Prof. Dr.-Ing. Prof.h.c. (RGU) Jens Schuster - Publikationen

Kovuru, Rahul; Schuster, Jens
Enhancing mechanical properties of hemp and sisal fiber-reinforced composites through alkali and fungal treatments for sustainable applications
Journal of Manufacturing and Materials Processing. Bd. 191. H. 9. MDPI 2025 S. 1 - 21

Mehta, Sarthak; Schuster, Jens
Exploring the potential of chicken feather-reinforced thermoplastic polyurethane composites for sustainable materials
Journal of Material Science and Technology Research. Bd. 12. Zeal-Press 2025 S. 13 - 21

Allu, Praveen Kumar; Schuster, Jens; Hussung, Raphael et al.
Quantitative evaluation and comparison of terahertz and ultrasonic testing of glass-fiber reinforced plastics
Proceedings "The Twenty Fourth International Conference on Composite Materials. Baltimore, MD, USA. 2025

Tirupathi, Mani Bh.; Shaik, Yousuf P.; Schuster, Jens
Comparison of DOE Programs
OALib. Bd. 11. H. 3. Scientific Research Publishing, Inc. 2024 S. 1 - 20

Chakarala, Vamsi; Schuster, Jens; Shaik, Yousuf P.
Development and Characterization of Flax-Gypsum Composites
Journal of Composites Science. Bd. 8. H. 1. MDPI 2024 S. 27

Papaiya, Vinay; Schuster, Jens; Shaik, Yousuf P.
Development of a Side Door Composite Impact Beam for the Automotive Industry
Open Journal of Composite Materials. Bd. 14. H. 1. Scientific Research Publishing Inc. 2024 S. 1 - 14

Tammali, Praveen Kumar; Schuster, Jens; Shaik, Yousuf Pasha
Development of Eco-Friendly Composite Material for Pinewood Replacement Using Agricultural Waste
Open Access Library Journal. Bd. 11. H. 12. 2024 S. 1 - 25

Madda, Girish Kumar Reddy; Schuster, Jens; Shaik, Yousuf Pasha
Development of Morus alba Reinforced Poly-Lactic Acid with Elevated Mechanical and Thermal Properties
Materials Sciences and Applications. Bd. 15. H. 7. MDPI 2024 S. 186 - 200

Konda, Gopi K.; Schuster, Jens; Shaik, Yousuf P.
Enhancing Stress Intensity Factor Reduction in Cracks Originating from a Circular Hole in a Rectangular Plate under Uniaxial Stress through Piezoelectric Actuation
Materials Sciences and Applications. Bd. 15. H. 1. Scientific Research Publishing, Inc. 2024 S. 1 - 14

Bangaru, Praneeth D.; Schuster, Jens; Shaik, Yousuf P. et al.
Evaluation of Mechanical Properties and Hydrophilicity of Alkaline and Plasma Treated Abaca Fiber Epoxy Composite with Mineral Waste as Fillers
Journal of Material Science and Technology Research. Bd. 11. Zeal Press 2024 S. 15 - 24

Kopparthi, Nandavardhan Reddy; Schuster, Jens; Shaik, Yousuf Pasha
Fabrication and Characterization of Bamboo - Epoxy Reinforced Composite for Thermal Insulation
Open Journal of Composite Materials. Bd. 14. Scientific Research Publishing 2024 S. 15 - 32

Ramisetty, Yeswanth T.; Schuster, Jens; Shaik, Yousuf P.
Investigating the Impact of 3D Printing Parameters on Hexagonal Structured PLA+ Samples and Analyzing the Incorporation of Sawdust and Soybean Oil as Post-Print Fillers
Journal of Manufacturing and Materials Processing. Bd. 8. H. 5. MDPI AG 2024 S. 193

Gottmann, Jörg; Müller, David; Vestner, Jochen et al.
Investigation of aroma carryover risk in a pilot plant and on industrial scale when bottling aromatised and subsequent regular wines on the same filling line
OENO One. Bd. 58. H. 3. Universite de Bordeaux 2024 S. 1

Gottmann, Jörg; Müller, David; Vestner, Jochen et al.
Investigation of aroma carryover risk in a pilot plant and on industrial scale when bottling aromatised and subsequent regular wines on the same filling line
OENO ONE. Bd. 58. H. 3. 2024 S. 1 - 12

Karedla, Anil B.; Schuster, Jens; Shaik, Yousuf P.
Possibility of Making Plastic Roof Tiles from Waste Plastic, Sand, and Fly Ash
Construction Materials. Bd. 4. H. 3. MDPI AG 2024 S. 597 - 610

