FB bauen-kunst-werkstoffe
Hochschule Koblenz
- 0261/9528-600
- 0261/9528-647
Anders, Udo; Enke, Daniel; Usinger, Barbara
Bildungsgangmanagement und Strukturierung des Präsenzunterrichts in Tischlerklassen durch digitale Lehr-Lernsituationen mit der Lernplattform „Moodle“Journal of Technical Education (JOTED): Book of Abstracts zum 8. Technikdidaktik-Symposium. Bd. 12. H. 1. 2024 S. 21 - 22
Kasper, J.; Krause, O.; Dannert, C.
Formation of green strength in hydraulically bonded refractory castables at room temperatureOpen Ceramics. Bd. 18. Elsevier BV 2024 S. 100595
Holleyn, Florian; Klein, Lee; Zimmer, Sinje et al.
Adaption of the contour-crafting process to refractories and investigation of material properties after the 3D printing processDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 163 - 166
Krause, Olaf
Bachelor of ceramic science (dual) at Koblenz University of Applied Sciences : an opportunity for the industry to overcome skills shortageDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 731 - 733
Anders, Udo; Usinger, Barbara
Digitalisierung des Präsenzunterrichtes in der Tischler*innenausbildungBAG Report : Bau, Holz, Farbe. Bd. 25. H. 2. 2023 S. 38 - 49
Bastian, Marcel; Sollbach, Maren; Kasper, Johannes et al.
How the composition of self-flowing refractory castables influences their rheological propertiesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 155 - 158
Zimmer, Sinje; Kehren, Johannes; Krause, Olaf
In situ high-temperature raman spectroscopy : a powerful toll for studying refractory materialsDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 736 - 739
Noll, B.; Stein, T.; Krause, O. et al.
Influence of deflocculants on the cement hydrate phase formation and technological properties of CAC-bonded castables during the first heating processOpen Ceramics. Bd. 16. Amsterdam: Elsevier 2023 S. 100435
Ibarra Plata, L. T.; Thiesen, M.; Krause, Olaf et al.
Influence of sintering additives and sol-gel bonding agents on workability and flexural strength of cement influence of sintering additives free castablesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 146 - 148
Erbar, Laura; Sarnow, Katharina; Krause, Olaf et al.
Investigation of the influence of impurities typical in secondary raw materials on the behavior of high alumina castables – Part 1: Design of the castables, setting properties and high temperature fracture behaviorOpen Ceramics. Bd. 2023. Elsevier 2023 S. 100460
Abdelouhab, S.; Lang, C.; Delmotte, C. et al.
Investigation of the milling route for the development of colloidal suspensions to be used as binder in refractory castablesOpen Ceramics. Bd. 15. Amsterdam: Elsevier 2023 S. 100394
Podwórny, Jacek; Dudek, Karolina; Kujawa, Magdalena et al.
Investigation of the role of impurities typical in secondary raw materials on the behaviour of high alumina castables - Part II: Influence on thermomechanical behaviourOpen Ceramics. Bd. 2023. Amsterdam: Elsevier 2023 S. 100436
Brochen, Erwan; Kaminski, Michael; Dannert, Christian et al.
Investigation of the simultaneous influence of mechanical loading and thermal gradient as occurring in recfractory linings on the refractory microstructure and physical propertiesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 748 - 751
Koch, Alexandra; Krause, Olaf; Steffen, Tobias et al.
Knowledge about the carbon deposition in the microstructure of refractory materialsDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 848 - 851
Bastian, Marcel; Kasper, Johannes; Dannert, Christian et al.
New method for the determination of the dynamic viscosity of castablesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 228 - 231
Stein, Thekla; Krause, Olaf; Taute, Wolfgang et al.
Online drying monitoring system for refractory castablesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 179 - 182
Krause, Olaf; Pokhrel, A.; Ibarra Plata, L. T. et al.
Rheology of refractory castables - part 1 : A novel 3D spread flow measuring device allows to determine more precisely the workability of refractory castablesDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 232 - 235
Krause, Olaf; Pokhrel, A.; Ibarra Plata, L. T. et al.
Rheology of refractory castables - part 2 : Influence of the mixing energy input in terms of mixing time and velocity on the spread measured with a new 3D-spread-flow device with special regard towards the ambient working conditionsDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 240 - 243
Kehren, J.T.; Steffen, T.; Hauke, M. et al.
