Institut für Kunststofftechnik Westpfalz (IKW)
Hochschule Kaiserslautern
- 06331/2483-49
- 06331/2483-40
Tirupathi, Mani Bharadwaj; Shaik, Yousuf Pasha; Schuster, Jens
Comparison of DOE ProgramsOALib. Bd. 11. H. 03. Scientific Research Publishing, Inc. 2024 S. 1 - 20
Chakarala, Vamsi; Schuster, Jens; Shaik, Yousuf P.
Development and Characterization of Flax-Gypsum CompositesJournal of Composites Science. Bd. 8. H. 1. MDPI 2024 S. 27
Papaiya, Vinay; Schuster, Jens; Shaik, Yousuf P.
Development of a Side Door Composite Impact Beam for the Automotive IndustryOpen Journal of Composite Materials. Bd. 14. H. 1. Scientific Research Publishing Inc. 2024 S. 1 - 14
Konda, Gopi K.; Schuster, Jens; Shaik, Yousuf P.
Enhancing Stress Intensity Factor Reduction in Cracks Originating from a Circular Hole in a Rectangular Plate under Uniaxial Stress through Piezoelectric ActuationMaterials Sciences and Applications. Bd. 15. H. 1. Scientific Research Publishing, Inc. 2024 S. 1 - 14
Kopparthi, Nandavardhan R.; Schuster, Jens; Shaik, Yousuf P.
Fabrication and Characterization of Bamboo-Epoxy Reinforced Composite for Thermal InsulationOpen Journal of Composite Materials. Bd. 14. H. 1. Scientific Research Publishing Inc. 2024 S. 15 - 32
Gummadavalli, Gopinath; Schuster, Jens; Shaik, Yousuf P.
Development of “Cissus quadrangularis” Composite Material with Elevated Mechanical Properties and Thermal StabilityJournal of Composites Science. Bd. 7. H. 11. MDPI 2023 S. 445
Jeyakanthan, Desh M.; Schuster, Jens; Shaik, Yousuf P.
Development of Ecological Absorbent Core Sanitary Pads in Combination of Kenaf and Chitosan FibersMaterials Sciences and Applications. Bd. 14. H. 7. Scientific Research Publishing, Inc. 2023 S. 363 - 381
Koppula, Naveen K.; Schuster, Jens; Shaik, Yousuf P.
Fabrication and Experimental Analysis of Bricks Using Recycled Plastics and BitumenJournal of Composites Science. Bd. 7. H. 3. MDPI 2023 S. 111
Lutz, Johannes; Gebhard, Andreas; Zipp, Frank et al.
Investigation of the impact of the fluorine-content of ski wax on the friction between ice and ski base using a novel tribometerTribology International. Bd. 187. Elsevier B.V. 2023 108705
Shaik, Yousuf Pasha; Schuster, Jens; Seemala, Srinivas et al.
3D Printing in High Ambient Pressure and Analysis of Parts Printed with Minimum or No Base SupportInternational Journal of Polymer and Textile Engineering. Bd. 9. H. 2. Seventh Sense Research Group Journals (SSRG) 2022 S. 17 - 24
Shaik, Yousuf Pasha; Schuster, Jens; Katherapalli, Harshavardhan Reddy et al.
3D Printing under High Ambient Pressures and Improvement of Mechanical Properties of Printed PartsJournal of Composites Science. Bd. 6. H. 1. MDPI AG 2022 16
Reddy Palle, Rajashekar; Schuster, Jens; Pasha Shaik, Yousuf et al.
Fabrication and Characterization of Glass Fiber with SiC Reinforced Polymer CompositesOpen Journal of Composite Materials. Bd. 12. H. 01. Scientific Research Publishing, Inc. 2022 S. 16 - 29
Thakur, Akhilesh Kumar; Schuster, Jens; Shaik, Yousuf Pasha
Fabrication and Characterization of Hybrid Bio-Composites Using Braided Natural Fibers and Aligned Thermoplastic FilamentsJournal of Composites Science. Bd. 6. H. 10. MDPI AG 2022 S. 291
Gottmann, Jörg; Müller, David; Becker, Anna Maria et al.
