Prof. Dr. rer. nat. Dr. h.c. Peter Quirmbach
Technische Chemie und Korrosionswissenschaften, Universität Koblenz
- 0261/287-2239
- 0261/287-2251
Hahn, Dominik; Quirmbach, Peter
Structural Analysis of Phosphate-Bonded Al2O3-MgAl2O4-High-Temperature CeramicsRefractories Worldforum. Bd. 16. H. 1. Baden-Baden: Goeller 2024 S. 41 - 45
Razavi, Anita; Henn, Isabelle; Sax, Almuth et al.
X-ray computed tomography study of microstructure weakening by high-temperature hydrogen attack on refractoriesIntnational Journal of Ceramic Engineering & Science. Bd. 6. H. 2. Westerville: Wiley 2024 S. 1 - 8
Doll, Julia; Masoudi Alavi, Ali; Quirmbach, Peter
High-Resolution Mass Spectroscopy and Multivariate Statistics: A Powerful Tool for the Characterisation and Discrimination of Refractory Materialsrefractories Worldforum. Bd. 15. H. 1. Baden-Baden: Goeller 2023 S. 38 - 40
Henn, Isabelle; Sax, Almuth; Quirmbach, Peter
Hydrogen induced attack of Al2O3-SiO2 Refractories: Application of SEM Techniques and ThermodynamicsEuropean Centre for Refractories (ECREF) (Hrsg). Proceedings 18th Unified International Technical Conference on Refractories (UNITECR): Biennial Worldwide Congress on Refractories. Höhr-Grenzhausen. 2023 S. 889
Stein, Alena; Sax, Almuth; Quirmbach, Peter
Influence of mineral composition on the processing of Iron-rich Bauxite raw materials by using Hydrochloric Acid leachingEuropean Centre for Refractories (ECREF) (Hrsg). Proceedings 18th Unified International Technical Conference on Refractories (UNITECR): Biennial Worldwide Congress on Refractories. Höhr-Grenzhausen. 2023 S. 30 - 33
Quirmbach, Peter; Sax, Almuth
RefractoriesPöttgen, Rainer; Jüstel, Thomas; Strassert, Christian A. (Hrsg). From Magnetic to Bioactive Materials. Berlin, Boston: de Gruyter 2023 S. 244 - 259 (Applied Inorganic Chemistry 3)
Razavi, Anita; Stein, Alena; Quirmbach, Peter
Tomographic Imaging of Bauxite Grains Leached Using Hydrochloric AcidMinerals. Bd. 13. H. 7. Basel: MDPI 2023 S. 1 - 15
Doll, Julia; Masoudi Alavi, Ali; Quirmbach, Peter
What is really in there ? Classification of aromatic compunds in Carbon-based refractory bonds by high-resolution Mass Spectroscopy and multivariate statisticsEuropean Centre for Refractories (ECREF) (Hrsg). Proceedings 18th Unified International Technical Conference on Refractories (UNITECR): Biennial Worldwide Congress on Refractories. Höhr-Grenzhausen. 2023 S. 97 - 100
Doll, Julia; Masoudi Alavi, Ali; Quirmbach, Peter
Comparative analytical characterization of two carbonaceous binders used in refractory materialsAmerican Ceramic Society (Hrsg). Proceedings 17. UNITECR Conference. Westerville, OH, USA: Bulletin-Archive 2022
Hahn, Dominik; Quirmbach, Peter
Influence of MgAl2O4-spinel additions on the phosphate bonding in Al2O3-refractoriesAmerican Ceramic Society (Hrsg). Proceedings 17. UNITECR Conference. Westerville, OH, USA: Bulletin-Archive 2022 8 S.