Gummadavalli, Gopinath; Schuster, Jens; Shaik, Yousuf P.
Development of “Cissus quadrangularis” Composite Material with Elevated Mechanical Properties and Thermal Stability
Journal of Composites Science. Bd. 7. H. 11. MDPI 2023 S. 445

Jeyakanthan, Desh M.; Schuster, Jens; Shaik, Yousuf P.
Development of Ecological Absorbent Core Sanitary Pads in Combination of Kenaf and Chitosan Fibers
Materials Sciences and Applications. Bd. 14. H. 7. Scientific Research Publishing, Inc. 2023 S. 363 - 381

Koppula, Naveen K.; Schuster, Jens; Shaik, Yousuf P.
Fabrication and Experimental Analysis of Bricks Using Recycled Plastics and Bitumen
Journal of Composites Science. Bd. 7. H. 3. MDPI 2023 S. 111

Shaik, Yousuf Pasha; Schuster, Jens
High pressure FDM-3-D-printing in a nitrogen atmosphere
Proceedings "The Twenty Third International Conference on Composite Materials". Belfast, United Kingdom. 2023

Lutz, Johannes; Gebhard, Andreas; Zipp, Frank et al.
Investigation of the impact of the fluorine-content of ski wax on the friction between ice and ski base using a novel tribometer
Tribology International. Bd. 187. Elsevier B.V. 2023 108705

Schuster, Jens; Lutz, Johannes; Keller, Andreas et al.
THz on Ice – Terahertzmessung zur Bestimmung der Wasserfilmdicke auf Eis
Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP Jahrestagung) 2023. Friedrichshafen, Deutschland. 2023

Shaik, Yousuf Pasha; Schuster, Jens; Seemala, Srinivas et al.
3D Printing in High Ambient Pressure and Analysis of Parts Printed with Minimum or No Base Support
International Journal of Polymer and Textile Engineering. Bd. 9. H. 2. Seventh Sense Research Group Journals (SSRG) 2022 S. 17 - 24

Shaik, Yousuf Pasha; Schuster, Jens; Katherapalli, Harshavardhan Reddy et al.
3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed Parts
Journal of Composites Science. Bd. 6. H. 1. MDPI AG 2022 16

Reddy Palle, Rajashekar; Schuster, Jens; Pasha Shaik, Yousuf et al.
Fabrication and Characterization of Glass Fiber with SiC Reinforced Polymer Composites
Open Journal of Composite Materials. Bd. 12. H. 01. Scientific Research Publishing, Inc. 2022 S. 16 - 29

Thakur, Akhilesh Kumar; Schuster, Jens; Shaik, Yousuf Pasha
Fabrication and Characterization of Hybrid Bio-Composites Using Braided Natural Fibers and Aligned Thermoplastic Filaments
Journal of Composites Science. Bd. 6. H. 10. MDPI AG 2022 S. 291

Gottmann, Jörg; Müller, David; Becker, Anna Maria et al.
Improved sealing polymers and cleaning procedures to mitigate aroma carryover during bottling of aromatised and regular wines on the same filling line
OENO One. Bd. 56. H. 4. Universite de Bordeaux 2022 S. 41 - 54

Shaik, Shameem Akthar; Schuster, Jens; Shaik, Yousuf Pasha et al.
Manufacturing of Biocomposites for Domestic Applications Using Bio-Based Filler Materials
Journal of Composites Science. Bd. 6. H. 3. MDPI AG 2022 78

Müller, David; Gottmann, Jörg; Lutz, Johannes et al.
Modification of EPDM Seals to Prevent Aroma Carry-Over during the Bottling of Wine
Advanced Industrial and Engineering Polymer Research. Bd. 5. H. 4. Elsevier B.V. 2022 S. 270 - 281

Shaik, Yousuf Pasha; Schuster, Jens; Katherapalli, Harshavardhan Reddy et al.
Process Development of Additive Manufacturing Using Variable Pressure Conditions
Design and Technology. Bd. 88. H. 130. 2022 S. 23 - 35

Schuster, Jens; Lutz, Johannes; Shaik, Yousuf Pasha et al.
Recycling of Fluoro-Carbon-Elastomers : A review
Advanced Industrial and Engineering Polymer Research. Bd. 5. H. 4. Elsevier B.V. 2022 S. 248 - 254