Improved sealing polymers and cleaning procedures to mitigate aroma carryover during bottling of aromatised and regular wines on the same filling lineOENO One. Bd. 56. H. 4. Universite de Bordeaux 2022 S. 41 - 54
Shaik, Shameem Akthar; Schuster, Jens; Shaik, Yousuf Pasha et al.
Manufacturing of Biocomposites for Domestic Applications Using Bio-Based Filler MaterialsJournal of Composites Science. Bd. 6. H. 3. MDPI AG 2022 78
Müller, David; Gottmann, Jörg; Lutz, Johannes et al.
Modification of EPDM Seals to Prevent Aroma Carry-Over during the Bottling of WineAdvanced Industrial and Engineering Polymer Research. Bd. 5. H. 4. Elsevier B.V. 2022 S. 270 - 281
Schuster, Jens; Lutz, Johannes; Shaik, Yousuf Pasha et al.
Recycling of Fluoro-Carbon-Elastomers : A reviewAdvanced Industrial and Engineering Polymer Research. Bd. 5. H. 4. Elsevier B.V. 2022 S. 248 - 254
Tadala, Lavanya; Schuster, Jens; Wittwer, Wolfgang
Surface Modification of Plasticized PLA by N2 Plasma to Improve the Barrier PropertiesJournal of Advanced Materials Science and Engineering. Bd. 2. H. 1. SciVision 2022 1010
Modugu, Shiva Chandan Reddy; Schuster, Jens; Shaik, Yousuf Pasha
Synthesis and Characterization of Carbon Fiber Nanocomposite Using Titanium Dioxide and Silicon Carbide NanomaterialsJournal of Composites Science. Bd. 10. H. 6. MDPI 2022 S. 312
Shaik, Yousuf Pasha; Schuster, Jens; Shaik, Aarif
A Scientific Review on Various Pellet Extruders Used in 3D Printing FDM ProcessesOpen Access Library Journal. Bd. 8. Scientific Research Publishing 2021 e7698
Schuster, Jens; Vijaybhaskar, N.; Shaik, Y.P.
Design Optimization and Steady-State Analysis of a Wheel RimInternational Journal of Mechanical and Production Engineering Research and Development. Bd. 11. H. 2. 2021 S. 41 - 50
Shaik, Yousuf Pasha; Schuster, Jens; Shaik, Aarif et al.
Effect of Autoclave Pressure and Temperature on Consolidation of Layers and Mechanical Properties of Additively Manufactured (FDM) Products with PLAJournal of Manufacturing and Materials Processing. Bd. 5. H. 4. MDPI AG 2021 114
Pipalla, Raghuram; Schuster, Jens; Shaik, Yousuf Pasha
Experimental Analysis on 3d Printed Onyx Specimens with Honeycomb Infill StructureJournal of Advanced Materials Science and Engineering. Bd. 1. H. 1. 2021 S. 1 - 10
Shaik, Yousuf Pasha; Narlakanti, Vijay Bhaskar; Schuster, Jens
Study of the tensile and impact energy absorption properties of hybrid bast and basalt fiber composites and the effect of basalt fibers size at the mechanical propertiesResearch Square: Research Square Platform LLC 2021
Gottmann, Jörg; Vestner, Jochen; Müller, David et al.
Uptake and Release of Aroma Compounds by an Ethylene Propylene Diene Monomer Rubber Sealing Polymer: Investigating Aroma Carryover in a Model Wine SystemJournal of Agricultural and Food Chemistry. Bd. 69. H. 38. American Chemical Society (ACS) 2021 S. 11382 - 11394
Schuster, Jens
Самоадаптивное демпфирование кроссовок с использованием электроактивных полимеровМАЛЫЙ БИЗНЕС: СЕКРЕТЫ ПРОФЕССИОНАЛЬНОГО УСПЕХА“, (Hrsg). Moskau. 2021
Schuster, Jens; Kazmi, S.M.R.; Lutz, J.