Kasper, Johannes; Krause, Olaf; Quirmbach, Peter
Developing Setting Models for PCE-dispersed and CA-Cement-bonded Refractory CastablesRefractories Worldforum. Bd. 14. H. 1. Baden-Baden: Goeller-Verlag 2022 S. 38 - 44
Doll, Julia; Masoudi Alavi, Ali; Quirmbach, Peter
High-resolution mass spectrometry-based classification of high-boiling binders used in refractory materialsEuropean Ceramic Society (Hrsg). Ceramics in Europe 2022. Krakau. 2022 S. 515 - 516
Stein, Alena; Sax, Almuth; Quirmbach, Peter
Influence of Thermal Pre-Treatment on the Efficiency of Iron Leaching in Non-Refractory Grade Raw BauxiteEuropean Ceramic Society (Hrsg). Ceramics in Europe 2022. Krakau. 2022 S. 550 - 551
Hopp, Vanessa; Masoudi Alavi, Ali; Sax, Almuth et al.
Observation of the setting process of unshaped refractory materials by dynamic-mechanical analysisThe American Ceramic Society (Hrsg). Proceedings 17. UNITECR Conference. Westerville, OH, USA: Bulletin-Archive 2022 7 S.
Buhr, Andus; Quirmbach, Peter; Pischke, Jens et al.
Steel meets refractory. A new platform for technical exchange in GermanyAmerican Ceramic Society (Hrsg). Proccedings 17. UNITECR Conference. Westerville, OH, USA: Bulletin-Archive 2022 7 S.
Gerz, A; Schmid, M; Walenta, G et al.
Characterization of Low Cement Castables in application-related formulation rangesECREF European Centre for Refractories (Hrsg). Refractories in the global value chain. Höhr-Grenzhausen. 2021 S. 85 - 88 (ICR Proceedings)
Masoudi Alavi, Ali; Breitzke, Hergen; Hemberger, Yannick et al.
Insights into the mechanisms of the chemically initiated setting of potassium silicate solutions with aluminum metaphosphates: correlation of the structural and macroscopic parameters on the performance of the binding propertiesConstruction and Building Materials. Bd. 277. Elsevier 2021 S. 122260 - 122272
Stein, Alena; Sax, Almuth; Quirmbach, Peter
Iron leaching from nonrefractory grade bauxite: Individual process optimization and prediction by using DOEInternational Journal of Ceramic Engineering and Science. Bd. 3. H. 6. Hoboken, NJ, USA: Wiley Online Library 2021 S. 1 - 7
Hahn, Dominik; Masoudi Alavi, Ali; Hopp, Vanessa et al.
Phase development of phosphate-bonded Al2O3-MgAl2O4 high-temperature ceramics: XRD and solid-state NMR investigationsJournal of the American Ceramic Society. Bd. 104. H. 10. Hoboken, NJ: John Wiley & Sons, Inc. 2021 S. 6625 - 6642
Hahn, Dominik; Masoudi Alavi, Ali; Quirmbach, Peter
Powder XRD and 31P and 27Al solid state MAS NMR investigations of phase transformations in aluminium phosphate bonded Al2O3–MgAl2O4 refractoriesMaterials Chemistry and Physics. Bd. 267. Amsterdam: Elsevier B.V. 2021 S. 124663 - 124673
Hopp, Vanessa; Masoudi Alavi, Ali; Hahn, Dominik et al.
Structure-Property Functions of Inorganic Binders for RefractoriesMaterials. Bd. 14. H. 16. Basel: MDPI 2021 S. 1 - 15 4636
Clasen, Stephan; Sax, Almuth; Quirmbach, Peter
Analysis of Molten Steel Infiltration into the Gas Purging Slits of Purging PlugsRefractories WorldForum. Bd. 12. H. 1. Baden-Baden: Göller 2020 S. 72 - 76
Hopp, Vanessa; Masoudi Alavi, Ali; Sax, Almuth et al.