Tadala, Lavanya; Schuster, Jens; Wittwer, Wolfgang
Surface Modification of Plasticized PLA by N2 Plasma to Improve the Barrier Properties
Journal of Advanced Materials Science and Engineering. Bd. 2. H. 1. SciVision 2022 1010

Modugu, Shiva Chandan Reddy; Schuster, Jens; Shaik, Yousuf Pasha
Synthesis and Characterization of Carbon Fiber Nanocomposite Using Titanium Dioxide and Silicon Carbide Nanomaterials
Journal of Composites Science. Bd. 10. H. 6. MDPI 2022 S. 312

Shaik, Yousuf Pasha; Schuster, Jens; Shaik, Aarif
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM Processes
Open Access Library Journal. Bd. 8. Scientific Research Publishing 2021 e7698

Vijaybhaskar, Narlakantin; Schuster, Jens; Shaik, Yousuf Pasha
Design Optimization and Steady-State Analysis of a Wheel Rim
International Journal of Mechanical and Production Engineering Research and Development. Bd. 11. H. 2. TJPRC PVT. LTD. 2021 S. 41 - 50

Shaik, Yousuf Pasha; Schuster, Jens; Shaik, Aarif et al.
Effect of Autoclave Pressure and Temperature on Consolidation of Layers and Mechanical Properties of Additively Manufactured (FDM) Products with PLA
Journal of Manufacturing and Materials Processing. Bd. 5. H. 4. MDPI AG 2021 114

Pipalla, Raghuram; Schuster, Jens; Shaik, Yousuf Pasha
Experimental Analysis on 3d Printed Onyx Specimens with Honeycomb Infill Structure
Journal of Advanced Materials Science and Engineering. Bd. 1. H. 1. 2021 S. 1 - 10

Shaik, Yousuf Pasha; Schuster, Jens; Tummala, Ram Chowdary
Impact of 3D printing patterns and post-consolidation pressure on mechanical properties of FDM printed samples
American Research Journal of Materials Science. Bd. 2. 2021 S. 1 - 10

Shaik, Yousuf Pasha; Narlakanti, Vijay Bhaskar; Schuster, Jens
Study of the tensile and impact energy absorption properties of hybrid bast and basalt fiber composites and the effect of basalt fibers size at the mechanical properties
Research Square: Research Square Platform LLC 2021

Gottmann, Jörg; Vestner, Jochen; Müller, David et al.
Uptake and Release of Aroma Compounds by an Ethylene Propylene Diene Monomer Rubber Sealing Polymer: Investigating Aroma Carryover in a Model Wine System
Journal of Agricultural and Food Chemistry. Bd. 69. H. 38. American Chemical Society (ACS) 2021 S. 11382 - 11394

Schuster, Jens
Самоадаптивное демпфирование кроссовок с использованием электроактивных полимеров
МАЛЫЙ  БИЗНЕС: СЕКРЕТЫ ПРОФЕССИОНАЛЬНОГО УСПЕХА“, (Hrsg). Moskau. 2021

Schuster, Jens; Kazmi, S.M.R.; Lutz, J.
Exploring the potential to uniquely manufacture curved VARTM epoxy composites using cost-effective FDM-molds
Open Journal of Composite Materials. Bd. 10. H. 3. 2020 S. 45 - 65

Schuster, Jens; Chen, M.H.; Govignon, Q.
As­sess­ment of adhe­si­ve bond qua­li­ty by using ult­ra­sonic tes­ting com­bi­ned with pat­tern re­cog­ni­ti­on
"The Twen­ty Se­cond In­ter­na­tio­nal Con­fe­rence on Compo­site Ma­te­ri­als" (Hrsg). Mel­bourne. 2019

Schuster, Jens; Motsch, N.; Hausmann, J. et al.
Com­pa­ra­ti­ve study on the da­ma­ge to­le­ran­ce of ther­mo­set and ther­moplas­tic glass-fi­ber rein­for­ced plas­tics
"The Twen­ty Se­cond In­ter­na­tio­nal Con­fe­rence on Compo­site Ma­te­ri­als" (Hrsg). Mel­bourne. 2019

Schuster, Jens; Lutz, J.
Eva­lu­ie­rung ei­nes Eis­tri­bo­me­ters - Tri­bo­lo­gi­sche Un­ter­su­chun­gen an ult­ra­hochmo­le­ku­la­rem Po­ly­ethy­len auf Eis
"Snowstorm-Kon­fe­renz" (Hrsg). Karlsruhe. 2019