The influence of firing parameters on the formation of nitride phases in nitride bonded silicon carbidesOpen Ceramics. Bd. 15. Amsterdam: Elsevier 2023 S. 100416
Steffen, T.; Dannert, C.; Koch, A. et al.
The influence of the gas permeability of refractory materials on carbon deposition in co containing atmospheresDeutsche Feuerfest-Industrie e.V. (DFFI) (Hrsg). Proceedings : The Carbon Challenge ; Steps and leaps to master the future. Frankfurt am Main. 2023 S. 852 - 855
Schuster, Alexander; Schulz, Josef; Fischer, Simon et al.
Analysis of pore morphology in oxide electroceramics by automatic image analysisPractical Metallography. Bd. 59. H. 5. 2022 S. 251 - 268
Schuster, Alexander; Stolz, Johannes; Liersch, Antje
Analysis of the influence of pore morphology and second phase on the dielectric breakdown strength (DBS) of Bayer aluminaKERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
Schuster, Alexander; Piribauer, Christoph; Stolz, Johannes et al.
Artificial intelligence-supported analysis of the porosity of functional ceramic microstructures using optical image segmentationKERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
Schulz, Josef; Emmel, Marcus; Liersch, Antje et al.
Ceramic multi material vat photopolymerization of alumina and zirconiaKERAMIK/Ceramics 2022 : 07.-09.03.2022 ; 97. DKG-Jahrestagung. o. A. 2022
Kasper, Johannes; Krause, Olaf; Quirmbach, Peter
Developing Setting Models for PCE-dispersed and CA-Cement-bonded Refractory CastablesRefractories Worldforum. Bd. 14. H. 1. Baden-Baden: Goeller-Verlag 2022 S. 38 - 44
Abdelouhab, Sandra; Delmotte, Cathy; Lang, Charlotte et al.
Development of a boehmite colloidal suspension as new binder for refractory castables65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 10 - 14
Koch, A.; Krause, Olaf; Steffen, T. et al.
Growth and development of carbon nanotubes in cement bonded refractory materials65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 157 - 161
Noll, B.; Stein, T.; Krause, Olaf et al.
Influence of deflocculants on the cement hydrate phase formation and their impact on the technological properties of cac bonded castables65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 141 - 145
Simmat, R.; Dannert, C.; Noll, B. et al.
Influence of deflocculants on the drying behaviour of calcium aluminate bonded refractory castables65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 137 - 140
Brochen, Erwan; Dannert, Christian; Paul, Juliane et al.
Investigation of fracture behavior of typical refractory materials up to service temperaturesInternational Journal of Ceramic Engineering & Science. Bd. 4. H. 2. Wiley 2022 S. 68 - 76 online
Hauke, K.; Simmat, R.; Kaminski, M. et al.
Investigations of alkali corrosion in a temperature gradient by a unique corrosion test setup65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 162 - 165
Hadian, Amir; Fricke, Maximilian; Liersch, Antje et al.
Material extrusion additive manufacturing of zirconia parts using powder injection molding feedstock compositionsAdditive Manufacturing. Bd. 57. Elsevier 2022 S. 102966
Bastian, M.; Kasper, J.; Dannert, C. et al.
Measurement of the dynamic viscosity of refractory castables : interaction between slurry and aggregates65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 49 - 52
Klein, G.
Nachweis der Hydratphasenbildung im Steingut als Phänomen der FeuchtigkeitsdehnungKeramische Zeitschrift. Bd. 74. H. 2. Springer 2022 S. 38 - 47
Thomas, Noel
Phase transitions and (p-T-X) behaviour of centrosymmetric perovskites: modelling with transformed crystallographic dataActa crystallographica / International Union of Crystallography. Section B, Structural science, crystal engineering and materials. Bd. 78. H. 1. International Union of Crystallography 2022 S. 40 - 60
Klein, Lee; Holleyn, Florian; Zimmer, Sinje et al.
Research and development of new 3D printing technologies and adaptation of the contour-crafting process to refractories - Part I : Basics of the printing process and contour-crafting setup65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 178 - 182
Holleyn, Florian; Klein, Lee; Zimmer, Sinje et al.
Research and development of new 3D printing technologies and adaptation of the contour-crafting process to refractories - Part II : Castable development65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 183 - 187
Zimmer, Sinje; Klein, Lee; Holleyn, Florian et al.
Research and development of new 3D printing technologies and adaptation of the contour-crafting process to refractories - Part III : In situ raman spectroscopy of refractory castables65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 188 - 192
Steffen, T.; Dannert, C.; Fischer, J. et al.