Influence of Aluminum and Boron Orthophosphate on the Setting and the Resulting Structure of Alkali Silicate Binders for Refractory ApplicationCeramics. Bd. 3. H. 1. Basel: MDPI 2020 S. 1 - 11
Henn, Isabell; Sax, Almuth; Quirmbach, Peter
Interacting Structural Analysis Methods for Characterisation of an Innovative SiOC Insulating CeramicRefractories Worldforum. Bd. 12. H. 2. Baden-Baden: Göller´ 2020 S. 46 - 49
Hopp, Vanessa; Sax, Almuth; Helmus, Dominik et al.
Adaption of the dynamic mechanical analysis to determine the gel point during the setting of liquid alkali silicatesInternational Journal of Applied Ceramic Technology. Bd. 16. H. 6. 2019 S. 2331 - 2341
Hahn, Dominik; Sax, Almuth; Quirmbach, Peter et al.
Analytical strategies to identify and quantify organic admixtures in functionalized mineral model systemsInternational Journal of Applied Ceramic Technology. Bd. 16. H. 3. 2019 S. 1111 - 1119
Quirmbach, Peter; Körber, Hartmut; Hemberger, Yannick
Thermally Induced Distinct Materials Behavior of Andalusite BricksThe American Ceramic Society (Hrsg) (Hrsg). Fifty-fifth Annual Symposium on Refractories. 1. Aufl. Aufl. St. Louis, MO. 2019 S. 148 - 159
Quirmbach, Peter; Körber, Harmut; Simmat, Ralf et al.
Automated rotary drum furnace for testing Refractories for Cement rotary kilnsThe American Ceramic Society (Hrsg) (Hrsg). 54th Annual Symposium on refractories. St. Louis. 2018 S. 110 - 124
Hahn, Dominik; Quirmbach, Peter; Sax, Almuth et al.
Identification of Organic Admixtures in Cement Dry Mix Systems Using MDRSRefractories Worldforum. Bd. 10. H. 2. Baden-Baden: Göller 2018 S. 38 - 42
Quirmbach, Peter; Sax, Almuth
Laboratory Testing Methods up to 1600 °CPoirier, Jacques; Rigaud, Michel (Hrsg). Corrosion of Refractories: Testing and Characterization Methods. 1. Aufl. Aufl. Baden-Baden: Göller-Verlag 2018 S. 1 - 22 (FIRE Compendium Series 2A)
Quirmbach, Peter; Körber, Hartmut; Simmat, Ralf et al.
Possibilities and opportunities for determining the thermal conductivity of different Refractory productsThe American Ceramic Society (Hrsg). 53rd Annual Symposium on refractories. 1. Aufl. St. Louis, MO: The American Ceramic Society 2017 S. 105 - 113
Baaske, Andreas; Fandrich, Reinhard; Pischke, Jens et al.
Refractory Products - the TC Refractories Perspectiverefractories Worldforum. Bd. 9. H. 2. Baden-Baden: Göller-Verlag 2017 S. 15 - 23
Quirmbach, Peter; Dannert, Christian
Kompetenzzentrum für feuerfeste Rohstoffe, Produkte und SystemlösungenStahl und Eisen. Bd. 9. 2016 S. 70 - 72
Clasen, Stephan; Dannert, Christian; Redecker, Lisa et al.
Methode zur Bestimmung des Reoxidationspotentials feuerfester WerkstoffeStahl und Eisen. Bd. 9. 2016 S. 37 - 41
Quirmbach, Peter; Redecker, Lisa; Sax, Almuth et al.
Possibilities to determine the Refractories influence on inclusion formation at Clean Steel productionThe American Ceramic Society (Hrsg). 52nd Annual Symposium on Refractories. 1. Aufl. Aufl. St.Louis: The American Ceramic Society 2016 S. 106 - 117
Redecker, Lisa; Sax, Almuth; Quirmbach, Peter et al.
Reactions of Secondary Phases with Carbon in Magnesia-Carbon BricksJournal of hte American Ceramic Society. Bd. 99. H. 11. 2016 S. 3761 - 3769
Clasen, Stephan; Dannert, Christian; Redecker, Lisa et al.