Schuster, Jens; Chen, M.H.; Govignon, Q.
Kis­sing Bonds - Ge­ziel­te Her­stel­lung und De­tek­ti­on mit Ult­ra­schall
"DACH-Kon­fe­renz" (Hrsg). Friedrichshafen. 2019

Schuster, Jens; Höfler, G.; Lin, R. et al.
Lightweight Design of rotational moulded parts with ultrathin fibres
Proceedings of the International Kossigyn-Forum (Hrsg). Moskau. 2019 S. 166 - 172

Schuster, Jens; Müller, David; Chen, Ming-Hong et al.
Ultrasonic testing combined with pattern recognition for the detection of kissing bonds
Open Journal of Composite Materials. Bd. 9. 2019 S. 260 - 270

Schuster, J.; Breuer, U. P.; Balle, F. et al.
Hybridisa­ti­on of CFRP by the use of con­ti­nuous me­tal fi­bres (MCFRP) for da­ma­ge to­le­rant and electri­cal­ly con­duc­ti­ve light­weight struc­tu­res
Com­po­si­te Struc­tu­res. Bd. 172. 2017 S. 374 - 382

Schuster, Jens; Schütz, Martin
Modelling of thermal conductivity of carbon fibre composites with inhomogeneous heat flux in out-of-plane direction
"Twentyfifth International Symposium on Processing and Fabrication of Advanced Materials" (Hrsg). Auckland. 2017

Schuster, Jens; Schütz, Martin
A comprehensive strategy to increase the out-of-plane thermal conductivity of carbon fiber composites processed by vacuum assisted resin transfer molding
17th European Conference on Composite Materials. Bd. ECCM17. München. 2016

Srinivasan, M.; Maettig, P.; Glitza, K. W. et al.
Out of Plane Thermal Conductivity of Carbon Fiber Reinforced Composite Filled with Diamond Powder
Open Journal of Composite Materials. Bd. 06. H. 02. Scientific Research Publishing, Inc, 2016 S. 41 - 57

Schuster, Jens; Schütz, Martin; Lutz, Johannes et al.
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber  Composites Produced by VARTM
Open Journal of Composite Materials. Bd. 6. H. 4. Scientific Research Publishing, Inc. 2016 S. 100 - 111

Schuster, J.; Schütz, M.; Lutz, M. et al.
Prediction of the Enhanced Out-of-plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM
Open Journal of Composite Materials. Bd. 6. 2016 S. 100 - 111

Schuster, J.; Kazmi, S. M. R.; Lutz, J.
Manufacturing and testing of curved fiber composites using vacuum assisted resin transfer moulding (VARTM)
The Twentieth International Conference on Composite Materials (Hrsg). ICCM20. Aufl. Aalborg. 2015

Schuster, Jens
Strategies to increase mechanical properties of rotationally moulded parts
University of Auckland (Hrsg). Centre for Advanced Composite Materials (CACM). Auckland. 2015

Schuster, J.; Govignon, Q.; Bickerton, S.
Processability of biobased thermoset resinsand flax fibres reinforcements using vacuum assisted resin transfer moulding
Open Journal of Composite Materials. Bd. 4. 2014 S. 1 - 11

Schuster, Jens
Ultrasonic testing of thin-walled filament-wound CFRP-tubes by means of double-through transmission technique
The Ninetienth International Conference on Composite Materials - ICCM19. Montreal. 2013

Schuster, Jens; Govignon, Q.; Bickerton, S.
Biobased thermoset resinsand flax fibre reinforcements processed by vacuum assisted resin transfer moulding
Eleventh Internatinal Conference on Flow Processing in Composite Materials - FPCM11 (Hrsg). Auckland. 2012

Schuster, J.; Duhovic, M.; Bhattacharyya, D.
Manufacturing and Processing of Polymer Composites
Bhattacharyya, Debes ; Fakirov, Stoyko (Hrsg). Synthetic Polymer-Polymer Composites. München: Carl Hanser Verlag GmbH & Co. KG 2012 S. 1 - 38

Schuster, Jens; Heider, D.; Sharp, K. et al.
Out-of-plane thermal conductivities of three-dimensionally woven fabric composites
Nineteenth International Symposium on Processing and Fabricatiuon of Advanced Materials - PFAM19 (Hrsg). Auckland. 2011

Schuster, Jens; Govignon, Q.; Bickerton, S. et al.
Vacuum assisted resin transfer molding with biobased resins and natural fibre reinforcement
The Eighttenth International Conference on Composite Materials - ICCM18 (Hrsg). Jeju. 2011

