Leibniz-Institut für Verbundwerkstoffe GmbH (IVW) (RPTU in Kaiserslautern)
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau
- 0631/2017-0
May, David
Prozessentwicklung für Faser-Kunststoff-Verbunde: Studien zu Verarbeitungseigenschaften von Halbzeugen als Basis einer ganzheitlichen ForschungsmethodikKaiserslautern: Leibniz-Institut für Verbundwerkstoffe GmbH 2022 375 S. (IVW-Schriftenreihe (148))
Willenbacher, Bjoern; May, David; Mitschang, Peter
Saturated out-of-plane permeability and deformation metrology of textiles at high levels of injection pressureAdvanced Manufacturing: Polymer & Composites Science. Bd. 2022. Informa UK Limited 2022 S. 1 - 5
Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Simultaneous access to different types of volume changes and the degree of cure during isothermal polymerization of polymer networksExpress Polymer Letters. Bd. 16. H. 11. Budapest: University of Technology and Economics, Faculty of Mechanical Engineering, Department of Polymer Engineering; Scientific Society of Mechanical Engineering 2022 S. 1193 - 1207
Eckrich, Maximilian; Arrabiyeh, Peter A.; Dlugaj, Anna M. et al.
Structural topology optimization and path planning for composites manufactured by fiber placement technologiesComposite Structures. Bd. 289. Elsevier B.V. 2022 115488
Klingler, Andreas; Gilberg, Maurice; Wetzel, Bernd et al.
Temperature-rate induced polymerization and phase separation of block copolymer toughened polymer compositesComposites Science and Technology. Bd. in Press. Elsevier B.V. 2022 109329
Lee, Jeeeun; Duhovic, Miro; Allen, Tom et al.
Transverse liquid composite moulding processes for advanced composites material manufacturingPlastics, Rubber and Composites. Bd. 51. H. 8. Informa UK Limited 2022 S. 373 - 382
Gortner, Florian; Schüffler, Anja; Fischer-Schuch, Jochen et al.
Use of bio-based and renewable materials for sheet molding compounds (SMC) – Mechanical properties and susceptibility to fungal decayComposites Part C: Open Access. Bd. 7. Elsevier B.V. 2022 100242
Vogtmann, Julia; Klingler, Andreas; Rief, Thomas et al.
3D X-ray Microscopy as a Tool for in Depth Analysis of the Interfacial Interaction between a Single Carbon Fiber and an Epoxy Matrix after Mechanical LoadingJournal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 121
Schmidt, Tim; May, David; Duhovic, Miro et al.
A combined experimental–numerical approach for permeability characterization of engineering textilesPolymer Composites. Bd. 42. H. 7. Wiley 2021 S. 3363 - 3379
Arrabiyeh, Peter A.; May, David; Eckrich, Maximilian et al.
An overview on current manufacturing technologies: Processing continuous rovings impregnated with thermoset resinPolymer Composites. Bd. 42. H. 11. Wiley 2021 S. 5630 - 5655
Gryshchuk, Liudmyla; Grishchuk, Sergiy; Kote, E. et al.
Bio-based soft polyurethane foams filled with coffee wasteInternational Research and Practice Conference "Nanotechnology and Nanomaterials" (NANO 2021): Abstract book. Lviv: LLC 2021 0
Gortner, Florian; Mitschang, Peter; Ooms, Peter et al.
Bio-basierte und nachwachsende Rohstoffe eröffnen neue Anwendungsmöglichkeiten für gewichtsoptimierte duroplastische Werkstoffe im KFZ- und NFZ-BereichBerns, Karsten; Dressler, Klaus; Kalmar, Ralf; Stephan, Nicole; Teutsch, Reusch; Thul, Martin (Hrsg). Commercial Vehicle Technology 2020/2021: Proceedings. Wiesbaden: Springer Vieweg 2021 S. 264 - 278
Coccia, Francesca; Gryshchuk, Liudmyla; Moimare, Pierluigi et al.
Chemically Functionalized Cellulose Nanocrystals as Reactive Filler in Bio-Based Polyurethane FoamsPolymers. Bd. 13. H. 15. MDPI AG 2021 2556
Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Composite technology: Prepregs and monolithic part fabrication technologies2. Aufl. Munich: Hanser 2021 245 S.
May, David; Mitschang, Peter
Concept for Darcy-based viscosity measurement for fast-curing resin systemsComposites Communications. Bd. 27. Elsevier B.V. 2021 S. 100881
Rosnitschek, Tobias; Seefeldt, Andressa; Alber-Laukant, Bettina et al.
Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel ComponentsMaterials. Bd. 14. H. 18. MDPI 2021 5173
Krummenacker, Janna; Hausmann, Joachim
Determination of Fatigue Damage Initiation in Short Fiber-Reinforced Thermoplastic through Acoustic Emission AnalysisJournal of Composites Science. Bd. 5. H. 8. MDPI AG 2021 221
Akpan, Emmanuel Isaac; Wetzel, Bernd; Friedrich, Klaus
Eco-friendly and sustainable processing of wood-based materialsGreen Chemistry. Bd. 23. H. 6. Royal Society of Chemistry (RSC) 2021 S. 2198 - 2232
Gapeeva, Anna; Vogtmann, Julia; Zeller-Plumhoff, Berit et al.
Electrochemical Surface Structuring for Strong SMA Wire–Polymer Interface AdhesionACS Applied Materials & Interfaces. Bd. 13. H. 18. American Chemical Society (ACS) 2021 S. 21924 - 21935
Almazán-Lázaro, Juan-Antonio; López-Alba, Elías; Schmeer, Sebastian et al.
Enhanced Low-Velocity Impact Properties for Resin Film Infusion-Manufactured Composites by Flow-Control ApproachPolymers. Bd. 13. H. 19. MDPI AG 2021 3431
Adler, Sonja E.; Güttler, Barbara E.; Bendler, Lubov et al.
Evaluation of recycled carbon fibre/epoxy composites: Thermal degradation behaviour of pyrolysed and virgin carbon fibres using thermogravimetric analysisAdvanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 82 - 92
Baumann, Andreas; Hausmann, Joachim
Experimental Investigation of Instabilities on Different Scales in Compressive Fatigue Testing of CompositesJournal of Composites Science. Bd. 5. H. 4. MDPI AG 2021 S. 114
Motsch-Eichmann, Nicole; Rieger, Florian; Rief, Thomas et al.
Experimental investigation of modified co-curing process for carbon fiber/epoxy-laminatesJournal of Micromechanics and Molecular Physics. Bd. 06. H. 03. World Scientific Pub Co Pte Ltd 2021 S. 1 - 12
Hausmann, Joachim; Krummenacker, Janna; Klingler, Andreas et al.
Improvement of fatigue strength of carbon fiber reinforced polymers by matrix modifications for ultrafast rotating flywheelsViehweger, C. u. a. (Hrsg). Frontiers of Science and Technology. Berlin: De Gruyter 2021 S. 279 - 289
Piott, Florian; Krämer, Andreas; Lück, André et al.
Increasing the performance of continuous compression moulding by local pressure adaptionAdvanced Manufacturing: Polymer & Composites Science. Bd. 7. H. 1. Informa UK Limited 2021 S. 1 - 14
Weinbrenner, Marius; Weber, Regino; Neumeyer, Thomas et al.
Influence of foam density on burning behavior of polymer bead foamsJournal of Applied Polymer Science. Bd. 139. H. 4. Wiley 2021 51558
May, David
Integrated Product Development with Fiber-Reinforced PolymersCham: Springer International Publishing 2021 (Engineering Materials)
Klingler, Andreas
Morphology and fracture of block copolymer and core-shell rubber particle modified epoxies and their carbon fibre reinforced compositesKaiserslautern: Leibniz-Institut für Verbundstoffe 2021 161 S.
May, D.; Goergen, C.; Friedrich, K.
Multifunctionality of polymer composites based on recycled carbon fibers: A reviewAdvanced Industrial and Engineering Polymer Research. Bd. 4. H. 2. Elsevier B.V. 2021 S. 70 - 81
Friedrich, Klaus; Akpan, E. I.; Wetzel, Bernd
On the Tribological Properties of Extremely Different Wood MaterialsEuropean Journal of Wood and Wood Products. Bd. 79. H. 4. Springer 2021 S. 977 - 988
Friedrich, K.; Akpan, E. I.; Wetzel, B.
On the tribological properties of extremely different wood materialsEuropean Journal of Wood and Wood Products. Bd. 79. H. 4. Springer Science and Business Media LLC 2021 S. 977 - 988
Yong, A.X.H.; Aktas, A.; May, D. et al.
Out-of-plane permeability measurement for reinforcement textiles : A benchmark exerciseComposites Part A : Applied Science and Manufacturing. Bd. 148. Elsevier Ltd. 2021 S. 106480
Gebhard, Andreas; Jim, Bai Cheng
Photo-optical luminance analysis of transfer films: Measurement principle, data analysis and result plottingTribology International. Bd. 153. Elsevier Ltd. 2021 S. 106626
Akpan, Emmanuel; Friedrich, Klaus; Jacob, Stefan et al.