Experimental study to determine the reoxidation stability of refractory materialsECREF (Hrsg). UNITECR 2015. Hoehr-Grenzhausen: ECREF 2015 S. 1 - 5 Proceeding 273
Redecker, Lisa; Sax, Almuth; Quirmbach, Peter et al.
Influence of secondary phases on the carbothermic reduction in Magnesia Carbon bricksECREF (Hrsg). UNITECR 2015. Hoehr-Grenzhausen: ECREF 2015 S. 1 - 5 Proceeding 469
Dahlem, Emilie; Clasen, Stephan; Dannert, Christian et al.
Investigation of the factors influencing the bulk density and open porosity testing results for refractory materialsECREF (Hrsg). UNITECR 2015. Hoehr-Grenzhausen: ECREF 2015 S. 1 - 5 Proceeding 353
Hopp, Vanessa; Masoudi, Ali; Sax, Almuth et al.
New Approach Identifying Corrosion Effects besides Standarized Materials TestingJournal of ceramic science and technology. Bd. 6. H. 1. Baden-Baden: Göller 2015 S. 47 - 54
Quirmbach, Peter; Sax, Almuth; Dannert, Christian
New forefront Measuring Techniques for characterizing Engineered RefractoriesRefractories as Engineered Ceramics. Bd. 51st Annual Symposium on Refractories. H. 51. St. Louis, MO: The American Ceramic Society 2015 S. 20 - 29
Brochen, Erwan; Quirmbach, Peter; Volckaert, Astrid
ReStaR - Collaborative initiative in the European Refractory Sector to review and improve testing standardsECREF (Hrsg). UNITECR 2015. Hoehr-Grenzhausen: ECREF 2015 S. 1 - 3 Proceeding 198
Simmat, Ralf; Dannert, Christian; Krause, Olaf et al.
Implementation of a standard test method for abrasion resistance of refractory materials for testing at elevated temperaturesGoski, Dana ; Smith, Jeffrey D. (Hrsg). Proceedings of the Unified International Technical Conference on Refractories : UNITECR 2013. Hoboken, NJ: Wiley 2014 S. 129 - 135
Clasen, Stephan; Dannert, Christian; Quirmbach, Peter et al.
Influence of purging plug temperature and ferrostatic pressure on the infiltration of purging plugs by molten steelCzech Silicate Society (Hrsg). Proceedings Refra & Hitherm. Prag. 2014 S. 125 - 132
Quirmbach, Peter; Krause, Olaf
Integrating Education Concepts : the Koblenz region offers a one-of-a-kind infrastructure to identify and qualify specialists in order to ensure reliable and continious provision of best-skilled employees to the Refractory industryGoski, Dana ; Smith, Jeffrey D. (Hrsg). Proceedings of the Unified International Technical Conference on Refractories : UNITECR 2013. Hoboken, NJ: Wiley 2014 S. 413 - 416
Dahlem, Emilie; Clasen, Stephan; Dannert, Christian et al.
Investigation of factors influencing the bulk density and open porosity testing results of Refractory MaterialsECREF (Hrsg). Refractories for Metallurgy. Hoehr-Grenzhausen: ECREF 2014 S. 159 - 162
Krause, Olaf; Quirmbach, Peter
Koblenz University of Applied Sciences, Department of Materials Engineering, Glass and Ceramics, playing a key role in the Science and Education network for the Refractory industryGoski, Dana ; Smith, Jeffrey D. (Hrsg). Proceedings of the Unified International Technical Conference on Refractories : UNITECR 2013. Hoboken, NJ: Wiley 2014 S. 409 - 412
Zimmermann, Jörg; Krause, Olaf; Quirmbach, Peter
Wear of Monolithic Al2O3-SiC-C Refractories in the Slag Runner of a Cupola Furnacerefractories worldforum. Bd. 6. H. 1. Baden-Baden: Göller 2014 S. 85 - 90
Sax, Almuth; Quirmbach, Peter
Hydrogen Corrosion - General principles and experimental approachThe American Ceramic Society (Hrsg). 49th Annual Symposium on Refractories. 1. Aufl. St. Louis, MO: The American Ceramic Society 2013 S. 176 - 185
Brochen, Erwan; Dannert, Christian; Quirmbach, Peter
UNITECR 2013: Proceedings of the Unified International Technical Conference on Refractories. Thermo-mechanical characterisation of magnesia-carbon refractories by means of wedge splitting test under controlled atmosphere at high temperature1.0. Aufl. Hoboken, NJ: John Wiley & Sons 2013 6 S.