Testing the co resistance of refractory materials : a new technological approach to deliver reliable results in shorter testing times65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 34 - 37
Paul, J.; Krause, Olaf; Erbar, L. et al.
The informative value of crucible tests for alkali corrosion in refractory castables65th International Colloquium on Refractories 2022 : The future transformation of the process industry ; September 28th and 29th, 2022. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2022 S. 166 - 170
Klein, Lee; Holleyn, Florian; Zimmer, Sinje et al.
3DK Competence Center Investigates the Potentials of Contour CraftingInterceram : international ceramic review. Bd. 70. H. 4. Wiesbaden: Springer 2021 S. 28 - 35
Kasper, J.; Dannert, C.; Koch, A. et al.
Dispersion and stiefening behavior of matrixsuspensions of refractory castables in the presence of impurieties64th International Colloquium on Refractories 2021 : REFRACTORIES in the global value chain ; September 29th and 30th, 2021. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2021 S. 81 - 84
Klein, G.
Gewinnung einer Tonerde aus einem tonmineralhaltigen RohstoffKeramische Zeitschrift. Bd. 73. H. 2. Wiesbaden: Springer 2021 S. 44 - 51
Klein, Lee; Holleyn, Florian; Zimmer, Sinje et al.
Kompetenzzentrum 3DK erforscht Potenziale des Contour-CraftingsKeramische Zeitschrift. Bd. 73. H. 4-5. Wiesbaden: Springer 2021 S. 34 - 41
Hadian, Amir; Koch, Leonard; Koberg, Philipp et al.
Material extrusion based additive manufacturing of large zirconia structures using filaments with ethylene vinyl acetate based binder compositionAdditive Manufacturing. Bd. 47. Elsevier 2021 S. 102227
Fricke, Maximilian; Thomas, Noel
Modelling the structural variation of quartz and germanium dioxide with temperature by means of transformed crystallographic dataActa crystallographica / International Union of Crystallography. Section B, Structural science, crystal engineering and materials. Bd. 77. H. 3. Oxford: Wiley 2021 S. 427 - 440
Bastian, M.; Dannert, C.; Kehren, J. et al.
Oxidation of SI3N4 bonded SiC : how chemical composition and pore parameters influence the oxidation behaviour64th International Colloquium on Refractories 2021 : REFRACTORIES in the global value chain ; September 29th and 30th, 2021. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2021 S. 49 - 52
Holleyn, F.; Klein, L.; Krause, Olaf
Proper mixing is a still undervalued key issue for targeted development and fabrication of refractory monolithics for reproducible material properties64th International Colloquium on Refractories 2021 : REFRACTORIES in the global value chain ; September 29th and 30th, 2021. Höhr-Grenzhausen: ECREF European Centre for Refractories gemeinnützige GmbH 2021 S. 68 - 71
Kasper, J.; Dannert, C.; Koch, A. et al.
Setting properties of refractory model castables : influence of impurities on coagulation and hydration. A case study based on the addition of traces of MgCl2Refractories worldforum : manufacturing & performance of high-temperature materials. Bd. 2021. H. 3. Baden-Baden: Göller 2021 S. 50 - 58
Holleyn, F.; Krause, Olaf; Erbar, L. et al.
Cement free refractory castables for waste and biomass incineration : silicon carbide raw material characterization, fabrication process and properties63rd international Colloquium on Refractories ; 16–17 September 2020. online: ICR® 2020 S. 18 - 22
Brochen, E.; Dannert, C.; Holleyn, F. et al.
Correlation between the high temperature thermal shock resistance of cement and colloidal silica bonded high alumina refractory castables and their thermomechanical properties63rd international Colloquium on Refractories ; 16–17 September 2020. online: ICR® 2020 S. 73 - 79
Clemens, Frank; Schulz, Josef; Gorjan, Lovro et al.
Debinding and Sintering of Dense Ceramic Structures Made with Fused Deposition ModelingMeboldt, M.; Klahn, C. (Hrsg). Industrializing additive manufacturing : Proceedings of AMPA2020, presented at the AMPA 2020 ; International conference on additive manufacturing in products and applications ; Zürich, Switzerland, September 1-3, 2020. Cham: Springer 2020 S. 293 - 303
Simmat, R.; Dannert, C.; Erbar, L. et al.
