdvanced Manufacturing: Polymer & Composites Science. Bd. 2. H. 3-4. Informa UK Limited 2016 S. 93 - 102
Medina, Luisa; Gortner, F.; Mitschang, P.
Optimized bast fiber reinfroced polypropylene for automotive applications,ECCM17 (Hrsg). München. 2016
Holschuh, René; Becker, David; Mitschang, Peter
Techno-Economic Feasibility Study of New Concept for Build-Up of Local Load Specific Reinforced Hybrid StructuresPolymers and Polymer Composites. Bd. 24. H. 5. SAGE Publications 2016 S. 347 - 364
Groessing, H.; Becker, David; Kaufmann, S. et al.
An evaluation of the reproducibility of capacitive sensor based in-plane permeability measurements:A benchmarking studyExpress Polymer Letters. Bd. 9. H. 2. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2015 S. 129 - 142
Becker, David; Broser, J.; Mitschang, Peter
An experimental study of the influence of process parameters on the textile reaction to transverse impregnationPolymer Composites. Bd. 37. H. 9. Wiley 2015 S. 2820 - 2831
Medina, L.; Dzalto, J.; Mitschang, P.
Biobased composite: Sandwiches for automotive applicationsBioplastics Magazine. Bd. 1. H. 10. 2015 S. 16 - 18
Becker, David; Mitschang, Peter
Influence of preforming technology on the out-of-plane impregnation behavior of textilesComposites Part A: Applied Science and Manufacturing. Bd. 77. Elsevier B.V. 2015 S. 248 - 256