Quirmbach, Peter
Aktuelle Trends in der FeuerfestindustrieStahl und Eisen. Bd. 132. H. 9. 2012 S. 43 - 46
Simmat, Ralf; Dannert, Christian; Quirmbach, Peter
Combined corrosion-erosion testing of refractories for Aluminium melting furnacesInternationales Feuerfest-Kolloquium; ECReF European Centre for Refractories (Hrsg). Refractories for metallurgy. Höhr-Grenzhausen: ECREF 2012 S. 125 - 128
Quirmbach, Peter; Simmat, Ralf
Development of new procedures for combined Corrosion-Erosion testing on Refractories for Aluminum furnacesThe American Ceramic Society (Hrsg). 48th Annual Symposium on Refractories. 1. Aufl. St. Louis, MO: The American Ceramic Society 2012 S. 99 - 111
Clasen, Stephan; Quirmbach, Peter; Wuthnow, Hartmut et al.
Non-destructive testing of refractory materials by CT-based automated image analysisECREF (Hrsg). Refractories for Industrials. Hoehr-Grenzhausen: ECREF 2011 S. 80 - 84
Baaske, A.; Dübbers, D.; Fandrich, R. et al.
Refractory raw materials - developments, trends, availabilityStahl und Eisen : Zeitschrift für die Herstellung und Verarbeitung von Eisen und Stahl. Bd. 2011. H. 4. Düsseldorf: Verl. StahlEisen 2011 S. 57 - 67
Nickel, Klaus G.; Quirmbach, Peter; Pötschke, Jürgen
High temperature corrosion of ceramics and refractory materialsCottis, Robert A. (Hrsg). Shreir´s Corrosion.- Bd. 1. 4. ed. Aufl. Amsterdam: Elsevier 2010 S. 668 - 690
Krause, Olaf; Simmat, Ralf; Quirmbach, Peter et al.
Newest developments in the field of testing hot properties of refractory productsHeinrich, Jürgen G. (Hrsg). Proceedings of the 10th international conference of the European Ceramic Society (ECerS). Baden-Baden: Göller 2008 S. 1197 - 2000
Hölzgern, Michael; Quirmbach, Peter
Additives for extrusionHändle, Frank (Hrsg). Extrusion in ceramics. Berlin u.a.: Springer 2007 S. 233 - 245
Quirmbach, Peter
Chemische EigenschaftenTelle, Rainer (Hrsg). Keramik. 7., vollständig neubearb, und erw. Aufl. Aufl. Berlin u.a.: Springer 2007 S. 446 - 463
Quirmbach, Peter; Krause, Olaf; Pötschke, Jürgen
New strategies for advanced testing methods in the field of refractory productsChina's refractories. Bd. 16. Windsor [u.a.]: ECOJ 2007 S. 31 - 33
Quirmbach, Peter; Geis, Winfried; Hölzgen, Michael et al.