Reactive Layer Assembly Sustains an Interlocked Structure in Green Processed and Scalable High-Performance Layered WoodACS Sustainable Chemistry & Engineering. Bd. 9. H. 47. American Chemical Society (ACS) 2021 15744
Mehl, Konstantin; Schmeer, Sebastian; Motsch-Eichmann, Nicole et al.
Structural Optimization of Locally Continuous Fiber-Reinforcements for Short Fiber-Reinforced PlasticsJournal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 S. 118
Mrzljak, Selim; Schmidt, Stefan; Kohl, Andreas et al.
Testing Procedure for Fatigue Characterization of Steel-CFRP Hybrid Laminate Considering Material Dependent Self-HeatingMaterials. Bd. 14. H. 12. MDPI AG 2021 S. 3394
Dröder, Klaus; Karpuschewski, Bernhard; Uhlmann, Eckart et al.
A comparative analysis of ceramic and cemented carbide end millsProduction Engineering. Bd. 14. H. 3. Springer LLC 2020 S. 355 - 364
Setti, Dinesh; Arrabiyeh, Peter A.; Kirsch, Benjamin et al.
Analytical and experimental investigations on the mechanisms of surface generation in micro grindingInternational Journal of Machine Tools and Manufacture. Bd. 149. Elsevier B.V. 2020 103489
Donhauser, Tobias
Beitrag zur Auslegung hochbeanspruchter Bauteile aus Faser-Thermoplast-VerbundenKaiserslautern: Institut für Verbundwerkstoffe GmbH 2020 131 S.
Baumann, Andreas; Hausmann, Joachim
Compression Fatigue Testing Setups for Composites—A ReviewAdvanced Engineering Materials. Bd. 23. H. 2. Wiley 2020 S. 2000646
Walter, Rolf; Selzer, Ralf; Gurka, Martin et al.
Effect of filament quality, structure, and processing parameters on the properties of fused filament fabricated short fiber-reinforced thermoplasticsStructure and Properties of Additive Manufactured Polymer Components. Amsterdam: Elsevier 2020 S. 253 - 302
Finck, David; Seidel, Christian; Ostermeier, Anika et al.
Experimental Investigation on the In-Plane Creep Behavior of a Carbon-Fiber Sheet Molding Compound at Elevated Temperature at Different Stress StatesMaterials. Bd. 13. H. 11. MDPI AG 2020 S. 2545
Lengsfeld, Hauke; Lacalle, Javier; Neumeyer, Thomas et al.
Faserverbundwerkstoffe: Prepregs und ihre Verarbeitung2. Aufl. München: Hanser 2020 288 S.
Popow, Vitalij; Gurka, Martin
Full factorial analysis of the accuracy of automated quantification of hidden defects in an anisotropic carbon fibre reinforced composite shell using pulse phase thermographyNDT & E International. Bd. 116. Elsevier Ltd. 2020 S. 102359
Bajpai, Ankur; Wetzel, Bernd; Friedrich, Klaus
High strength epoxy system modified with soft block copolymer and stiff core-shell rubber nanoparticles: Morphology, mechanical properties, and fracture mechanismsExpress Polymer Letters. Bd. 14. H. 4. Department of Polymer Engineering, Scientific Society of Mechanical Engineering 2020 S. 384 - 399
Becker, Yves Nicolas; Motsch, Nicole; Hausmann, Joachim et al.
Hybrid composite pedicle screw - finite element modelling with parametric optimizationInformatics in Medicine Unlocked. Bd. 18. Elsevier B.V. 2020 S. 100290 100290
Bauer, Philipp; Becker, Yves N.; Motsch-Eichmann, Nicole et al.
Hybrid thermoset-thermoplastic structures: An experimental investigation on the interface strength of continuous fiber-reinforced epoxy and short-fiber reinforced polyamide 6Composites Part C: Open Access. Bd. 3. Elsevier B.V. 2020 S. 100060
Kopietz, Mark; Friedrich, Klaus; Wetzel, Bernd
In situ functionalisation of organomineral hybrid resins for tough basalt fibre reinforced plasticsPlastics, Rubber and Composites. Bd. 50. H. 3. Informa UK Limited 2020 S. 105 - 115
Santos, Alberto L.; Nakazato, Roberto Z.; Schmeer, Sebastian et al.
Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminateComposites Part B: Engineering. Bd. 184. Elsevier Ltd. 2020 S. 107718
Kelkel, Benjamin; Popow, Vitalij; Gurka, Martin
Inline quantification and localization of transverse matrix cracking in cross-ply CFRP during quasi-static tensile testing by a joint event-based evaluation of acoustic emission and passive IR thermographyComposites Science and Technology. Bd. 190. Elsevier B.V. 2020 S. 108013