Dr.-Ing. Sebastian Schmeer - Publikationen

Rehra, Jan; Jungbluth, Julia; Katri, Bilal et al.
Damage and failure mechanisms of hybrid carbon fiber and steel fiber reinforced polymer composites
Composites Part A: Applied Science and Manufacturing. Bd. 185. Elsevier B.V. 2024 108366

Erdem, Ali O.; Stannek, Paul; Grundler, Marco et al.
Development of fiber reinforced compound bipolar foils for fuel cells
Journal of Energy: Energija. Bd. 72. H. 3. International Council on Large Electric Systems 2024 S. 22 - 28

Andriß, Christian; Kenf, Andreas; Schmeer, Sebastian
Experimental characterization and phenomenological modeling of nonlinear viscoelasticity, plasticity and damage of continuous carbon fiber-reinforced thermoplastics
Composites Part B: Engineering. Bd. 259. Elsevier B.V. 2023 110734

Donhauser, Tobias; Kenf, Andreas; Schmeer, Sebastian et al.
Calculation of highly stressed components made of carbonfiber-reinforced polyamide-6
Composite Structures. Bd. 280. Elsevier B.V. 2022 S. 114830

Andriß, Christian; Kenf, Andreas; Donhauser, Tobias et al.
Characterization and modeling of continuous carbon fiber-reinforced polycarbonate under multiaxial loads
Composites Part B: Engineering. Bd. 235. Elsevier B.V. 2022 109740

Rehra, Jan; Andriß, Christian; Schmeer, Sebastian et al.
Describing the Material Behavior of Steel and Carbon Fiber Reinforced Composites Using a Combined Damage-Plasticity Approach
Journal of Composites Science: Multifunctional Composite Structures. Bd. 6. H. 8. MDPI AG 2022 S. 235

Bauer, Philipp; Motsch-Eichmann, Nicole; Schmeer, Sebastian et al.
Hybrid Thermoset-Thermoplastic Structures: An in-depth study on plasma pretreated continuous fiber-reinforced epoxy specimens
Composites Part C: Open Access. Bd. 8. Elsevier BV 2022 100281

Khatri, Bilal; Rehra, Jan; Schmeer, Sebastian et al.
Metal/Carbon-Fiber Hybrid Composites—Damage Evolution and Monitoring of Isothermal Fatigue at Low and Elevated Temperatures
Journal of Composites Science. Bd. 6. H. 3. MDPI AG 2022 67

Almazán-Lázaro, Juan-Antonio; López-Alba, Elías; Schmeer, Sebastian et al.
Enhanced Low-Velocity Impact Properties for Resin Film Infusion-Manufactured Composites by Flow-Control Approach
Polymers. Bd. 13. H. 19. MDPI AG 2021 3431

Mehl, Konstantin; Schmeer, Sebastian; Motsch-Eichmann, Nicole et al.
Structural Optimization of Locally Continuous Fiber-Reinforcements for Short Fiber-Reinforced Plastics
Journal of Composites Science. Bd. 5. H. 5. MDPI AG 2021 S. 118

Santos, Alberto L.; Nakazato, Roberto Z.; Schmeer, Sebastian et al.
Influence of anodization of aluminum 2024 T3 for application in aluminum/Cf/ epoxy laminate
Composites Part B: Engineering. Bd. 184. Elsevier Ltd. 2020 S. 107718

Mischo, Florian; Goergen, Christian; Schmeer, Sebastian et al.
Use of recycled carbon staple fibers in an advanced thermoforming process and analysis of its crash performance
Advanced Manufacturing: Polymer & Composites Science. Bd. 6. H. 1. Informa UK Limited 2020 S. 48 - 56

Kühn, Florian; Rehra, Jan; May, David et al.
Dry fiber placement of carbon/steel fiber hybrid preforms for multifunctional composites
Advanced Manufacturing: Polymer & Composites Science. Bd. 5. H. 1. Informa UK Limited 2019 S. 37 - 49

Schneider, Dominik; Schumacher, Axel; Donhauser, Tobias et al.
Flexible Graph Syntax for the Topology Optimization of Crashworthiness Profile Structures Made from Thermoplastic Composites
Key Engineering Materials. Bd. 809. Trans Tech Publications, Ltd. 2019 S. 493 - 499

Rehra, Jan; Hannemann, Benedikt; Schmeer, Sebastian et al.
Approach for an Analytical Description of the Failure Evolution of Continuous Steel and Carbon Fiber Hybrid Composites
Advanced Engineering Materials. Bd. 21. H. 6. Wiley 2018 S. 1800565

López-Alba, Elías; Schmeer, Sebastian; Díaz, Francisco
Energy Absorption Capacity in Natural Fiber Reinforcement Composites Structures
Materials. Bd. 11. H. 3. MDPI AG 2018 S. 418

Backe, S.; Balle, F.; Hannemann, B. et al.
Fatigue properties of multifunctional metal- and carbon-fibre-reinforced polymers and intrinsic capabilities for damage monitoring
Fatigue & Fracture of Engineering Materials & Structures. Bd. 42. H. 1. Wiley 2018 S. 143 - 151

Felipe-Sesé, Luis; López-Alba, Elías; Hannemann, Benedikt et al.
A Validation Approach for Quasistatic Numerical/Experimental Indentation Analysis in Soft Materials Using 3D Digital Image Correlation
Materials. Bd. 10. H. 7. MDPI AG 2017 S. 722