Organische und anorganisch-polymere AdditiveSalmang, H;., Scholze, H.; Telle, R. (Hrsg). Keramik. 7. Aufl. Berlin [u.a.]: Springer 2007 S. 517 - 526
Simmat, Ralf; Sokoll, Thomas; Quirmbach, Peter
Thermal conductivity in the range of 200 to 1600°C due to the monotonic heating methodCeramic forum international. Bd. 84. H. 9. Baden-Baden: Göller 2007 S. 11 - 13
Martin, Udo; Klöckner, Dieter; Quirmbach, Peter
Ausbrennstoffe : polymere Versatzkomponente in der SchleifmittelproduktionKeramische Zeitschrift. Bd. 58. H. 3. Düsseldorf: DVS-Verl. 2006 S. 184 - 186
Quirmbach, Peter; Schwartz, Sylvia
ELUTEC: Variable MIM-Feedstock Systems with Aqueous Debindingcfi / Ber. DKG. Bd. 81. H. 11. Köln: Göller 2004 S. 23 - 24
Vuin, Alfred; Quirmbach, Peter; Meyer, Wolfgang et al.
New Customized Additives for Spray-Drying TechnologyInterceram. Bd. 53. H. 2. 2004 S. 78 - 83
Quirmbach, Peter; Schwartz, Syvia; Magerl, Franz
Nutzung der Spritzgießtechnologie innerhalb einer modernen Geschirrfertigungcfi / Ber. DKG. Bd. 81. H. 1,2. Köln: Göller 2004 S. 9 - 13
Hölzgen, Michael; Quirmbach, Peter
Organische AdditiveKollenberg, Wolfgang (Hrsg). Technische Keramik. Essen: Vulkan-Verlag 2004 S. 345 - 350
Vuin, Alfed; Quirmbach, Peter
Prozessadditive für die wäßrige FoliengießtechnologieRoosen Andreas (Hrsg). cfi / Beihefte Verfahren der keramischen Mehrlagentechnik: Stand und Zukunftsperspektiven. Köln: DKG e.V. 2004 S. 30 - 34
Arburg, Fa; Zschimmer & Schwarz, Fa
Injection Moulding Technology in Tableware ProductionCeramic World Review. Bd. 54. 2003 S. 94 - 97
Quirmbach, Peter; Schwartz, Sylvia; Dasbach, Uwe et al.
Processing Parameters for a Continuous MIM-Production with an Aqueous Debinded 17-4PH-FeedstockArnhold, V., Chu, C.L., Jandeska, W.F., Sanderow, H.I. (Hrsg). ADVANCES in Powder Metallurgy & Particulate Materials. 10. Aufl. Princeton NJ: MPIF 2002 S. 284 - 294
Schwartz, Sylvia; Quirmbach, Peter; Kraus, Matthias
Solvent Debinding Technology for a Cointinuous 316L MIM-ProductionArnhold, V. ; Chu, C.L. ; Jandeska, W.F. ; Sanderow, H.I. (Hrsg). Advances in powder metallurgy & particulate materials - 2002: proceedings of the 2002 World Conference on Powder Metallurgy & Particulate Materials : PM2TEC 2002 World Congress, MPIF, June 16-21, Orlando. 10. Aufl. Princeton NJ: MPIF 2002 S. 147 - 155
Quirmbach, Peter; Schwartz, Sylvia; Kraus, Matthias
Correlation between different sourced rheological feedstock data for quality controlled MIM-ProductionEisen, W.B., Kassam, S. (Hrsg). ADVANCES in Powder Metallurgy & Particulate Materials. 4. Aufl. Princeton NJ: MPIF 2001 S. 57 - 66
Haas, Simone; Bohlmann, Christiane; Quirmbach, Peter
Additive für die Optimierung des DruchgießverfahrensKeram. Zeitschrift. Bd. 52. H. 5. Freiburg: Schmid 2000 S. 390 - 397