Exploring the potential to uniquely manufacture curved VARTM epoxy composites using cost-effective FDM-moldsOpen Journal of Composite Materials. Bd. 10. H. 3. 2020 S. 45 - 65
Schuster, Jens; Chen, M.H.; Govignon, Q.
Assessment of adhesive bond quality by using ultrasonic testing combined with pattern recognition"The Twenty Second International Conference on Composite Materials" (Hrsg). Melbourne. 2019
Schuster, Jens; Motsch, N.; Hausmann, J. et al.
Comparative study on the damage tolerance of thermoset and thermoplastic glass-fiber reinforced plastics"The Twenty Second International Conference on Composite Materials" (Hrsg). Melbourne. 2019
Schuster, Jens; Lutz, J.
Evaluierung eines Eistribometers - Tribologische Untersuchungen an ultrahochmolekularem Polyethylen auf Eis"Snowstorm-Konferenz" (Hrsg). Karlsruhe. 2019
Schuster, Jens; Chen, M.H.; Govignon, Q.
Kissing Bonds - Gezielte Herstellung und Detektion mit Ultraschall"DACH-Konferenz" (Hrsg). Friedrichshafen. 2019
Schuster, Jens; Höfler, G.; Lin, R. et al.
Lightweight Design of rotational moulded parts with ultrathin fibresProceedings of the International Kossigyn-Forum (Hrsg). Moskau. 2019 S. 166 - 172
Schuster, Jens; Müller, David; Chen, Ming-Hong et al.
Ultrasonic testing combined with pattern recognition for the detection of kissing bondsOpen Journal of Composite Materials. Bd. 9. 2019 S. 260 - 270
Schuster, J.; Breuer, U. P.; Balle, F. et al.
Hybridisation of CFRP by the use of continuous metal fibres (MCFRP) for damage tolerant and electrically conductive lightweight structuresComposite Structures. Bd. 172. 2017 S. 374 - 382
Schuster, Jens; Schütz, Martin
Modelling of thermal conductivity of carbon fibre composites with inhomogeneous heat flux in out-of-plane direction"Twentyfifth International Symposium on Processing and Fabrication of Advanced Materials" (Hrsg). Auckland. 2017
Schuster, Jens; Schütz, Martin
A comprehensive strategy to increase the out-of-plane thermal conductivity of carbon fiber composites processed by vacuum assisted resin transfer molding17th European Conference on Composite Materials. Bd. ECCM17. München. 2016
Srinivasan, M.; Maettig, P.; Glitza, K. W. et al.
Out of Plane Thermal Conductivity of Carbon Fiber Reinforced Composite Filled with Diamond PowderOpen Journal of Composite Materials. Bd. 06. H. 02. Scientific Research Publishing, Inc, 2016 S. 41 - 57
Schuster, Jens; Schütz, Martin; Lutz, Johannes et al.
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTMOpen Journal of Composite Materials. Bd. 6. H. 4. Scientific Research Publishing, Inc. 2016 S. 100 - 111
Schuster, J.; Schütz, M.; Lutz, M. et al.
Prediction of the Enhanced Out-of-plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTMOpen Journal of Composite Materials. Bd. 6. 2016 S. 100 - 111
Schuster, J.; Kazmi, S. M. R.; Lutz, J.
Manufacturing and testing of curved fiber composites using vacuum assisted resin transfer moulding (VARTM)The Twentieth International Conference on Composite Materials (Hrsg). ICCM20. Aufl. Aalborg. 2015
Schuster, Jens
Strategies to increase mechanical properties of rotationally moulded partsUniversity of Auckland (Hrsg). Centre for Advanced Composite Materials (CACM). Auckland. 2015
Schuster, J.; Govignon, Q.; Bickerton, S.