Schuster, J.; Seegmüller, S.
Besserer Brandschutz für Flüssigholz (WPC) durch Beschichtung
Holz-Zentralblatt. Bd. 136. H. 19. 2010 S. 490

Schuster, Jens
Methodische Konstruktion von Faserverbundbauteilen
GAK Gummi Fasern Kunststoffe. Bd. 63. H. 4. 2010 S. 231 - 235

Schuster, Jens; Heider, D.; Sharp, K. et al.
Analysis of out-of-plane thermal conductivities of three-dimensionally woven fabric composites
The Sevententh International Conference on Composite Materials - ICCM17 (Hrsg). Edinburgh. 2009

Schuster, Jens; Heider, Dirk; Sharp, Keith et al.
Measuring and modeling the thermal conductivities of three-dimensionally woven fabric composites
Mechanics of composite materials. Bd. 45. H. 2. New York: Faraday Press 2009 S. 165 - 174

Schuster, Martina; Ogale, Amol; Peetz, Ludwig et al.
Analysis of sewed preforms by visual on-line monitoring of stitch-hole variations under compaction
Composite Science and Technology. Bd. 68. H. 1. 2008 S. 312 - 320

Schuster, Jens; Heider, Dirk; Sharp, Kendra et al.
Measuring and modeling of thermal conductivities of three-dimensionally woven fabric composites
Mechanics of Composite Materials. Bd. 45. H. 2. 2008 S. 165 - 174

Schuster, M.; Ogale, A.; Peetz, L. et al.
Qualitative analysis of sewed preforms by visual online-monitoring of stitch-hole variation under compaction
Composite Science and Technology. Bd. 68. H. 1. 2008 S. 312 - 320

Schuster, Jens; Heider, Dirk; Sharp, Keith et al.
Thermal conductivities of three-dimensionally woven fabric composites
Composites science and technology. Bd. 68. H. 9. Barking: Elsevier 2008 S. 2085 - 2091

Riedler, Marc; Schuster, Jens
Das Echo der Naht - jetzt einfach und schnell Schweißnähte in Kunststoffen zerstörungsfrei prüfen
Konstruktionspraxis : Automation, Antriebe, Maschinenelemente, Werkstoffe, CAD. Bd. 2007. H. 6. Würzburg: Vogel 2007 S. 76 - 78

Schuster, Jens
Thermal conductivity of three-dimensionally reinforced composites
University of Delaware (Hrsg). Center for Composite Materials. Newark. 2007

Schuster, J.; Sharp, K.; Heider, D. et al.
Through-thickness thermal conductivity in composites based on 3-D fiber architectures
SAE Technical Paper (Hrsg). Bd. 1. Los Angeles. 2007 3931

Bender, Dominik; Schuster, Jens; Heider, Dirk
Flow rate control during vacuum-assisted resin transfer molding (VARTM) processing
Composites science and technology : an international journal. Bd. 66. H. 13. Barking: Elsevier 2006 S. 2265 - 2271

Schuster, Jens; Neu, Christian
Wood-filled thermoplastics: no all-purpose fire protection
Kunststoffe <München> / Kunststoffe international. Bd. 96. H. 6. München: Hanser 2006 S. 182 - 186

Schuster, Jens
When material data face reality at the example of a built catapult
Proceedings Seventh World Pultrusion Conference (WPC7). Bd. 20. Amsterdam. 2004

Schuster, Jens; Trahan, Martina; Heider, Dirk et al.
Influence of the fabric ties on the performance of woven-in optical fibers
Composites : A, Applied science and manufacturing. Bd. 34. H. 9. Oxford u.a.: Elsevier 2003 S. 855 - 862

Schuster, Jens
Polypropylene Reinforced with Chicken Feathers
Proceedings The Fourtenth International Conference on Composite Materials (ICCM). Bd. 1740. San Diego. 2003

Schuster, Jens
Einsatz von phase changing materials im Schuhbereich
Proceedings Materialien - die Rolle von Textilien zur Verbesserung der Lebensfunktionen von Menschen in der Umwelt,. Nr. 63-73. Aufl. Moskau. 2002

Schuster, Jens; Mang, Peter
Neue Offenheit - mit Benchmarking zur sicheren Zertifizierung
Qualität und Zuverlässigkeit : QZ ; Qualitätsmanagement in Industrie und Dienstleistung. Bd. 46. H. 12. München: Hanser 2001 S. 1530 - 1534

Schuster, Jens
Selbst verspannende Laubholzdübel aus Flüssigholz
Holz-Zentralblatt. Bd. 139. H. 11. 2001 S. 1742