Bohlmann, Christiane; Lück, Claudia; Quirmbach, Peter
Mecanismos de Accao de Produtos Desfloculantes e Dispersantes am Pastas CeramicasKeramica. Bd. 25. H. 5,6. 2000 S. 78 - 92
Schwartz, Sylvia; Quirmbach, Peter
One-Stage Water Debinding Technology for Iron Alloy MIM-ProductionProc. Int. Conf. Powder Metallurgy & Particulate Materials. New York, NY: MPIF 2000 S. 94
Schwartz, Sylvia; Quirmbach, Peter
Water-Debinding Technology for MIM-ProductionProc. 2nd Europ. Symp. Powder Injection Moulding. München. 2000 S. 273
Bohlmann, Christiane; Quirmbach, Peter
Anmachwassereduzierung mit Additiven - ein Beitrag zur EnergiekosteneinsparungZiegelindustrie International. Bd. 51. H. 1,2. 1998. 1998 S. 35 - 44
Quirmbach, Peter; Schwartz, Sylvia
Keramischer Spritzguß (CIM): Potentielle Fertigungstechnologie in existierenden und neuen Anwendungsbereichencfi / Ber. DKG. Bd. 75. H. 1,2. Köln: Göller 1998 S. 16 - 21
Bohlmann, Christiane; Geis, Winfried; Quirmbach, Peter et al.
Setting the Plasticity Using Various Additive Systemscfi / Ber. GKG. Bd. 75. H. 1,2. Köln: Göller 1998 S. 40 - 44
Schwartz, Sylvia; Quirmbach, Peter
The SILIPLAST Binder System in Ceramic Injection MouldingInternational Ceramics. Bd. 2. 1998 S. 31 - 34
Bohlmann, Christiane; Quirmbach, Peter; Weiand, Werner
Energiekostenreduzierung mittels Optimierung der Verarbeitungseigenschaften von Zieglererzeugnissen durch Einsatz plastifizierender, wassereinsparender AdditiveInt. Baustofftagung. Band 1. Aufl. Weimar: IBAUSIL 1997 S. 945 - 957
Hebestreit, Almuth; Quirmbach, Peter; Telle, Rainer
Gas corrosion of Silicon-Infiltrated Silicon Carbide under CxOy AtmospheresFordham R.J., Baxter D.J., Graziani T. (Hrsg). Corrosion of Advanced Ceramics. Uetikon: Trans Tech Publications 1995 S. 135 - 142
Dietrichs, Peter; Quirmbach, Peter; Telle, Rainer
Hochleistungskeramiken als Teil des Werkstoffkonzepts im Bereich der MüllverbrennungProc. DKG-Jahrestagung. Bd. 1. Köln: DKG e.V. 1995 S. 121 - 124
Quirmbach, Peter; Seok, J.-W.; Telle, Rainer
Oxidation und Reoxidation Behaviour of Silicon Nitride as High Temperature MaterialsEuropean Space Agency (Hrsg). 3rd European Workshop on High Temperature Materials. ESA-WPP-104. 1995 S. 11 - 18
Quirmbach, Peter; Telle, Rainer; Mertens, Hans Peter et al.
Rheocasting - Eine Herausforderung an keramische FormwerkzeugeKeram. Zeitschrift. Bd. 11. 1995 S. 891 - 897
Quirmbach, Peter; Rau, Simone; Dillinger, Roland et al.
Schmelzkorrosionsuntersuchungen an AlTiO5 zur Bauteilbegutachtung für den Einsatz in der Al-SchmelzmetallurgieStahl und Eisen. Bd. 10. Düsseldorf: Stahl und Eisen 1995 S. 124
Quirmbach, Peter; Schäfer, Ulrike; Nickel, Klaus G. et al.