Influence of Additives on the Crystallization and Dehydration of Calcium-Aluminate-Hydrate Phases in Refractory Castables63rd international Colloquium on Refractories ; 16–17 September. online: ICR® 2020 S. 61 - 65
Koch, A.; Krause, Olaf; Kasper, J. et al.
Influence of recycled refractory raw materials on the coagulation and setting behavior of CAC-bonded refractory castables63rd international Colloquium on Refractories ; 16–17 September. online: ICR® 2020 S. 23 - 26
Klein, Gernot; Bastian, M.; Kasper, J. et al.
New Approach for the Determination of the Shear Rate Dependant Viscosity of Refractory CastablesRefractories worldforum : manufacturing & performance of high-temperature materials. Bd. 2020. H. 9. 2020 S. 52 - 56
Bastian, M.; Dannert, C.; Kehren, J. et al.
Novel insights into the oxidation mechanism of NSiC – Influence of pore characteristics63rd international Colloquium on Refractories ; 16–17 September 2020. online: ICR® 2020 S. 119 - 123
Barakat, A.J.; Pel, L.; Adan, O.C.G. et al.
The effect of permeability enhancement on dry-out behavior of CA- and microsilica gel-bonded castables as determined by NMRCeramics International : CI ; the internat. journal of ceramics. Bd. 2020. Amsterdam: Elsevier Science 2020 online first
Kehren, J.; Zimmer, S. U.; Krause, Olaf et al.
The influence of open porosity and Si3N4 morphology on the oxidation resistance of nitride bonded silicon carbides (NSiC) – studied by scanning electron microscopy63rd international Colloquium on Refractories ; 16–17 September. online: ICR® 2020 S. 133 - 136
Eisermann, Dagmar
Werkbuch : Raum - Programm - Tektonik ; Übungen für Auge, Hand und Kopf ; Einführung in das architektonische EntwerfenKoblenz: Eigenverlag 2020 136 S.
Krause, Olaf; Podwórny, J.; Dudek, K. et al.
Anomalous thermo-mechanical behaviour of sol-gel bonded alumina castables under cyclic heating and cooling conditionsECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 95 - 101
Eisermann, Dagmar; Moahloli, Tselisio
ARCHITECTURE FOR DEVELOPMENT GERMAN - SOUTH AFRICAN INTERNTIONAL STUDIO '19 workshop - a station for a daily hazardKoblenz: Eigenverlag, E-Book, https://cloud.hs-koblenz.de/s/JKtRH2J6zPjWfFb 2019 76 S.
Barakat, Ahmed J.; Pel, Leo; Krause, Olaf et al.
Direct observation of the moisture distribution in calcium aluminate cement and hydratable alumina‐bonded castables during first‐drying : An NMR studyJournal of the American Ceramic Society. Bd. 2019. Wiley 2019 1
Krause, Olaf; Kasper, J.; Dannert, C. et al.
Impact of Ca2+ dissolution from cac on the stability of matrix suspensions of deflocculated refractory castables : from mixing to the first settingECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 34 - 38
Krause, Olaf; Erbar, L.; Steffen, T. et al.
Impact of cubic-shaped grain fractions on the explosion resistance of high-alumina castablesECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 77 - 80
Krause, Olaf; Zimmer, Sinje; Hauke, Kerstin et al.
In situ hyperspectral raman imaging of the time-dependent mineral phase evolution in calcium aluminate cements (cac) after the addition of waterECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 171 - 175
Krause, Olaf; Erbar, Laura; Ulbrich, C. et al.
Influence of Additives on the Crystallization and Dehydration of Calcium-Aluminate-Hydrate Phases – Part I: The Change of Hydrate Phase Formation as a Function of Surface-active Substances in Refractory Castables Investigated by Field Emission Scanning Electron MicroscopyProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 916 - 920
Krause, Olaf; Simmat, R.; Dannert, C. et al.
Influence of Additives on the Crystallization and Dehydration of Calcium-Aluminate-Hydrate Phases in Refractory Castables : Part II ; Dehydration Observed by Monotonic HeatingProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 921 - 924
Krause, Olaf; Brochen, E.; Dannert, C. et al.
Influence of the particle shape on the thermomechanical properties of high alumina castables at high temperatureECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 53 - 56
Krause, Olaf; Schwarz, B.
Koblenz University of Applied Science, Department of Materials Engineering, Glass and Ceramics Launched a Praxis-integrated Bachelor-degree ProgrammeProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 472 - 475
Krause, Olaf; Brochen, Erwan; Dannert, Christian et al.