Jung, Gihune; Schmeer, Sebastian; Mitschang, Peter
Crash behaviour and performance of long fibre reinforced thermoplastic material in comparison with continuous fibre reinforcement
International Journal of Crashworthiness. Bd. 23. H. 4. Informa UK Limited 2017 S. 433 - 445

Hannemann, B.; Backe, S.; Schmeer, Sebastian et al.
Hybridisation of CFRP by the use of continuous metal fibres (MCFRP) for damage tolerant and electrically conductive lightweight structures
Composite Structures. Bd. 172. Elsevier B.V. 2017 S. 374 - 382

Utzig, Lukas; Karch, Christian; Rehra, Jan et al.
Modeling and simulation of the effective strength of hybrid polymer composites reinforced by carbon and steel fibers
Journal of Materials Science. Bd. 53. H. 1. Springer Science and Business Media LLC 2017 S. 667 - 677

Heberger, Lukas; Kirsch, Benjamin; Donhauser, Tobias et al.
Influence of the Quality of Rivet Holes in Carbon-fiber-reinforced-polymer (CFRP) on the Connection Stability
Procedia Manufacturing. Bd. 6. Elsevier B.V. 2016 S. 140 - 147

Hannemann, B.; Schmeer, Sebastian; Breuer, Ulf et al.
Metal and carbon united: Electrical function integration
Breuer, Ulf Paul (Hrsg). Commercial Aircraft Composite Technology. Cham: Springer International Publishing 2016 S. 220 - 234

Hannemann, B.; Backe, S.; Schmeer, S. et al.
Metal fiber incorporation in carbon fiber reinforced polymers (CFRP) for improved electrical conductivity
Materialwissenschaft und Werkstofftechnik. Bd. 47. H. 11. Wiley 2016 S. 1015 - 1023

Netz, Johannes; Hannemann, Benedikt; Schmeer, Sebastian
Micro-leveled modeling of structural stitched FRP joints as energy absorbing rupture points
Composite Structures. Bd. 157. Elsevier B.V. 2016 S. 131 - 140

López-Alba, E.; Felipe-Sesé, L.; Schmeer, S. et al.
Optical low-cost and portable arrangement for full field 3D displacement measurement using a single camera
Measurement Science and Technology. Bd. 27. H. 11. IOP 2016 115901

Heimbs, S.; Hoffmann, M.; Waimer, M. et al.
Dynamic testing and modelling of composite fuselage frames and fasteners for aircraft crash simulations
International Journal of Crashworthiness. Bd. 18. H. 4. Informa UK Limited 2013 S. 406 - 422

Schmeer, Sebastian; Balle, Frank; Didi, Mirja et al.
Experimental and Computational Analysis of Multi-Spot Welded Hybrid Al/CFRP-Structures on Component Level
Advanced Engineering Materials. Bd. 15. H. 9. Wiley 2013 S. 868 - 873

Schmeer, Sebastian; Balle, Frank; Didi, Mirja et al.
Experimental and Numerical Characterization of Spot Welded Hybrid Al/CFRP-Joints on Coupon Level
Advanced Engineering Materials. Bd. 15. H. 9. Wiley 2013 S. 853 - 860

Hübler, M.; Gurka, Martin; Schmeer, Sebastian et al.
Performance range of SMA actuator wires and SMA–FRP structure in terms of manufacturing, modeling and actuation
Smart Materials and Structures. Bd. 22. H. 9. IOP Publishing 2013 S. 94002

Hübler, Moritz; Nissle, Sebastian; Gurka, Martin et al.
Smart Crash Management by Switching the Crash Behavior of Fiber-Reinforced Plastic (FRP) Energy Absorbers With Shape Memory Alloy (SMA) Wires
Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation. Snowbird: American Society of Mechanical Engineers 2013

Heimbs, Sebastian; Schmeer, Sebastian; Blaurock, Jörg et al.
Static and dynamic failure behaviour of bolted joints in carbon fibre composites
Composites Part A: Applied Science and Manufacturing. Bd. 47. Elsevier Ltd. 2013 S. 91 - 101

Gurka, Martin; Hübler, Moritz; Schmeer, Sebastian et al.
Load-Initiated Two-Way Effect of Shape Memory Alloys in Composite Structures and a Phenomenological Modelling Approach
Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Structural Health Monitoring. Stone Mountain: American Society of Mechanical Engineers 2012

Balle, Frank; Schmeer, Sebastian; Wagner, Guntram
Mechanische Charakterisierung ultraschallgeschweißter Aluminium/CFK-Verbunde bei automobilrelevanten Temperaturen und Prüfgeschwindigkeiten
Materials Testing. Bd. 53. H. 1-2. Carl Hanser Verlag 2011 S. 7 - 13

Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten Hybridverbindungen
Kaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)

Schmeer, Sebastian
Experimentelle und simulative Analysen von induktionsgeschweißten Hybridverbindungen
Kaiserslautern: IVW 2009 127 S. (IVW-Schriftenreihe ; Bd. 89)

Schmeer, Stefan; Steeg, M.; Maier, M. et al.
Metal Fibre Reinforced Composite – Potentialities and Tasks
Advanced Composites Letters. Bd. 18. H. 2. SAGE Publications 2009 S. 45 - 52

Heimbs, Sebastian; Schmeer, Sebastian; Middendorf, Peter et al.
Strain rate effects in phenolic composites and phenolic-impregnated honeycomb structures
Composites Science and Technology. Bd. 67. H. 13. Elsevier B.V. 2007 S. 2827 - 2837