Destruktionsmechanismen bei der Hochtemperaturgaskorrosion von SSiCGefüge und Eigenschaften metallischer und nichtmetallischer Werkstoffe : Berichte der Metallographie-Tagung Aachen, 29. September bis 1. Oktober 1992. München: Hanser 1994 S. 167 - 179 (Praktische Metallographie / Sonderbände der praktischen Metallographie ; 25)
Telle, Rainer; Quirmbach, Peter
Korrosion und Verschleiß von keramischen Werkstoffen : kombinierte Belastungsfälle als Anwendungsgrenze ; Vortragstexte eines DGM/DKG Statusseminars vom 15. - 17.03.1994 in AachenKöln: Dt. Keramische Gesellschaft 1994 359 S.
Quirmbach, Peter; Würleitner, Georg; Seok, J.W.
Oxidationsuntersuchungen an Si3N4 in wasserdampfhaltigen AtmosphärenTelle Rainer ; Quirmbach P. (Hrsg). Korrosion und Verschleiß von keramischen Werkstoffen : kombinierte Belastungsfälle als Anwendungsgrenze. Köln: DKG 1994 S. 72 - 76 (Keramik in Wissenschaft und Praxis)
Telle, Rainer; Nickel, Klaus G.; Quirmbach, Peter
Standardisierung von Prüfmethoden für Korrosion und Verschleiß keramischer WerkstoffeTelle Rainer ; Quirmbach Peter (Hrsg). Korrosion und Verschleiß von keramischen Werkstoffen : kombinierte Belastungsfälle als Anwendungsgrenze. Köln: DKG 1994 S. 347 - 352
Nickel, Klaus G.; Fu-Rudolph, Zhe; Quirmbach, Peter
High Temperature Oxidation and Corrosion of Engineering CeramicsJ. Eng. Turbines and Power. Bd. 115. 1993 S. 76 - 82
Quirmbach, Peter; Nickel, Klaus G.; Petzow, Günter
Hochtemperaturgaskorrosion von SSiCDeutsche Keramische Gesellschaft (Hrsg). Proc. Jahrestagung. Köln: DKG e.V. 1993 S. 111 - 113
Quirmbach, Peter; Wolf, Martin; Brook, Richard et al.
Development of Microstructure during Pressureless Sintering of AluminaJ. Europ. Ceram. Soc. Bd. 10. 1992 S. 51 - 57
Quirmbach, Peter; Morgan, Thomas J.P.; Nickel, Klaus G. et al.
Oxidation of Silicon Carbide in Carbon MonoxideZiegler, G. ; Hausner H. (Hrsg). Structural ceramics and composites. Köln: Dt. Kermaische Ges. 1992 S. 1333 - 1337 (Euro-ceramics ; 2,2)
Quirmbach, Peter; Nickel, Klaus G.; Brook, Richard J. et al.
Actice Corrosion Kinetics of SSiC at High TemperaturesAmerican Ceramic Society (Hrsg). Proc. Ann. Meet. ACerS. Cincinnati OH. 1991 S. 30
Nickel, Klaus G.; Quirmbach, Peter
Gaskorrosion nichtoxidischer keramischer WerkstoffeJochen Kriegesmann (Hrsg). Technische Keramische Werkstoffe. Köln: Deutscher Wirtschaftsdienst 1991 S. 1 - 76 5.4.1.1.
Nickel, Klaus G.; Quirmbach, Peter; Petzow, Günter
SiC als Dieselrußfilter: Probleme der KorrosionsbeständigkeitDKG e.V. (Hrsg). ENVICERAM ´91 - Keramik im Umweltschutz. Köln: DKG e.V. 1991 S. 21 - 24
Nickel, Klaus G.; Quirmbach, Peter; Petzow, Günter
Gas corrosion of SiC in C-H-O environments at Very High TemperaturesWerkstoffe und Korrosion. Bd. 41. 1990 S. 726 - 727
Nickel, Klaus G.; Quirmbach, Peter; Petzow, Günter
High Temperature Corrosion of SiC in C-H-O EnvironmentsAmerican Ceramic Society (Hrsg). Proc. Ann. Meet. ACerS. 92. Aufl. Dallas TX. 1990 S. 316