Matrix design in high alumina refractory castables : Part II ; Assessment of the brittle-ductile transition temperature and ways to influence itProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 601 - 604
Krause, Olaf; Holleyn, Florian; Brochen, Erwan et al.
Matrix design in high-alumina refractory castables : Part I ; Enhanced sintering at low temperatures in service, long-term investigations and microstructure evolutionProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 597 - 600
Krause, Olaf; Holleyn, F.; Brochen, E. et al.
Microstructure evolution and enhanced sintering of high-alumina refractory castables with a smart matrix at service conditionsECREF : European Centre for Refractories (Hrsg). 62nd International Colloquium on Refractories 2019 : September 28th and 29th, 2019, EUROGRESS, Aachen, Germany. Aachen: ECREF gemeinnützige GmbH 2019 S. 86 - 89
Krause, Olaf; Kehren, J.
New Insights into the Nature of Bond in Refractory Materials Using Soft X-Ray Emission Spectroscopy for SEM ApplicationsProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 912 - 915
Krause, Olaf; Stein, T.
Radar Based Investigation of the Decomposition of Hydrate Phases in Calcium Alumina ConcreteProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 933 - 936
Krause, Olaf; Kasper, Johannes; Dannert, Christian et al.
Recycled Raw Materials in Refractory Castables – Part 1/3 : Water Soluble Ions from Recycled Refractory Raw Materials in Alkaline SolutionProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 309 - 312
Krause, Olaf; Kasper, Johannes; Dannert, Christian et al.
Recycled Raw Materials in Refractory Castables – Part 2/3 : Influence of Water Soluble Ions from Recycled Refractory Raw Materials on the Dispersion and Coagulation of the Matrix Suspension of CAC-bonded Refractory CastablesProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 313 - 316
Krause, Olaf; Koch, Alexandra; Dannert, Christian et al.
Recycled Raw Materials in Refractory Castables – Part 3/3 : Influence of Watersoluble Ions from Recycled Refractory Raw Materials on the Coagulation and Hydration Velocity of CAC-bonded Refractory CastablesProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 317 - 320
Krause, Olaf; Erbar, Laura; Steffen, Tobias et al.
Splintered versus Cubic Gains in High Alumina Castables – Part I : Examination of the Impact of the Particle Shape on the Explosion ResistanceProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 73 - 76
Krause, Olaf; Abdelouhab, Sandra; Pilate, Pascal et al.
Splintered versus Cubic Grains in High Alumina Castables – Part II : Influence of Aggregate Shapes on Thermomechanical and Microstructural Changes during the Initial Heat-upProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 77 - 80
Krause, Olaf; Brochen, Erwan; Sollbach, Maren et al.
Splintered versus cubic grains in high alumina castables : Part III ; Assessment of the tendency for failure in the wear lining of a modelled steel ladle using the Drucker-Prager failure criterionProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 81 - 84
Krause, Olaf; Zimmer, Sinje; Hauke, Kerstin et al.
Time-dependent Changes of the Mineral Population in Calcium Aluminate Cements (CAC) after the Addition of Water Studied In Situ with Hyperspectral Raman ImagingProceedings of the Unified International Technical Conference on Refractories (UNITECR 2019) : a collection of papers presented during the 16th Biennial Worldwide Congress of Refractories, October 13-16, 2019, Yokohama, Japan. Yokohama. 2019 S. 925 - 928
Klein, Gernot
Bewertung und Charakterisierung einer Pegmatitlagerstätte in Südafrika und Einsatz dieses Rohstoffs für einen silikatkeramischen WerkstoffKeramische Zeitschrift. Bd. 70. H. 1-2. Wiesbaden: Springer 2018 S. 36 - 47
Krause, Olaf; Brochen, E.; Dannert, C. et al.
Combining the uniaxial compression and diametrical compression tests to derive an improved failure criterion for refractories up to high temperaturesEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 178 - 182
Gorjan, Lovro; Reiff, Lukas; Liersch, Antje et al.
Ethylene vinyl acetate as a binder for additive manufacturing of tricalcium phosphate bio-ceramicsCeramics International : CI ; the internat. journal of ceramics. Bd. 44. H. 13. Amsterdam: Elsevier 2018 S. 15817 - 15823
Krause, Olaf
Flexibilitätsoptionen in der Grundstoffindustrie : Methodik, Potenziale, Hemmnisse1. Aufl. Frankfurt am Main: DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. 2018 250 S.