Processability of biobased thermoset resinsand flax fibres reinforcements using vacuum assisted resin transfer mouldingOpen Journal of Composite Materials. Bd. 4. 2014 S. 1 - 11
Schuster, Jens
Ultrasonic testing of thin-walled filament-wound CFRP-tubes by means of double-through transmission techniqueThe Ninetienth International Conference on Composite Materials - ICCM19. Montreal. 2013
Schuster, Jens; Govignon, Q.; Bickerton, S.
Biobased thermoset resinsand flax fibre reinforcements processed by vacuum assisted resin transfer mouldingEleventh Internatinal Conference on Flow Processing in Composite Materials - FPCM11 (Hrsg). Auckland. 2012
Schuster, J.; Duhovic, M.; Bhattacharyya, D.
Manufacturing and Processing of Polymer CompositesBhattacharyya, Debes ; Fakirov, Stoyko (Hrsg). Synthetic Polymer-Polymer Composites. München: Carl Hanser Verlag GmbH & Co. KG 2012 S. 1 - 38
Schuster, Jens; Heider, D.; Sharp, K. et al.
Out-of-plane thermal conductivities of three-dimensionally woven fabric compositesNineteenth International Symposium on Processing and Fabricatiuon of Advanced Materials - PFAM19 (Hrsg). Auckland. 2011
Schuster, Jens; Govignon, Q.; Bickerton, S. et al.
Vacuum assisted resin transfer molding with biobased resins and natural fibre reinforcementThe Eighttenth International Conference on Composite Materials - ICCM18 (Hrsg). Jeju. 2011
Schuster, J.; Seegmüller, S.
Besserer Brandschutz für Flüssigholz (WPC) durch BeschichtungHolz-Zentralblatt. Bd. 136. H. 19. 2010 S. 490
Schuster, Jens
Methodische Konstruktion von FaserverbundbauteilenGAK Gummi Fasern Kunststoffe. Bd. 63. H. 4. 2010 S. 231 - 235
Schuster, Jens; Heider, D.; Sharp, K. et al.
Analysis of out-of-plane thermal conductivities of three-dimensionally woven fabric compositesThe Sevententh International Conference on Composite Materials - ICCM17 (Hrsg). Edinburgh. 2009
Schuster, Jens; Heider, D.; Sharp, K. et al.
Measuring and modeling of thermal conductivities of three-dimensionally woven fabric compositesMechanics of Composite Materials. Bd. Vol. 45. H. Nr. 2. 2008 S. 165 - 174
Schuster, Jens; Peetz, L.; Schuster, M. et al.
Qualitative analysis of sewed preforms by visual online-monitoring of stitch-hole variation under compactionComposite Science and Technology. Bd. Vol. 68. H. 1. 2008 S. 312 - 320
Schuster, Jens
Thermal conductivity of three-dimensionally reinforced compositesUniversity of Delaware (Hrsg). Center for Composite Materials. Newark. 2007
Schuster, Jens; Sharp, K.; Heider, D. et al.
Through-thickness thermal conductivity in composites based on 3-D fiber architecturesSAE 2007 AeroTech Congress & Exhibition (Hrsg). Bd. Nr. 07ATC-212. Los Angeles. 2007
Schuster, Jens
When material data face reality at the example of a built catapultProceedings Seventh World Pultrusion Conference - WPC7. H. Nr. 20. Amsterdam. 2004
Schuster, Jens
Polypropylene Reinforced with Chicken FeathersProceedings The Fourtenth International Conference on Composite Materials - ICCM14. H. Nr. 1740. San Diego. 2003
Schuster, Jens
Einsatz von phase changing materials im SchuhbereichProceedings Materialien - die Rolle von Textilien zur Verbesserung der Lebensfunktionen von Menschen in der Umwelt,. Nr. 63-73. Aufl. Moskau. 2002
Schuster, Jens
Selbst verspannende Laubholzdübel aus FlüssigholzHolz-Zentralblatt. Bd. Vol. 139. H. Nr. 11. 2001 S. 1742