Schönbeck, Matthias A.
Handwerk und Baukultur : Eine vergessene Beziehung.Baabe-Meijer, S./Kuhlmeier, W./Meyser, J. (Hrsg). Trends beruflicher Arbeit : Digitalisierung, Nachhaltigkeit, Heterogenität ; Ergebnisse der Fachtagung Bau, Holz, Farbe und Raumgestaltung 2017. Norderstedt: Books on Demand GmbH 2018 S. 275 - 291
Krause, Olaf; Podwórny, J.; Dudek, K. et al.
High temperature phase transformations in the matrix of high-alumina monolithicsEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 44 - 48
Krause, Olaf; Tischer, D.
How to Investigate the Setting Kinetics of Refractory Castables : A Review of Methods and Their Relevancy for Technical UseChina's refractories. Bd. 27. H. 3. Beijing: English China Online Journals 2018 7 Seiten
Krause, Olaf; Erbar, L.; Brochen, E. et al.
Impact of cubic-shaped grain fractions on the working properties and green strength of high-alumina castablesEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 206 - 209
Holleyn, F.; Krause, Olaf; Odziomek, M. et al.
Improved sintering due to an intelligent matrix design of high-alumina refactory monolithics that is adjusted to the service conditionsEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 37 - 40
Reifenberg, Melina; Thomas, Noel
Ionic network analysis of tectosilicates : the example of coesite at variable pressureActa Crystallographica : Section B ; Structural Science, Crystal Engineering and Materials. Bd. 74. H. 2. Oxford: Wiley-Blackwell 2018 S. 165 - 181
Krause, Olaf; Ulbrich, C.; Stein, T. et al.
Modification of the morphology of cement hydrate phases by using surface reactive substancesEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 87 - 91
Schönbeck, Matthias A.; Jan, Rittgen
Motive der positiven Entscheidung zur Ergreifung einer bautechnischen AusbildungBAG-Report : Bau, Holz, Farbe Hamburg. Bd. 20. H. 2. Berlin: Der @Vorstand d. BAG Bau-Holz-Farbe 2018 S. 38 - 42
Krause, Olaf; Ulbrich, C.; Stein, T.
Radar technology based investigation on the formation of hydrate phases in refractory concreteEuropean Centre for Refractories (Hrsg). Aachen proceedings : International Colloquium on Refractories ; Refractories enabling High Temperature Technologies. Freiburg, Br.: Schmid 2018 S. 97 - 100
Ismail, Muhammad Fraz; Bogacki, Wolfgang
Scenario approach for the seasonal forecast of Kharif flows from the Upper Indus BasinHydrology and Earth System Sciences : HESS. Bd. 22. H. 2. Göttingen: Copernicus Publ. 2018 S. 1391 - 1409
Brochen, Erwan; Dahlem, Emilie; Dannert, Christian et al.
A Contribution to the Understanding of the Failure Mechanism of High Alumina Refractory Castables under Practice-Oriented Thermal Shock ConditionsUnified International Technical Conference on Refractories (UNITECR) 2017. Santiago de Chile. 2017 S. 297 - 300 O78
Ulbrich, C.; Klein, G.
Betrachtungen zur gezielten Steigerung der mechanischen Festigkeit eines silikatkeramischen Werkstoffs in Abhängigkeit der Ausbildung des WerkstoffgefügesKeramische Zeitschrift. Bd. 69. H. 6. Wiesbaden: Springer 2017 S. 146 - 154
Krause, Olaf; Holleyn, Florian; Kasper, Johannes et al.
CAC bond refractory castables : When does the hydraulic reaction take place in LC-castables?Materiały Ceramiczne / Ceramic Materials. Bd. 69. H. 3. Katowice: Polskie Towarzystwo Ceramiczne 2017 S. 192 - 197
Thomas, Noel
Crystal structure prediction by ionic network analysis: the example of (p-T-X)-structure relationships in olivinesActa Crystallographica : Section B ; Structural science, crystal engineering and materials. Bd. 73. H. 1. Oxford [u.a.]: Wiley-Blackwell 2017 S. 74 - 86
Schönbeck, Matthias A.
Der Kopf lernt mit der Hand : händisches Zeichnen in digitalisierten LernumgebungenKammasch, Gudrun; Petzold, Jürgen (Hrsg). Digitalisierung in der Techniklehre - Ihr Beitrag zum Profil technischer Bildung : Wege zu technischer Bildung. Berlin: IPW 2017 S. 263 - 270